lkml.org 
[lkml]   [2017]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] dt-bindings: ata: add DT bindings for ahci-dm816 SATA controller
2017-03-13 18:27 GMT+01:00 Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>:
> On 03/13/2017 08:08 PM, Bartosz Golaszewski wrote:
>
>>>> Add DT bindings for the onboard SATA controller present on the DM816x
>>>> SoCs.
>>>>
>>>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>>> ---
>>>> Documentation/devicetree/bindings/ata/ahci-dm816.txt | 20
>>>> ++++++++++++++++++++
>>>> 1 file changed, 20 insertions(+)
>>>> create mode 100644 Documentation/devicetree/bindings/ata/ahci-dm816.txt
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/ata/ahci-dm816.txt
>>>> b/Documentation/devicetree/bindings/ata/ahci-dm816.txt
>>>> new file mode 100644
>>>> index 0000000..b87ed5a
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/ata/ahci-dm816.txt
>>>> @@ -0,0 +1,20 @@
>>>> +Device tree binding for the TI DM816 AHCI SATA Controller
>>>> +---------------------------------------------------------
>>>> +
>>>> +Required properties:
>>>> + - compatible: must be "ti,dm816-ahci"
>>>> + - reg: physical base address and size of the register region used by
>>>> + the controller (as defined by the AHCI 1.1 standard)
>>>> + - interrupts: interrupt specifier (refer to the interrupt binding)
>>>> + - clocks: clock specifiers (refer to the clock binding); two clocks
>>>
>>>
>>>
>>> There should be a phandle preceding the clock specifier, all new such
>>> props are different to the old "interrupts" (which had phandle in a
>>> separate
>>> "interrupt-parent" prop).
>
>
>> I'm afraid I don't understand - could you point me to an example?
>
>
> Have you read Documentation/devicetree/bindings/clock/clock-bindings.txt,
> on clock consumers?

Yes I have. It says:

66 clocks: List of phandle and clock specifier pairs, one pair
67 for each clock input to the device. Note: if the
68 clock provider specifies '0' for #clock-cells, then
69 only the phandle portion of the pair will appear.

> In fact, your own example below doesn't have clock specifiers, only
> phandles.
>

Since the SATA reference clock specifies 0 for #clock-cells I'll omit
the clock specifier. On the other hand: I'll rephrase the clocks
property description in the bindings for clarity.

Thanks,
Bartosz

\
 
 \ /
  Last update: 2017-03-14 11:44    [W:0.050 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site