lkml.org 
[lkml]   [2017]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] dt-bindings: ata: add DT bindings for ahci-dm816 SATA controller
From
Date
On 03/13/2017 06:27 PM, Sergei Shtylyov wrote:
> On 03/13/2017 08:08 PM, Bartosz Golaszewski wrote:
>
>>>> Add DT bindings for the onboard SATA controller present on the DM816x
>>>> SoCs.
>>>>
>>>> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
>>>> ---
>>>> Documentation/devicetree/bindings/ata/ahci-dm816.txt | 20
>>>> ++++++++++++++++++++
>>>> 1 file changed, 20 insertions(+)
>>>> create mode 100644 Documentation/devicetree/bindings/ata/ahci-dm816.txt
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/ata/ahci-dm816.txt
>>>> b/Documentation/devicetree/bindings/ata/ahci-dm816.txt
>>>> new file mode 100644
>>>> index 0000000..b87ed5a
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/ata/ahci-dm816.txt
>>>> @@ -0,0 +1,20 @@
>>>> +Device tree binding for the TI DM816 AHCI SATA Controller
>>>> +---------------------------------------------------------
>>>> +
>>>> +Required properties:
>>>> + - compatible: must be "ti,dm816-ahci"
>>>> + - reg: physical base address and size of the register region used by
>>>> + the controller (as defined by the AHCI 1.1 standard)
>>>> + - interrupts: interrupt specifier (refer to the interrupt binding)
>>>> + - clocks: clock specifiers (refer to the clock binding); two clocks
>>>
>>>
>>> There should be a phandle preceding the clock specifier, all new such
>>> props are different to the old "interrupts" (which had phandle in a separate
>>> "interrupt-parent" prop).
>
>> I'm afraid I don't understand - could you point me to an example?
>
> Have you read Documentation/devicetree/bindings/clock/clock-bindings.txt, on clock consumers?
> In fact, your own example below doesn't have clock specifiers, only phandles.

Hi Sergei,

I think it's perfectly clear since he mentions the "clock bindings", so it's clear the clocks
property must conform to the bindings described in the clock/clock-bindings.txt file.
The term "specifier" is alone not very clear, but it used as is in plenty of other
bindings files about this clocks property (i.e imx-sata.txt, ahci-fsl-qoriq.txt, ahci-ceva.txt).

And it's perfectly allowed to only have a single phandle without any arguments, as described
in the clock bindings actually.

Thanks,
Neil

>
>>>> + must be specified: the functional clock and an external
>>>> + reference clock
>>>> +
>>>> +Example:
>>>> +
>>>> + sata: sata@4a140000 {
>>>> + compatible = "ti,dm816-ahci";
>>>> + reg = <0x4a140000 0xffff>;
> [...]
>>>> + interrupts = <16>;
>>>> + clocks = <&sysclk5_ck>, <&sata_refclk>;
>>>> + };
>>>>
>
>> Thanks,
>> Bartosz Golaszewski
>
> MBR, Sergei
>

\
 
 \ /
  Last update: 2017-03-14 10:08    [W:0.056 / U:0.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site