lkml.org 
[lkml]   [2017]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 14/36] [media] v4l2-mc: add a function to inherit controls from a pipeline
Date


On 03/11/2017 10:59 AM, Russell King - ARM Linux wrote:
> On Sat, Mar 11, 2017 at 10:54:55AM -0800, Steve Longerbeam wrote:
>>
>>
>> On 03/11/2017 10:45 AM, Russell King - ARM Linux wrote:
>>> I really don't think expecting the user to understand and configure
>>> the pipeline is a sane way forward. Think about it - should the
>>> user need to know that, because they have a bayer-only CSI data
>>> source, that there is only one path possible, and if they try to
>>> configure a different path, then things will just error out?
>>>
>>> For the case of imx219 connected to iMX6, it really is as simple as
>>> "there is only one possible path" and all the complexity of the media
>>> interfaces/subdevs is completely unnecessary. Every other block in
>>> the graph is just noise.
>>>
>>> The fact is that these dot graphs show a complex picture, but reality
>>> is somewhat different - there's only relatively few paths available
>>> depending on the connected source and the rest of the paths are
>>> completely useless.
>>>
>>
>> I totally disagree there. Raw bayer requires passthrough yes, but for
>> all other media bus formats on a mipi csi-2 bus, and all other media
>> bus formats on 8-bit parallel buses, the conersion pipelines can be
>> used for scaling, CSC, rotation, and motion-compensated de-interlacing.
>
> ... which only makes sense _if_ your source can produce those formats.
> We don't actually disagree on that.

...and there are lots of those sources! You should try getting out of
your imx219 shell some time, and have a look around! :)

>
> Let me re-state. If the source can _only_ produce bayer, then there is
> _only_ _one_ possible path, and all the overhead of the media controller
> stuff is totally unnecessary.
>
> Or, are you going to tell me that the user should have the right to
> configure paths through the iMX6 hardware that are not permitted by the
> iMX6 manuals for the data format being produced by the sensor?

Anyway, no the user is not allowed to configure a path that is not
allowed by the hardware, such as attempting to pass raw bayer through
an Image Converter path.

I guess you are simply commenting that for users of bayer sensors, the
other pipelines can be "confusing". But I trust you're not saying those
other pipelines should therefore not be present, which would be a
completely nutty argument.

Steve

\
 
 \ /
  Last update: 2017-03-12 04:32    [W:0.153 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site