lkml.org 
[lkml]   [2017]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 3.2 102/199] ARM: 8634/1: hw_breakpoint: blacklist Scorpion CPUs
3.2.87-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Rutland <mark.rutland@arm.com>

commit ddc37832a1349f474c4532de381498020ed71d31 upstream.

On APQ8060, the kernel crashes in arch_hw_breakpoint_init, taking an
undefined instruction trap within write_wb_reg. This is because Scorpion
CPUs erroneously appear to set DBGPRSR.SPD when WFI is issued, even if
the core is not powered down. When DBGPRSR.SPD is set, breakpoint and
watchpoint registers are treated as undefined.

It's possible to trigger similar crashes later on from userspace, by
requesting the kernel to install a breakpoint or watchpoint, as we can
go idle at any point between the reset of the debug registers and their
later use. This has always been the case.

Given that this has always been broken, no-one has complained until now,
and there is no clear workaround, disable hardware breakpoints and
watchpoints on Scorpion to avoid these issues.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[bwh: Backported to 3.2:
- Open-code read_cpuid_part()
- Adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
arch/arm/include/asm/cputype.h | 3 +++
arch/arm/kernel/hw_breakpoint.c | 16 ++++++++++++++++
2 files changed, 19 insertions(+)

--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -25,6 +25,9 @@
#define CPUID_EXT_ISAR4 "c2, 4"
#define CPUID_EXT_ISAR5 "c2, 5"

+/* Qualcomm implemented cores */
+#define ARM_CPU_PART_SCORPION 0x510002d0
+
extern unsigned int processor_id;

#ifdef CONFIG_CPU_CP15
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -1001,6 +1001,22 @@ static int __init arch_hw_breakpoint_ini
return 0;
}

+ /*
+ * Scorpion CPUs (at least those in APQ8060) seem to set DBGPRSR.SPD
+ * whenever a WFI is issued, even if the core is not powered down, in
+ * violation of the architecture. When DBGPRSR.SPD is set, accesses to
+ * breakpoint and watchpoint registers are treated as undefined, so
+ * this results in boot time and runtime failures when these are
+ * accessed and we unexpectedly take a trap.
+ *
+ * It's not clear if/how this can be worked around, so we blacklist
+ * Scorpion CPUs to avoid these issues.
+ */
+ if ((read_cpuid_id() & 0xff00fff0) == ARM_CPU_PART_SCORPION) {
+ pr_info("Scorpion CPU detected. Hardware breakpoints and watchpoints disabled\n");
+ return 0;
+ }
+
/* Determine how many BRPs/WRPs are available. */
core_num_brps = get_num_brps();
core_num_wrps = get_num_wrps();
\
 
 \ /
  Last update: 2017-03-10 12:57    [W:0.789 / U:4.384 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site