lkml.org 
[lkml]   [2017]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH linux v4 1/2] Documentation: dt-bindings: Document bindings for ASPEED AST2400/AST2500 PWM and Fan tach controller device driver
Date
This binding provides interface for adding values related to ASPEED
AST2400/2500 PWM and Fan tach controller support.
The PWM controller can support upto 8 PWM output ports.
The Fan tach controller can support upto 16 tachometer inputs.

Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com>
---
v4:
- Used 'reg'

v3:
- Made the structure more common

v2:
- Removed '_' in node and property names
- Gave some explanation for the properties used

.../devicetree/bindings/hwmon/aspeed-pwm-tacho.txt | 86 ++++++++++++++++++++++
1 file changed, 86 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt

diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
new file mode 100644
index 000000000000..0dfd2841ace3
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
@@ -0,0 +1,86 @@
+ASPEED AST2400/AST2500 PWM and Fan Tacho controller device driver
+
+The ASPEED PWM controller can support upto 8 PWM outputs. The ASPEED Fan Tacho
+controller can support upto 16 Fan tachometer inputs.
+
+There can be upto 8 fans supported. Each fan can have one PWM output and
+one/two Fan tach inputs.
+
+Required properties for pwm-tacho node:
+- #address-cells : should be 1.
+
+- #size-cells : should be 1.
+
+- reg : address and length of the register set for the device.
+
+- pinctrl-names : a pinctrl state named "default" must be defined.
+
+- pinctrl-0 : phandle referencing pin configuration of the PWM ports.
+
+- compatible : should be "aspeed,aspeed2400-pwm-tacho" for AST2400 or
+ "aspeed,aspeed2500-pwm-tacho" for AST2500.
+
+- clocks : a fixed clock providing input clock frequency(PWM
+ and Fan Tach clock)
+
+fan subnode format:
+===================
+Under fan subnode there can upto 8 child nodes, with each child node
+representing a fan. If there are 8 fans each fan can have one PWM port and
+one/two Fan tach inputs.
+
+Required properties for each child node:
+- reg : should specify PWM source port.
+ integer value in the range 0 to 7 with 0 indicating PWM port A and
+ 7 indicating PWM port H.
+
+ Atleast one tach subnode is required. Each tach subnode represents a fan
+ tach input.
+ tach subnode format:
+ --------------------
+ Required properties for each child node:
+ - fan-ctrl-gpios : should specify the tachometer input GPIO pin on the hardware.
+ Fan Tachometer function can only work when GPIO is in
+ ”input mode”.
+
+ - fan-tach-ch : should specify the Fan tach input channel.
+ integer value in the range 0 through 15, with 0 indicating
+ Fan tach channel 0 and 15 indicating Fan tach channel 15.
+
+Examples:
+
+pwmtachofixedclk: fixedclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+}
+
+pwmtacho: pwmtachocontroller@1e786000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x1E786000 0x1000>;
+ compatible = "aspeed,aspeed2500-pwm-tacho";
+ clocks = <&pwmtachofixedclk>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+ fan0 {
+ reg = /bits/ 8 <0x00>;
+ tach0 {
+ fan-ctrl-gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_HIGH>;
+ fan-tach-ch = /bits/ 8 <0x00>;
+ };
+ };
+
+ fan1 {
+ reg = /bits/ 8 <0x01>;
+ tach0 {
+ fan-ctrl-gpios = <&gpio ASPEED_GPIO(O, 1) GPIO_ACTIVE_HIGH>;
+ fan-tach-ch = /bits/ 8 <0x01>;
+ };
+ tach1 {
+ fan-ctrl-gpios = <&gpio ASPEED_GPIO(O, 2) GPIO_ACTIVE_HIGH>;
+ fan-tach-ch = /bits/ 8 <0x02>;
+ };
+ };
+};
--
2.12.0.246.ga2ecc84866-goog
\
 
 \ /
  Last update: 2017-03-11 02:54    [W:0.046 / U:0.372 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site