lkml.org 
[lkml]   [2017]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] drm: dw_hdmi: Gate audio sampler clock from the enablement functions
On Fri, Mar 10, 2017 at 10:35:09AM +0100, Romain Perier wrote:
> Currently, the audio sampler clock is enabled from dw_hdmi_setup() at
> step E. and is kept enabled for later use. This clock should be enabled
> and disabled along with the actual audio stream and not always on (that
> is bad for PM). Futhermore, this might cause sound glitches with some
> HDMI devices, as the CTS+N is forced to zero when the stream is disabled
> while the audio clock is still running.
>
> This commit adds a parameter to hdmi_audio_enable_clk() that controls
> when the audio sample clock must be enabled or disabled. Then, it moves
> the call to this function into dw_hdmi_audio_enable() and
> dw_hdmi_audio_disable().

How does this interact with the workaround given in my commit introducing
these functions? (Commit b90120a96608).

Setting N=0 is a work-around for iMX6, and we need the audio FIFO to be
loaded with data prior to setting N non-zero. If disabling the audio
clock prevents the audio FIFO being loaded, your patch will break iMX6.

--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

\
 
 \ /
  Last update: 2017-03-10 10:48    [W:0.120 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site