lkml.org 
[lkml]   [2017]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/3] Documentation: devicetree: Add PHY no lane swap binding
Date
Add the documentation to avoid PHY lane swapping. This is a boolean
entry to notify the phy device drivers that the TX/RX lanes NO need
to be swapped.
The use case for this binding mostly happens after wrong HW
configuration of PHY IC during bootstrap.

Signed-off-by: Lukasz Majewski <lukma@denx.de>

---
Changes for v3:
- Change binding to property
---
Documentation/devicetree/bindings/net/phy.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index fb5056b..b558576 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -39,6 +39,10 @@ Optional Properties:
- enet-phy-lane-swap: If set, indicates the PHY will swap the TX/RX lanes to
compensate for the board being designed with the lanes swapped.

+- enet-phy-lane-no-swap: If set, indicates that PHY will disable swap of the
+ TX/RX lanes. This property allows the PHY to work correcly after e.g. wrong
+ bootstrap configuration caused by issues in PCB layout design.
+
- eee-broken-100tx:
- eee-broken-1000t:
- eee-broken-10gt:
--
2.1.4
\
 
 \ /
  Last update: 2017-02-07 06:22    [W:0.050 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site