lkml.org 
[lkml]   [2017]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/3] net: phy: dp83867: Add lane swapping support in the DP83867 TI's PHY driver
On Tue, Feb 07, 2017 at 06:20:23AM +0100, Lukasz Majewski wrote:
> This patch adds support for enabling or disabling the lane swapping (called
> "port mirroring" in PHY's CFG4 register) feature of the DP83867 TI's PHY
> device.
>
> One use case is when bootstrap configuration enables this feature (because
> of e.g. LED_0 wrong wiring) so then one needs to disable it in software
> (at u-boot/Linux).
>
> Signed-off-by: Lukasz Majewski <lukma@denx.de>

So it is documented, in a separate patch, which is out of order.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Andrew


> ---
> Changes for v3:
> - Add "line swapping" to the patch description
> - Add DP83867_PORT_MIRROING_KEEP enum for better code readability
>
> Changes for v2:
> - use "net-phy-lane-swap" and "net-phy-lane-no-swap" generic PHY properties.
> instead of TI specific one
> ---
> drivers/net/phy/dp83867.c | 38 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 38 insertions(+)
>
> diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
> index ca1b462..be6fa24 100644
> --- a/drivers/net/phy/dp83867.c
> +++ b/drivers/net/phy/dp83867.c
> @@ -32,6 +32,7 @@
> #define DP83867_CFG3 0x1e
>
> /* Extended Registers */
> +#define DP83867_CFG4 0x0031
> #define DP83867_RGMIICTL 0x0032
> #define DP83867_RGMIIDCTL 0x0086
> #define DP83867_IO_MUX_CFG 0x0170
> @@ -70,11 +71,21 @@
> #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0
> #define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN 0x1f
>
> +/* CFG4 bits */
> +#define DP83867_CFG4_PORT_MIRROR_EN BIT(0)
> +
> +enum {
> + DP83867_PORT_MIRROING_KEEP,
> + DP83867_PORT_MIRROING_EN,
> + DP83867_PORT_MIRROING_DIS,
> +};
> +
> struct dp83867_private {
> int rx_id_delay;
> int tx_id_delay;
> int fifo_depth;
> int io_impedance;
> + int port_mirroring;
> };
>
> static int dp83867_ack_interrupt(struct phy_device *phydev)
> @@ -111,6 +122,24 @@ static int dp83867_config_intr(struct phy_device *phydev)
> return phy_write(phydev, MII_DP83867_MICR, micr_status);
> }
>
> +static int dp83867_config_port_mirroring(struct phy_device *phydev)
> +{
> + struct dp83867_private *dp83867 =
> + (struct dp83867_private *)phydev->priv;
> + u16 val;
> +
> + val = phy_read_mmd_indirect(phydev, DP83867_CFG4, DP83867_DEVADDR);
> +
> + if (dp83867->port_mirroring == DP83867_PORT_MIRROING_EN)
> + val |= DP83867_CFG4_PORT_MIRROR_EN;
> + else
> + val &= ~DP83867_CFG4_PORT_MIRROR_EN;
> +
> + phy_write_mmd_indirect(phydev, DP83867_CFG4, DP83867_DEVADDR, val);
> +
> + return 0;
> +}
> +
> #ifdef CONFIG_OF_MDIO
> static int dp83867_of_init(struct phy_device *phydev)
> {
> @@ -144,6 +173,12 @@ static int dp83867_of_init(struct phy_device *phydev)
> phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID))
> return ret;
>
> + if (of_property_read_bool(of_node, "enet-phy-lane-swap"))
> + dp83867->port_mirroring = DP83867_PORT_MIRROING_EN;
> +
> + if (of_property_read_bool(of_node, "enet-phy-lane-no-swap"))
> + dp83867->port_mirroring = DP83867_PORT_MIRROING_DIS;
> +
> return of_property_read_u32(of_node, "ti,fifo-depth",
> &dp83867->fifo_depth);
> }
> @@ -228,6 +263,9 @@ static int dp83867_config_init(struct phy_device *phydev)
> phy_write(phydev, DP83867_CFG3, val);
> }
>
> + if (dp83867->port_mirroring != DP83867_PORT_MIRROING_KEEP)
> + dp83867_config_port_mirroring(phydev);
> +
> return 0;
> }
>
> --
> 2.1.4
>

\
 
 \ /
  Last update: 2017-02-07 14:04    [W:0.049 / U:0.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site