lkml.org 
[lkml]   [2017]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/3] cpufreq: bmips-cpufreq: CPUfreq driver for Broadcom's BMIPS SoCs
On 2 February 2017 at 20:28, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> You must be a cpufreq driver expert by now. What's the count? Is this the 3rd
> one you have written ? :)

Indeed. This is #3. We should be done now, though. We have ARM, legacy
ARM and BMIPS covered. :-)

> On 01-02-17, 17:06, Markus Mayer wrote:
>> diff --git a/drivers/cpufreq/bmips-cpufreq.c b/drivers/cpufreq/bmips-cpufreq.c
>> +static struct cpufreq_frequency_table *
>> +bmips_cpufreq_get_freq_table(const struct cpufreq_policy *policy)
>
> Maybe call it bmips_cpufreq_create_freq_table() as that's what you are doing.
> But its all up to you only.

I was about to change the name, but then realized that the other two
drivers use *get_freq_table(), too. So, I'd prefer to keep the name as
is, so we don't get naming oddities between various Broadcom cpufreq
drivers.

>> +{
>> + struct cpufreq_frequency_table *table;
>> + struct cpufreq_compat *cc;
>> + unsigned long cpu_freq;
>> + int i;
>> +
>> + cc = policy->driver_data;
>> + cpu_freq = htp_freq_to_cpu_freq(cc->clk_mult);
>> +
>> + table = kzalloc((cc->max_freqs + 1) * sizeof(*table), GFP_KERNEL);
>
> Maybe kmalloc as you are updating all the entries.

Done.

>> + if (!table)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + for (i = 0; i < cc->max_freqs; i++) {
>> + table[i].frequency = cpu_freq / (1 << i);
>> + table[i].driver_data = i;
>> + }
>> + table[i].frequency = CPUFREQ_TABLE_END;
>> +
>> + return table;
>> +}
>> +
>> +static unsigned int bmips_cpufreq_get(unsigned int cpu)
>> +{
>> + struct cpufreq_policy *policy;
>> + struct cpufreq_compat *cc;
>> + unsigned long freq, cpu_freq;
>> + unsigned int div;
>> + uint32_t mode;
>> +
>> + policy = cpufreq_cpu_get(cpu);
>
> You need to do a corresponding cpufreq_cpu_put().

Actually, I don't need the policy at all anymore. I converted to a
global variable (as per suggestion below), which means no more policy
in this function. So, rather than adding cpufreq_cpu_put(), I removed
cpufreq_cpu_get().

>> + cc = policy->driver_data;
>> +
>> + switch (cc->bmips_type) {
>> + case BMIPS5200:
>> + case BMIPS5000:
>> + mode = read_c0_brcm_mode();
>> + div = ((mode >> BMIPS5_CLK_DIV_SHIFT) & BMIPS5_CLK_DIV_MASK);
>> + break;
>> + default:
>> + div = 0;
>> + }
>> +
>> + cpu_freq = htp_freq_to_cpu_freq(cc->clk_mult);
>> + freq = cpu_freq / (1 << div);
>> +
>> + return freq;
>> +}
>> +
>> +static int bmips_cpufreq_target_index(struct cpufreq_policy *policy,
>> + unsigned int index)
>> +{
>> + struct cpufreq_compat *cc;
>> + unsigned int div;
>> +
>> + cc = policy->driver_data;
>> + div = policy->freq_table[index].driver_data;
>> +
>> + switch (cc->bmips_type) {
>> + case BMIPS5200:
>> + case BMIPS5000:
>> + change_c0_brcm_mode(BMIPS5_CLK_DIV_MASK << BMIPS5_CLK_DIV_SHIFT,
>> + (1 << BMIPS5_CLK_DIV_SET_SHIFT) |
>> + (div << BMIPS5_CLK_DIV_SHIFT));
>> + break;
>> + default:
>> + return -ENOTSUPP;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int bmips_cpufreq_exit(struct cpufreq_policy *policy)
>> +{
>> + kfree(policy->freq_table);
>> + policy->freq_table = NULL;
>
> No need to set it to NULL.

Removed.

>> +
>> + return 0;
>> +}
>> +
>> +static int bmips_cpufreq_init(struct cpufreq_policy *policy)
>> +{
>> + struct cpufreq_frequency_table *freq_table;
>> + int ret;
>> +
>> + /* Store the compatibility data with the policy. */
>> + policy->driver_data = cpufreq_get_driver_data();
>
> Hmm, I wouldn't mind keeping a global variable for this. This driver will be
> probed only once and so we can simplify the code a bit. Up to you.

Done. Got rid of 10 lines of code overall.

>> +
>> + freq_table = bmips_cpufreq_get_freq_table(policy);
>> + if (IS_ERR(freq_table)) {
>> + ret = PTR_ERR(freq_table);
>> + pr_err("%s: couldn't determine frequency table (%d).\n",
>> + BMIPS_CPUFREQ_NAME, ret);
>> + return ret;
>> + }
>> +
>> + ret = cpufreq_generic_init(policy, freq_table, TRANSITION_LATENCY);
>> + if (ret)
>> + bmips_cpufreq_exit(policy);
>> + else
>> + pr_info("%s: registered\n", BMIPS_CPUFREQ_NAME);
>> +
>> + return ret;
>> +}
>> +
>> +static struct cpufreq_driver bmips_cpufreq_driver = {
>> + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
>> + .verify = cpufreq_generic_frequency_table_verify,
>> + .target_index = bmips_cpufreq_target_index,
>> + .get = bmips_cpufreq_get,
>> + .init = bmips_cpufreq_init,
>> + .exit = bmips_cpufreq_exit,
>> + .attr = cpufreq_generic_attr,
>> + .name = BMIPS_CPUFREQ_PREFIX,
>> +};
>> +
>> +static int __init bmips_cpufreq_probe(void)
>> +{
>> + struct cpufreq_compat *cc;
>> + struct device_node *np;
>> +
>> + for (cc = bmips_cpufreq_compat; cc->compatible; cc++) {
>> + np = of_find_compatible_node(NULL, "cpu", cc->compatible);
>> + if (np) {
>> + of_node_put(np);
>> + bmips_cpufreq_driver.driver_data = cc;
>> + break;
>> + }
>> + }
>> +
>> + /* We hit the guard element of the array. No compatible CPU found. */
>> + if (!cc->compatible)
>> + return -ENODEV;
>> +
>> + return cpufreq_register_driver(&bmips_cpufreq_driver);
>> +}
>> +device_initcall(bmips_cpufreq_probe);
>> +
>> +MODULE_AUTHOR("Markus Mayer <mmayer@broadcom.com>");
>> +MODULE_DESCRIPTION("CPUfreq driver for Broadcom BMIPS SoCs");
>> +MODULE_LICENSE("GPL");
>> --
>> 2.7.4
>
> --
> viresh

\
 
 \ /
  Last update: 2017-02-06 22:23    [W:0.462 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site