lkml.org 
[lkml]   [2017]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 3/3] PCI: imx6: Add code to support i.MX7D
On Mon, Feb 6, 2017 at 7:33 AM, Lucas Stach <l.stach@pengutronix.de> wrote:
> Am Montag, den 06.02.2017, 07:17 -0800 schrieb Andrey Smirnov:
>> Add various bits of code needed to support i.MX7D variant of the IP.
>>
>> Cc: yurovsky@gmail.com
>> Cc: Lucas Stach <l.stach@pengutronix.de>
>> Cc: Bjorn Helgaas <bhelgaas@google.com>
>> Cc: Fabio Estevam <fabio.estevam@nxp.com>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: Lee Jones <lee.jones@linaro.org>
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: devicetree@vger.kernel.org
>> Cc: linux-kernel@vger.kernel.org
>> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
>
> Two small comments inline, otherwise looks real good now.
>
>> ---
>> .../devicetree/bindings/pci/fsl,imx6q-pcie.txt | 6 +-
>> drivers/pci/host/pci-imx6.c | 121 ++++++++++++++++-----
>> include/linux/mfd/syscon/imx7-iomuxc-gpr.h | 4 +
>> 3 files changed, 105 insertions(+), 26 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
>> index 83aeb1f..9f57759 100644
>> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
>> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
>> @@ -4,7 +4,11 @@ This PCIe host controller is based on the Synopsis Designware PCIe IP
>> and thus inherits all the common properties defined in designware-pcie.txt.
>>
>> Required properties:
>> -- compatible: "fsl,imx6q-pcie", "fsl,imx6sx-pcie", "fsl,imx6qp-pcie"
>> +- compatible:
>> + - "fsl,imx6q-pcie"
>> + - "fsl,imx6sx-pcie",
>> + - "fsl,imx6qp-pcie"
>> + - "fsl,imx7d-pcie"
>> - reg: base address and length of the PCIe controller
>> - interrupts: A list of interrupt outputs of the controller. Must contain an
>> entry for each entry in the interrupt-names property.
>
> This misses an "Additional required properties for imx7d-pcie" section
> listing the required reset handles.

Darn! Forgot to update this part. Will fix in v4.

>
>> diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
>> index 3ef8093..34a21c9 100644
>> --- a/drivers/pci/host/pci-imx6.c
>> +++ b/drivers/pci/host/pci-imx6.c
>
> [...]
>
>> static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
>> {
>> struct pcie_port *pp = &imx6_pcie->pp;
>> @@ -381,6 +416,11 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
>> }
>>
>> switch (imx6_pcie->variant) {
>> + case IMX7D:
>> + reset_control_assert(imx6_pcie->apps_reset);
>
> Can this reset assertion be moved into imx6_pcie_assert_core_reset()?
> This may change the programming order slightly from the downstream
> driver, but I guess that won't hurt if this is the equivalent of the
> LTSSM enable signal.

I don't see why it wouldn't be possible to move it. I'll give it a try
on a real HW and update v4 accordingly.

Thanks,
Andrey Smirnov

\
 
 \ /
  Last update: 2017-02-06 20:19    [W:0.051 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site