lkml.org 
[lkml]   [2017]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] drm/panel: Add driver for sitronix ST7789V panel
On Fri, Feb 03, 2017 at 10:59:06AM +0100, Maxime Ripard wrote:
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
> drivers/gpu/drm/panel/Kconfig | 4 +-
> drivers/gpu/drm/panel/Makefile | 1 +-
> drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 435 ++++++++++++++++++-
> 3 files changed, 440 insertions(+), 0 deletions(-)
> create mode 100644 drivers/gpu/drm/panel/panel-sitronix-st7789v.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 62aba976e744..d07b996a07b8 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -81,4 +81,8 @@ config DRM_PANEL_SHARP_LS043T1LE01
> Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
> (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
>
> +config DRM_PANEL_SITRONIX_ST7789V
> + tristate "Sitronx ST7789V panel"

"Sitronix"

> + depends on OF && SPI
> +

Maybe be more verbose here about what kind of panel it is, and what
resolution it provides.

> endmenu
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index a5c7ec0236e0..41b245d39984 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -6,3 +6,4 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
> obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
> obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
> +obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
> diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> new file mode 100644
> index 000000000000..aab817b55aa6
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
> @@ -0,0 +1,435 @@
> +/*
> + * Copyright (C) 2017 Free Electrons
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License version
> + * 2 as published by the Free Software Foundation.
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_panel.h>
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/spi/spi.h>

I prefer linux/* headers to go first.

> +
> +#define ST7789V_SLPIN_CMD 0x10
> +
> +#define ST7789V_SLPOUT_CMD 0x11
> +
> +#define ST7789V_INVON_CMD 0x21
> +
> +#define ST7789V_DISPOFF_CMD 0x28
> +
> +#define ST7789V_DISPON_CMD 0x29
> +
> +#define ST7789V_MADCTL_CMD 0x36
> +
> +#define ST7789V_COLMOD_CMD 0x3a
> +#define ST7789V_COLMOD_RGB_FMT_18BITS (6 << 4)
> +#define ST7789V_COLMOD_CTRL_FMT_18BITS (6 << 0)

MIPI_DCS_PIXEL_FMT_18BIT?

[...]
> +struct st7789v {
> + struct drm_panel panel;
> + struct spi_device *spi;
> + struct gpio_desc *reset;
> + struct backlight_device *backlight;
> +};
> +
> +enum st7789v_prefix {
> + ST7789V_COMMAND = 0,
> + ST7789V_DATA = 1,
> +};
> +
> +static inline struct st7789v *panel_to_st7789v(struct drm_panel *panel)
> +{
> + return container_of(panel, struct st7789v, panel);
> +}
> +
> +static int st7789v_spi_write(struct st7789v *ctx, u8 prefix, u8 data)

Why aren't you using the proper type here for prefix?

> +{
> + struct spi_transfer xfer = { };
> + struct spi_message msg;
> + u16 txbuf = ((prefix & 1) << 8) | data;
> +
> + spi_message_init(&msg);
> +
> + xfer.tx_buf = &txbuf;
> + xfer.bits_per_word = 9;
> + xfer.len = sizeof(txbuf);
> +
> + spi_message_add_tail(&xfer, &msg);
> + return spi_sync(ctx->spi, &msg);
> +}
> +
> +static int st7789v_write_command(struct st7789v *ctx, u8 cmd)
> +{
> + return st7789v_spi_write(ctx, ST7789V_COMMAND, cmd);
> +}
> +
> +static int st7789v_write_data(struct st7789v *ctx, u8 cmd)
> +{
> + return st7789v_spi_write(ctx, ST7789V_DATA, cmd);
> +}
> +
> +static int st7789v_write_command_data(struct st7789v *ctx, u8 cmd,
> + unsigned long n_data, ...)
> +{
> + va_list ap;
> + int i;
> +
> + st7789v_write_command(ctx, cmd);
> +
> + va_start(ap, n_data);
> + for (i = 0; i < n_data; i++)
> + st7789v_write_data(ctx, va_arg(ap, int));
> + va_end(ap);
> +
> + return 0;
> +}

Please propagate error codes from st7789v_write_{command,data}(). And
you should abort early on errors.

> +#define NUMARGS(...) (sizeof((int[]){__VA_ARGS__}) / sizeof(int))
> +#define st7789v_send(ctx, cmd, ...) \
> + st7789v_write_command_data(ctx, cmd, NUMARGS(__VA_ARGS__), \
> + ##__VA_ARGS__)

How is this going to work if any of the arguments happens to not be an
int? What if you have something like this:

u8 value = 0x2;

st7789v_write_command_data(ctx, cmd, 0x1, value, 0x3);

? Wouldn't that invalidly read "value" as int and wrongly increment the
ap by three bytes too many?

> +static int st7789v_prepare(struct drm_panel *panel)
> +{
> + struct st7789v *ctx = panel_to_st7789v(panel);
> +
> + gpiod_set_value(ctx->reset, 1);
> + msleep(30);
> + gpiod_set_value(ctx->reset, 0);
> + msleep(120);
> +
> + st7789v_send(ctx, ST7789V_SLPOUT_CMD);
> +
> + /* We need to wait 120ms after a sleep out command */
> + msleep(120);
> +
> + st7789v_send(ctx, ST7789V_MADCTL_CMD, 0);
> +
> + st7789v_send(ctx, ST7789V_COLMOD_CMD,
> + ST7789V_COLMOD_CTRL_FMT_18BITS |
> + ST7789V_COLMOD_RGB_FMT_18BITS);
> +
> + st7789v_send(ctx, ST7789V_PORCTRL_CMD,
> + 0xc, /* Backporch, normal mode*/
> + 0xc, /* Frontporch, normal mode */
> + 0, /* Disable separate porch control */
> + ST7789V_PORCTRL_IDLE_BP(3) |
> + ST7789V_PORCTRL_IDLE_FP(3),
> + ST7789V_PORCTRL_PARTIAL_BP(3) |
> + ST7789V_PORCTRL_PARTIAL_FP(3));
> +
> + st7789v_send(ctx, ST7789V_GCTRL_CMD,
> + ST7789V_GCTRL_VGLS(5) | ST7789V_GCTRL_VGHS(3));
> +
> + st7789v_send(ctx, ST7789V_VCOMS_CMD, 0x2b);
> +
> + st7789v_send(ctx, ST7789V_LCMCTRL_CMD, ST7789V_LCMCTRL_XMH |
> + ST7789V_LCMCTRL_XMX | ST7789V_LCMCTRL_XBGR);
> +
> + st7789v_send(ctx, ST7789V_VDVVRHEN_CMD, ST7789V_VDVVRHEN_CMDEN);
> +
> + st7789v_send(ctx, ST7789V_VRHS_CMD, 0xf);
> +
> + st7789v_send(ctx, ST7789V_VDVS_CMD, 0x20);
> +
> + st7789v_send(ctx, ST7789V_FRCTRL2_CMD, 0xf);
> +
> + st7789v_send(ctx, ST7789V_PWCTRL1_CMD, ST7789V_PWCTRL1_MAGIC,
> + ST7789V_PWCTRL1_AVDD(2) | ST7789V_PWCTRL1_AVCL(2) |
> + ST7789V_PWCTRL1_VDS(1));
> +
> + st7789v_send(ctx, ST7789V_PVGAMCTRL_CMD,
> + ST7789V_PVGAMCTRL_VP63(0xd),
> + ST7789V_PVGAMCTRL_VP1(0xca),
> + ST7789V_PVGAMCTRL_VP2(0xe),
> + ST7789V_PVGAMCTRL_VP4(8),
> + ST7789V_PVGAMCTRL_VP6(9),
> + ST7789V_PVGAMCTRL_VP13(7),
> + ST7789V_PVGAMCTRL_VP20(0x2d),
> + ST7789V_PVGAMCTRL_VP27(0xb) | ST7789V_PVGAMCTRL_VP36(3),
> + ST7789V_PVGAMCTRL_VP43(0x3d),
> + ST7789V_PVGAMCTRL_JP1(3) | ST7789V_PVGAMCTRL_VP50(4),
> + ST7789V_PVGAMCTRL_VP57(0xa),
> + ST7789V_PVGAMCTRL_VP59(0xa),
> + ST7789V_PVGAMCTRL_VP61(0x1b),
> + ST7789V_PVGAMCTRL_VP62(0x28));
> +
> + st7789v_send(ctx, ST7789V_NVGAMCTRL_CMD,
> + ST7789V_NVGAMCTRL_VN63(0xd),
> + ST7789V_NVGAMCTRL_VN1(0xca),
> + ST7789V_NVGAMCTRL_VN2(0xf),
> + ST7789V_NVGAMCTRL_VN4(8),
> + ST7789V_NVGAMCTRL_VN6(8),
> + ST7789V_NVGAMCTRL_VN13(7),
> + ST7789V_NVGAMCTRL_VN20(0x2e),
> + ST7789V_NVGAMCTRL_VN27(0xc) | ST7789V_NVGAMCTRL_VN36(5),
> + ST7789V_NVGAMCTRL_VN43(0x40),
> + ST7789V_NVGAMCTRL_JN1(3) | ST7789V_NVGAMCTRL_VN50(4),
> + ST7789V_NVGAMCTRL_VN57(9),
> + ST7789V_NVGAMCTRL_VN59(0xb),
> + ST7789V_NVGAMCTRL_VN61(0x1b),
> + ST7789V_NVGAMCTRL_VN62(0x28));
> +
> + st7789v_send(ctx, ST7789V_INVON_CMD);
> +
> + st7789v_send(ctx, ST7789V_RAMCTRL_CMD,
> + ST7789V_RAMCTRL_DM_RGB | ST7789V_RAMCTRL_RM_RGB,
> + ST7789V_RAMCTRL_EPF(3) | ST7789V_RAMCTRL_MAGIC);
> +
> + st7789v_send(ctx, ST7789V_RGBCTRL_CMD,
> + ST7789V_RGBCTRL_WO | ST7789V_RGBCTRL_RCM(2) |
> + ST7789V_RGBCTRL_VSYNC_HIGH | ST7789V_RGBCTRL_HSYNC_HIGH |
> + ST7789V_RGBCTRL_PCLK_HIGH,
> + ST7789V_RGBCTRL_VBP(8), ST7789V_RGBCTRL_HBP(20));
> +
> + return 0;
> +}

Please check for errors in all of the above.

> +static int st7789v_probe(struct spi_device *spi)
> +{
> + struct device_node *backlight;
> + struct st7789v *ctx;
> + int ret;
> +
> + ctx = devm_kzalloc(&spi->dev, sizeof(*ctx), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + spi_set_drvdata(spi, ctx);
> + ctx->spi = spi;
> +
> + ctx->panel.dev = &spi->dev;
> + ctx->panel.funcs = &st7789v_drm_funcs;
> +
> + ctx->reset = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->reset)) {
> + dev_err(&spi->dev, "Couldn't get our reset line\n");
> + return PTR_ERR(ctx->reset);
> + }
> +
> + backlight = of_parse_phandle(spi->dev.of_node, "backlight", 0);
> + if (backlight) {
> + ctx->backlight = of_find_backlight_by_node(backlight);
> + of_node_put(backlight);
> +
> + if (!ctx->backlight)
> + return -EPROBE_DEFER;
> + }

This could make use of one of the helpers that Noralf had sent earlier
for TinyDRM. That is, if it weren't specific to TinyDRM.

Thierry
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-02-06 14:27    [W:0.120 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site