lkml.org 
[lkml]   [2017]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 5/5] thermal: cpu_cooling: Check OPP for errors
Date
It is possible for dev_pm_opp_find_freq_exact() to return errors. It was
all fine earlier as dev_pm_opp_get_voltage() had a check within it to
check for invalid OPPs, but dev_pm_opp_put() doesn't have any similar
checks and the callers need to make sure OPP is valid before calling
them.

Also update the later dev_warn_ratelimited() to not print the error
message as the OPP is guaranteed to be valid now.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/thermal/cpu_cooling.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index caaaeb3ac0f0..30d736289b87 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -431,13 +431,20 @@ static int get_static_power(struct cpufreq_cooling_device *cpufreq_device,

opp = dev_pm_opp_find_freq_exact(cpufreq_device->cpu_dev, freq_hz,
true);
+ if (IS_ERR(opp)) {
+ dev_warn_ratelimited(cpufreq_device->cpu_dev,
+ "Failed to find OPP for frequency %lu: %ld\n",
+ freq_hz, PTR_ERR(opp));
+ return -EINVAL;
+ }
+
voltage = dev_pm_opp_get_voltage(opp);
dev_pm_opp_put(opp);

if (voltage == 0) {
dev_err_ratelimited(cpufreq_device->cpu_dev,
- "Failed to get voltage for frequency %lu: %ld\n",
- freq_hz, IS_ERR(opp) ? PTR_ERR(opp) : 0);
+ "Failed to get voltage for frequency %lu\n",
+ freq_hz);
return -EINVAL;
}

--
2.7.1.410.g6faf27b
\
 
 \ /
  Last update: 2017-02-07 05:11    [W:0.106 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site