Messages in this thread Patch in this message | | | From | Baoyou Xie <> | Subject | [PATCH v4 1/3] dt: bindings: add documentation for zx2967 family i2c controller | Date | Mon, 6 Feb 2017 11:26:07 +0800 |
| |
This patch adds dt-binding documentation for zx2967 family i2c controller.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Rob Herring <robh@kernel.org> --- .../devicetree/bindings/i2c/i2c-zx2967.txt | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt new file mode 100644 index 0000000..a528374 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt @@ -0,0 +1,24 @@ +ZTE zx2967 I2C controller + +Required properties: + - compatible: must be "zte,zx296718-i2c" + - reg: physical address and length of the device registers + - interrupts: a single interrupt specifier + - clocks: clock for the device + - #address-cells: should be <1> + - #size-cells: should be <0> + - clock-frequency: the desired I2C bus clock frequency. + +Examples: + + i2c@112000 { + compatible = "zte,zx296718-i2c"; + reg = <0x00112000 0x1000>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24m>; + #address-cells = <1> + #size-cells = <0>; + clock-frequency = <1600000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_global_pin>; + }; -- 2.7.4
| |