lkml.org 
[lkml]   [2017]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.10 143/319] scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices
Date
From: Kashyap Desai <kashyap.desai@broadcom.com>

commit 1e793f6fc0db920400574211c48f9157a37e3945 upstream.

Commit 02b01e010afe ("megaraid_sas: return sync cache call with
success") modified the driver to successfully complete SYNCHRONIZE_CACHE
commands without passing them to the controller. Disk drive caches are
only explicitly managed by controller firmware when operating in RAID
mode. So this commit effectively disabled writeback cache flushing for
any drives used in JBOD mode, leading to data integrity failures.

[mkp: clarified patch description]

Fixes: 02b01e010afeeb49328d35650d70721d2ca3fd59
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
drivers/scsi/megaraid/megaraid_sas_base.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 6ced6a3..0626a16 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -1487,16 +1487,13 @@ megasas_queue_command_lck(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd
goto out_done;
}

- switch (scmd->cmnd[0]) {
- case SYNCHRONIZE_CACHE:
- /*
- * FW takes care of flush cache on its own
- * No need to send it down
- */
+ /*
+ * FW takes care of flush cache on its own for Virtual Disk.
+ * No need to send it down for VD. For JBOD send SYNCHRONIZE_CACHE to FW.
+ */
+ if ((scmd->cmnd[0] == SYNCHRONIZE_CACHE) && MEGASAS_IS_LOGICAL(scmd)) {
scmd->result = DID_OK << 16;
goto out_done;
- default:
- break;
}

if (instance->instancet->build_and_issue_cmd(instance, scmd)) {
--
2.8.0.rc2.1.gbe9624a
\
 
 \ /
  Last update: 2017-02-05 20:50    [W:1.276 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site