lkml.org 
[lkml]   [2017]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] Documentation: dt-bindings: Document bindings for Aspeed AST2400/AST2500 ADC
On Wed, Mar 1, 2017 at 6:44 AM, Rick Altherr <raltherr@google.com> wrote:
> Signed-off-by: Rick Altherr <raltherr@google.com>

Acked-by: Joel Stanley <joel@jms.id.au>

> ---
> .../devicetree/bindings/hwmon/aspeed_adc.txt | 48 ++++++++++++++++++++++
> 1 file changed, 48 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed_adc.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/aspeed_adc.txt b/Documentation/devicetree/bindings/hwmon/aspeed_adc.txt
> new file mode 100644
> index 000000000000..9e481668c4d3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/aspeed_adc.txt
> @@ -0,0 +1,48 @@
> +Aspeed AST2400/2500 ADC
> +
> +This device is a 10-bit converter for 16 voltage channels. All inputs are
> +single ended. Each channel can be individually enabled to allow for use of
> +alternate pin functions.
> +
> +1) adc node
> +
> + Required properties:
> + - compatible : Should be one of
> + "aspeed,ast2400-adc"
> + "aspeed,ast2500-adc"
> + - reg : memory window mapping address and length
> + - #address-cells : must be <1> corresponding to the channel child binding
> + - #size-cells : must be <0> corresponding to the channel child binding
> + - clocks : Input clock used to derive the sample clock. Expected to be the
> + SoC's APB clock.
> + - update-interval-ms : initial time between updates on a channel
> +
> + The node contains child nodes for each channel that the platform uses.
> +
> + Example adc node:
> + adc@1e6e9000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "aspeed,ast2400-adc";
> + reg = <0x1e6e9000 0xB0>;
> + clocks = <&clk_apb>;
> + update-interval-ms = <100>;
> +
> + [ child node definitions... ]
> + };
> +
> +2) channel nodes
> +
> + Optional properties:
> + - status: indicates the operational status of the device.
> + Value must be either "disabled" or "okay".
> + - label : string describing the monitored value
> +
> + Example channel node:
> + channel@1 {
> + status = "okay";
> + label = "3V3 rail";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_adc0_default>;
> + };
> --
> 2.11.0.483.g087da7b7c-goog
>

\
 
 \ /
  Last update: 2017-03-01 02:01    [W:2.371 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site