lkml.org 
[lkml]   [2017]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] PCI, pciehp: Reuse set_slot_off()
On Fri, Feb 24, 2017 at 9:17 AM, Raj, Ashok <ashok.raj@intel.com> wrote:
> On Thu, Feb 23, 2017 at 10:54:35PM -0800, Yinghai Lu wrote:
>> +++ linux-2.6/drivers/pci/hotplug/pciehp_ctrl.c
>> @@ -71,9 +71,6 @@ static void set_slot_off(struct controll
>> */
>> msleep(1000);
>> }
>> -
>> - pciehp_green_led_off(pslot);
>> - pciehp_set_attention_status(pslot, 1);
>
> Re using set_slot_off() in remove_board() make sense.. but i'm not sure
> why these are pulled out? It seems to be functionally complete
> when these are done in set_slot_off().

Just don't want to the led operation is wrapped too deep inside.

In board_added(), has led operation code directly for success path.

so put led operation code directly for error path make them more symmetrically.

>
>> }
>>
>> /**
>> @@ -126,6 +123,8 @@ static int board_added(struct slot *p_sl
>>
>> err_exit:
>> set_slot_off(ctrl, p_slot);
>> + pciehp_green_led_off(p_slot);
>> + pciehp_set_attention_status(p_slot, 1);
>> return retval;
>> }
>>
>> @@ -142,16 +141,7 @@ static int remove_board(struct slot *p_s
>> if (retval)
>> return retval;
>>
>> - if (POWER_CTRL(ctrl)) {
>> - pciehp_power_off_slot(p_slot);
>> -
>> - /*
>> - * After turning power off, we must wait for at least 1 second
>> - * before taking any action that relies on power having been
>> - * removed from the slot/adapter.
>> - */
>> - msleep(1000);
>> - }
>> + set_slot_off(ctrl, p_slot);
>>
>> /* turn off Green LED */
>> pciehp_green_led_off(p_slot);
> Don't we need the pciehp_set_attention_status() here?

that attention led could be on if previous power on is not done successfully

Thanks

Yinghai.

\
 
 \ /
  Last update: 2017-02-24 19:40    [W:0.033 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site