lkml.org 
[lkml]   [2017]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 18/19] hwmon: (tmp103) Add OF device ID table
Date
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

drivers/hwmon/tmp103.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/drivers/hwmon/tmp103.c b/drivers/hwmon/tmp103.c
index ad571ec795a3..d0bb28b0d4c3 100644
--- a/drivers/hwmon/tmp103.c
+++ b/drivers/hwmon/tmp103.c
@@ -183,9 +183,16 @@ static const struct i2c_device_id tmp103_id[] = {
};
MODULE_DEVICE_TABLE(i2c, tmp103_id);

+static const struct of_device_id tmp103_of_match[] = {
+ { .compatible = "ti,tmp103" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tmp103_of_match);
+
static struct i2c_driver tmp103_driver = {
.driver = {
.name = "tmp103",
+ .of_match_table = of_match_ptr(tmp103_of_match),
.pm = TMP103_DEV_PM_OPS,
},
.probe = tmp103_probe,
--
2.9.3
\
 
 \ /
  Last update: 2017-02-24 14:16    [W:0.076 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site