lkml.org 
[lkml]   [2017]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 2/9] doc: DT: venus: binding document for Qualcomm video driver
On Wed, Feb 22, 2017 at 3:25 AM, Stanimir Varbanov
<stanimir.varbanov@linaro.org> wrote:
> Hi Rob,
>
> On 02/22/2017 02:09 AM, Rob Herring wrote:
>> On Tue, Feb 07, 2017 at 03:10:17PM +0200, Stanimir Varbanov wrote:
>>> Add binding document for Venus video encoder/decoder driver
>>>
>>> Cc: Rob Herring <robh+dt@kernel.org>
>>> Cc: devicetree@vger.kernel.org
>>> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
>>> ---
>>> Changes since previous v5:
>>> * dropped rproc phandle (remoteproc is not used anymore)
>>> * added subnodes paragraph with descrition of three subnodes:
>>> - video-decoder and video-encoder - describes decoder (core0) and
>>> encoder (core1) power-domains and clocks (applicable for msm8996
>>> Venus core).
>>> - video-firmware - needed to get reserved memory region where the
>>> firmware is stored.
>>>
>>> .../devicetree/bindings/media/qcom,venus.txt | 112 +++++++++++++++++++++
>>> 1 file changed, 112 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/media/qcom,venus.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/media/qcom,venus.txt b/Documentation/devicetree/bindings/media/qcom,venus.txt
>>> new file mode 100644
>>> index 000000000000..4427af3ca5a5
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/media/qcom,venus.txt
>>> @@ -0,0 +1,112 @@
>>
>> [...]
>>
>>> +* Subnodes
>>> +The Venus node must contain three subnodes representing video-decoder,
>>> +video-encoder and video-firmware.
>>
>> [...]
>>
>>> +The video-firmware subnode should contain:
>>> +
>>> +- memory-region:
>>> + Usage: required
>>> + Value type: <phandle>
>>> + Definition: reference to the reserved-memory for the memory region
>>> +
>>> +* An Example
>>> + video-codec@1d00000 {
>>> + compatible = "qcom,msm8916-venus";
>>> + reg = <0x01d00000 0xff000>;
>>> + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
>>> + clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
>>> + <&gcc GCC_VENUS0_AHB_CLK>,
>>> + <&gcc GCC_VENUS0_AXI_CLK>;
>>> + clock-names = "core", "iface", "bus";
>>> + power-domains = <&gcc VENUS_GDSC>;
>>> + iommus = <&apps_iommu 5>;
>>> +
>>> + video-decoder {
>>> + compatible = "venus-decoder";
>>> + clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
>>> + clock-names = "core";
>>> + power-domains = <&mmcc VENUS_CORE0_GDSC>;
>>> + };
>>> +
>>> + video-encoder {
>>> + compatible = "venus-encoder";
>>> + clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
>>> + clock-names = "core";
>>> + power-domains = <&mmcc VENUS_CORE1_GDSC>;
>>> + };
>>> +
>>> + video-firmware {
>>> + memory-region = <&venus_mem>;
>>
>> Why does this need to be a sub node?
>
> Because firmware reserved memory region must have separate struct
> device, otherwise allocating video buffers (and map them through iommu)
> for video-codec will fail because dma_alloc_coherent trying to allocate
> from per-device coherent area.

Why can't the struct device be the video-codec device? Looking at the
code, I don't see why you need the 2nd struct device.

In any case, this is letting the driver design the binding which is
wrong. From a binding perspective, there's no reason to have this
node.

Rob

\
 
 \ /
  Last update: 2017-02-22 15:18    [W:0.142 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site