lkml.org 
[lkml]   [2017]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [kernel-hardening] [RFC 1/7] arch: add __ro_mostly_after_init section marker
From
Date

> On 19 Feb 2017, at 8:24 PM, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
>
> On 19 February 2017 at 10:04, Hoeun Ryu <hoeun.ryu@gmail.com> wrote:
>> After `__ro_after_init` marker is included in kernel, many kernel data
>> objects can be read-only-after-init. But there are many other places that
>> would be good to read-only-after-init but `__ro_after_init` can not be simply
>> applicable to them because they should be writable at some points, which are
>> during module_init/exit or dynamic de/registration for a specific subsystem.
>> `__ro_mostly_after_init` is basically the same to `__ro_after_init`. The
>> section is mapped as read-only after kernel init. The different thing is
>> this section is temporarily mapped as read-write during module_init/exit and
>> de/registration of a subsystem using set_ro_mostly_after_init_rw/ro pair.
>> Use `__ro_mostly_after_init` as a way to mark such memory instead when
>> `__ro_after_init` is not applicable because the memory should be writable
>> at the described points of time. They are read-only right after kernel init
>> and writable temporarily only during module_init/exit and dynamic
>> de/registration for a subsystem.
>>
>> Signed-off-by: Hoeun Ryu <hoeun.ryu@gmail.com>
>> ---
>> include/asm-generic/sections.h | 1 +
>> include/asm-generic/vmlinux.lds.h | 10 ++++++++++
>> include/linux/cache.h | 11 +++++++++++
>> 3 files changed, 22 insertions(+)
>>
>> diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h
>> index 4df64a1..16a6f21 100644
>> --- a/include/asm-generic/sections.h
>> +++ b/include/asm-generic/sections.h
>> @@ -34,6 +34,7 @@ extern char __bss_start[], __bss_stop[];
>> extern char __init_begin[], __init_end[];
>> extern char _sinittext[], _einittext[];
>> extern char __start_data_ro_after_init[], __end_data_ro_after_init[];
>> +extern char __start_data_ro_mostly_after_init[], __end_data_ro_mostly_after_init[];
>> extern char _end[];
>> extern char __per_cpu_load[], __per_cpu_start[], __per_cpu_end[];
>> extern char __kprobes_text_start[], __kprobes_text_end[];
>> diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
>> index 4e09b28..cc5f44e 100644
>> --- a/include/asm-generic/vmlinux.lds.h
>> +++ b/include/asm-generic/vmlinux.lds.h
>> @@ -265,6 +265,15 @@
>> __end_data_ro_after_init = .;
>> #endif
>>
>> +#ifndef RO_MOSTLY_AFTER_INIT_DATA
>> +#define RO_MOSTLY_AFTER_INIT_DATA(align) \
>> + . = ALIGN(align); \
>> + VMLINUX_SYMBOL(__start_data_ro_mostly_after_init) = .; \
>> + *(.data..ro_mostly_after_init) \
>> + . = ALIGN(align); \
>> + VMLINUX_SYMBOL(__end_data_ro_mostly_after_init) = .;
>> +#endif
>> +
>> /*
>> * Read only Data
>> */
>> @@ -275,6 +284,7 @@
>> *(.rodata) *(.rodata.*) \
>> RO_AFTER_INIT_DATA /* Read only after init */ \
>> KEEP(*(__vermagic)) /* Kernel version magic */ \
>> + RO_MOSTLY_AFTER_INIT_DATA(align) \
>
> You can't really drop this in the middle of a section like this. On
> arm64, we try very hard to use a minimal segment alignment of 64 KB
> (of 2 MB if DEBUG_ALIGN_RODATA=y), to ensure that the TLB footprint of
> the kernel image is minimized.
>
> So this should be a separate section in the arm64 linker script.
>

Could we achieve that using ALIGN(SECTION_SIZE) not ALIGN(PAGE_SIZE) for RO_DATA ?

>> . = ALIGN(8); \
>> VMLINUX_SYMBOL(__start___tracepoints_ptrs) = .; \
>> KEEP(*(__tracepoints_ptrs)) /* Tracepoints: pointer array */ \
>> diff --git a/include/linux/cache.h b/include/linux/cache.h
>> index 1be04f8..fd1cb9b 100644
>> --- a/include/linux/cache.h
>> +++ b/include/linux/cache.h
>> @@ -30,6 +30,17 @@
>> #define __ro_after_init __attribute__((__section__(".data..ro_after_init")))
>> #endif
>>
>> +/*
>> + * __ro_mostly_after_init is almost like __ro_after_init.
>> + * but __ro_mostly_after_init section is temporarily writable only during
>> + * module_init/exit or dynamic de/registeration of a subsystem using
>> + * set_ro_mostly_after_init_rw/ro pair.
>> + */
>> +#ifndef __ro_mostly_after_init
>> +#define __ro_mostly_after_init \
>> + __attribute__((__section__(".data..ro_mostly_after_init")))
>> +#endif
>> +
>> #ifndef ____cacheline_aligned
>> #define ____cacheline_aligned __attribute__((__aligned__(SMP_CACHE_BYTES)))
>> #endif
>> --
>> 2.7.4

\
 
 \ /
  Last update: 2017-02-21 07:31    [W:0.121 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site