lkml.org 
[lkml]   [2017]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] media: dt-bindings: vpif: extend the example with an output port
Date
This makes the example more or less correspond with the da850-evm
hardware setup.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
.../devicetree/bindings/media/ti,da850-vpif.txt | 36 +++++++++++++++++-----
1 file changed, 29 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
index 9c7510b..d6f93a1 100644
--- a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
+++ b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
@@ -16,7 +16,7 @@ Required properties:
Video Capture:

VPIF has a 16-bit parallel bus input, supporting 2 8-bit channels or a
-single 16-bit channel. It should contain at least one port child node
+single 16-bit channel. It should contain one or two port child nodes
with child 'endpoint' node. Please refer to the bindings defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.

@@ -28,19 +28,26 @@ I2C-connected TVP5147 decoder:
reg = <0x217000 0x1000>;
interrupts = <92>;

- port {
- vpif_ch0: endpoint@0 {
+ port@0 {
+ vpif_input_ch0: endpoint@0 {
reg = <0>;
bus-width = <8>;
- remote-endpoint = <&composite>;
+ remote-endpoint = <&composite_in>;
};

- vpif_ch1: endpoint@1 {
+ vpif_input_ch1: endpoint@1 {
reg = <1>;
bus-width = <8>;
data-shift = <8>;
};
};
+
+ port@1 {
+ vpif_output_ch0: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&composite_out>;
+ };
+ };
};

[ ... ]
@@ -53,13 +60,28 @@ I2C-connected TVP5147 decoder:
status = "okay";

port {
- composite: endpoint {
+ composite_in: endpoint {
hsync-active = <1>;
vsync-active = <1>;
pclk-sample = <0>;

/* VPIF channel 0 (lower 8-bits) */
- remote-endpoint = <&vpif_ch0>;
+ remote-endpoint = <&vpif_input_ch0>;
+ bus-width = <8>;
+ };
+ };
+ };
+
+ adv7343@2a {
+ compatible = "adi,adv7343";
+ reg = <0x2a>;
+
+ port {
+ composite_out: endpoint {
+ adi,dac-enable = <1 1 1>;
+ adi,sd-dac-enable = <1>;
+
+ remote-endpoint = <&vpif_output_ch0>;
bus-width = <8>;
};
};
--
2.9.3
\
 
 \ /
  Last update: 2017-02-16 19:05    [W:0.048 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site