lkml.org 
[lkml]   [2017]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 01/10] PCI: dwc: designware: Move the register defines to designware header file
Date
Wednesday, February 15, 2017 8:18 AM, Kishon Vijay Abraham I wrote:
>
> No functional change. Move the register defines and other macros from
> pcie-designware.c to pcie-designware.h. This is in preparation to
> split the pcie-designware.c file into designware core file and host
> specific file.
>
> While at that also fix a checkpatch warning.
>
> Reviewed-By: Joao Pinto <jpinto@synopsys.com>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Acked-by: Jingoo Han <jingoohan1@gmail.com>

Best regards,
Jingoo Han

> ---
> drivers/pci/dwc/pcie-designware.c | 70 --------------------------------
> ----
> drivers/pci/dwc/pcie-designware.h | 71
> +++++++++++++++++++++++++++++++++++++
> 2 files changed, 71 insertions(+), 70 deletions(-)
>
> diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-
> designware.c
> index af8f6e9..d0e4904 100644
> --- a/drivers/pci/dwc/pcie-designware.c
> +++ b/drivers/pci/dwc/pcie-designware.c
> @@ -25,76 +25,6 @@
>
> #include "pcie-designware.h"
>
> -/* Parameters for the waiting for link up routine */
> -#define LINK_WAIT_MAX_RETRIES 10
> -#define LINK_WAIT_USLEEP_MIN 90000
> -#define LINK_WAIT_USLEEP_MAX 100000
> -
> -/* Parameters for the waiting for iATU enabled routine */
> -#define LINK_WAIT_MAX_IATU_RETRIES 5
> -#define LINK_WAIT_IATU_MIN 9000
> -#define LINK_WAIT_IATU_MAX 10000
> -
> -/* Synopsys-specific PCIe configuration registers */
> -#define PCIE_PORT_LINK_CONTROL 0x710
> -#define PORT_LINK_MODE_MASK (0x3f << 16)
> -#define PORT_LINK_MODE_1_LANES (0x1 << 16)
> -#define PORT_LINK_MODE_2_LANES (0x3 << 16)
> -#define PORT_LINK_MODE_4_LANES (0x7 << 16)
> -#define PORT_LINK_MODE_8_LANES (0xf << 16)
> -
> -#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
> -#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17)
> -#define PORT_LOGIC_LINK_WIDTH_MASK (0x1f << 8)
> -#define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8)
> -#define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8)
> -#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8)
> -#define PORT_LOGIC_LINK_WIDTH_8_LANES (0x8 << 8)
> -
> -#define PCIE_MSI_ADDR_LO 0x820
> -#define PCIE_MSI_ADDR_HI 0x824
> -#define PCIE_MSI_INTR0_ENABLE 0x828
> -#define PCIE_MSI_INTR0_MASK 0x82C
> -#define PCIE_MSI_INTR0_STATUS 0x830
> -
> -#define PCIE_ATU_VIEWPORT 0x900
> -#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
> -#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
> -#define PCIE_ATU_REGION_INDEX2 (0x2 << 0)
> -#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
> -#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
> -#define PCIE_ATU_CR1 0x904
> -#define PCIE_ATU_TYPE_MEM (0x0 << 0)
> -#define PCIE_ATU_TYPE_IO (0x2 << 0)
> -#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
> -#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
> -#define PCIE_ATU_CR2 0x908
> -#define PCIE_ATU_ENABLE (0x1 << 31)
> -#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
> -#define PCIE_ATU_LOWER_BASE 0x90C
> -#define PCIE_ATU_UPPER_BASE 0x910
> -#define PCIE_ATU_LIMIT 0x914
> -#define PCIE_ATU_LOWER_TARGET 0x918
> -#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
> -#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
> -#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
> -#define PCIE_ATU_UPPER_TARGET 0x91C
> -
> -/*
> - * iATU Unroll-specific register definitions
> - * From 4.80 core version the address translation will be made by unroll
> - */
> -#define PCIE_ATU_UNR_REGION_CTRL1 0x00
> -#define PCIE_ATU_UNR_REGION_CTRL2 0x04
> -#define PCIE_ATU_UNR_LOWER_BASE 0x08
> -#define PCIE_ATU_UNR_UPPER_BASE 0x0C
> -#define PCIE_ATU_UNR_LIMIT 0x10
> -#define PCIE_ATU_UNR_LOWER_TARGET 0x14
> -#define PCIE_ATU_UNR_UPPER_TARGET 0x18
> -
> -/* Register address builder */
> -#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) ((0x3 << 20) | (region
> << 9))
> -
> /* PCIe Port Logic registers */
> #define PLR_OFFSET 0x700
> #define PCIE_PHY_DEBUG_R1 (PLR_OFFSET + 0x2c)
> diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-
> designware.h
> index a567ea2..b5226d4 100644
> --- a/drivers/pci/dwc/pcie-designware.h
> +++ b/drivers/pci/dwc/pcie-designware.h
> @@ -14,6 +14,77 @@
> #ifndef _PCIE_DESIGNWARE_H
> #define _PCIE_DESIGNWARE_H
>
> +/* Parameters for the waiting for link up routine */
> +#define LINK_WAIT_MAX_RETRIES 10
> +#define LINK_WAIT_USLEEP_MIN 90000
> +#define LINK_WAIT_USLEEP_MAX 100000
> +
> +/* Parameters for the waiting for iATU enabled routine */
> +#define LINK_WAIT_MAX_IATU_RETRIES 5
> +#define LINK_WAIT_IATU_MIN 9000
> +#define LINK_WAIT_IATU_MAX 10000
> +
> +/* Synopsys-specific PCIe configuration registers */
> +#define PCIE_PORT_LINK_CONTROL 0x710
> +#define PORT_LINK_MODE_MASK (0x3f << 16)
> +#define PORT_LINK_MODE_1_LANES (0x1 << 16)
> +#define PORT_LINK_MODE_2_LANES (0x3 << 16)
> +#define PORT_LINK_MODE_4_LANES (0x7 << 16)
> +#define PORT_LINK_MODE_8_LANES (0xf << 16)
> +
> +#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
> +#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17)
> +#define PORT_LOGIC_LINK_WIDTH_MASK (0x1f << 8)
> +#define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8)
> +#define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8)
> +#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8)
> +#define PORT_LOGIC_LINK_WIDTH_8_LANES (0x8 << 8)
> +
> +#define PCIE_MSI_ADDR_LO 0x820
> +#define PCIE_MSI_ADDR_HI 0x824
> +#define PCIE_MSI_INTR0_ENABLE 0x828
> +#define PCIE_MSI_INTR0_MASK 0x82C
> +#define PCIE_MSI_INTR0_STATUS 0x830
> +
> +#define PCIE_ATU_VIEWPORT 0x900
> +#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
> +#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
> +#define PCIE_ATU_REGION_INDEX2 (0x2 << 0)
> +#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
> +#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
> +#define PCIE_ATU_CR1 0x904
> +#define PCIE_ATU_TYPE_MEM (0x0 << 0)
> +#define PCIE_ATU_TYPE_IO (0x2 << 0)
> +#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
> +#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
> +#define PCIE_ATU_CR2 0x908
> +#define PCIE_ATU_ENABLE (0x1 << 31)
> +#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
> +#define PCIE_ATU_LOWER_BASE 0x90C
> +#define PCIE_ATU_UPPER_BASE 0x910
> +#define PCIE_ATU_LIMIT 0x914
> +#define PCIE_ATU_LOWER_TARGET 0x918
> +#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
> +#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
> +#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
> +#define PCIE_ATU_UPPER_TARGET 0x91C
> +
> +/*
> + * iATU Unroll-specific register definitions
> + * From 4.80 core version the address translation will be made by unroll
> + */
> +#define PCIE_ATU_UNR_REGION_CTRL1 0x00
> +#define PCIE_ATU_UNR_REGION_CTRL2 0x04
> +#define PCIE_ATU_UNR_LOWER_BASE 0x08
> +#define PCIE_ATU_UNR_UPPER_BASE 0x0C
> +#define PCIE_ATU_UNR_LIMIT 0x10
> +#define PCIE_ATU_UNR_LOWER_TARGET 0x14
> +#define PCIE_ATU_UNR_UPPER_TARGET 0x18
> +
> +/* Register address builder */
> +#define PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(region) \
> + ((0x3 << 20) | ((region) << 9))
> +
> /*
> * Maximum number of MSI IRQs can be 256 per controller. But keep
> * it 32 as of now. Probably we will never need more than 32. If needed,
> --
> 1.7.9.5


\
 
 \ /
  Last update: 2017-02-16 15:50    [W:1.164 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site