lkml.org 
[lkml]   [2017]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v3 1/8] net: stmmac: remove useless parenthesis
    Date
    This patch remove some useless parenthesis.

    Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
    Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
    Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
    ---
    drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 ++++----
    drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +-
    2 files changed, 5 insertions(+), 5 deletions(-)

    diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
    index 7251871..ee1dbf4 100644
    --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
    +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
    @@ -716,15 +716,15 @@ static void stmmac_adjust_link(struct net_device *dev)
    new_state = 1;
    switch (phydev->speed) {
    case 1000:
    - if (likely((priv->plat->has_gmac) ||
    - (priv->plat->has_gmac4)))
    + if (likely(priv->plat->has_gmac ||
    + priv->plat->has_gmac4))
    ctrl &= ~priv->hw->link.port;
    stmmac_hw_fix_mac_speed(priv);
    break;
    case 100:
    case 10:
    - if (likely((priv->plat->has_gmac) ||
    - (priv->plat->has_gmac4))) {
    + if (likely(priv->plat->has_gmac ||
    + priv->plat->has_gmac4)) {
    ctrl |= priv->hw->link.port;
    if (phydev->speed == SPEED_100) {
    ctrl |= priv->hw->link.speed;
    diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
    index d9893cf..a695773 100644
    --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
    +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
    @@ -257,7 +257,7 @@ int stmmac_mdio_register(struct net_device *ndev)
    * If an IRQ was provided to be assigned after
    * the bus probe, do it here.
    */
    - if ((!mdio_bus_data->irqs) &&
    + if (!mdio_bus_data->irqs &&
    (mdio_bus_data->probed_phy_irq > 0)) {
    new_bus->irq[addr] =
    mdio_bus_data->probed_phy_irq;
    --
    2.10.2
    \
     
     \ /
      Last update: 2017-02-15 10:51    [W:4.993 / U:0.164 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site