lkml.org 
[lkml]   [2017]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] Make EN2 pin optional in the TRF7970A driver
From
Date
Hello Rob,

Am 10.02.2017 um 16:51 schrieb Rob Herring:
> On Tue, Feb 07, 2017 at 06:22:04AM +0100, Heiko Schocher wrote:
>> From: Guan Ben <ben.guan@cn.bosch.com>
>>
>> Make the EN2 pin optional. This is useful for boards,
>> which have this pin fix wired, for example to ground.
>>
>> Signed-off-by: Guan Ben <ben.guan@cn.bosch.com>
>> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
>> Signed-off-by: Heiko Schocher <hs@denx.de>
>>
>> ---
>>
>> .../devicetree/bindings/net/nfc/trf7970a.txt | 4 ++--
>> drivers/nfc/trf7970a.c | 26 ++++++++++++----------
>> 2 files changed, 16 insertions(+), 14 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
>> index 32b35a0..5889a3d 100644
>> --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
>> +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
>> @@ -5,8 +5,8 @@ Required properties:
>> - spi-max-frequency: Maximum SPI frequency (<= 2000000).
>> - interrupt-parent: phandle of parent interrupt handler.
>> - interrupts: A single interrupt specifier.
>> -- ti,enable-gpios: Two GPIO entries used for 'EN' and 'EN2' pins on the
>> - TRF7970A.
>> +- ti,enable-gpios: One or two GPIO entries used for 'EN' and 'EN2' pins on the
>> + TRF7970A. EN2 is optional.
>
> Could EN ever be optional/fixed? If so, perhaps deprecate this property
> and do 2 properties, one for each pin.

The hardware I have has the EN2 pin fix connected to ground. Looking
into http://www.ti.com/lit/ds/slos743k/slos743k.pdf page 19 table 6-3
and 6-4 the EN2 pin is a don;t core if EN = 1. If EN = 0 EN2 pin
selects between Power Down and Sleep Mode ... I see no reason why
this is not possible/allowed ...

Hmm.. I do not like the idea of deprecating the "ti,enable-gpios"
property into 2 seperate properties ... but if this would be a reason
for not accepting this patch, I can do this ... How should I name
the 2 new properties?

"ti,pin-enable" and "ti,pin-enable2" ?

bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

\
 
 \ /
  Last update: 2017-02-13 07:38    [W:0.095 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site