lkml.org 
[lkml]   [2017]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V6 1/5] LIB: Indirect ISA/LPC port IO introduced
From
Date
Hi, Alex,


On 2017/2/1 3:37, Alexander Graf wrote:
>
>
> On 31/01/2017 14:32, John Garry wrote:
>> On 30/01/2017 17:12, Alexander Graf wrote:
>>> On 01/24/2017 08:05 AM, zhichang.yuan wrote:
>>>> Low-pin-count interface is integrated into some SoCs. The accesses to
>>>> those
>>>> peripherals under LPC make use of I/O ports rather than the memory
>>>> mapped I/O.
>>>>
>>>> To drive these devices, this patch introduces a method named
>>>> indirect-IO.
>>>> In this method the in/out() accessor in include/asm-generic/io.h will be
>>>> redefined. When upper layer drivers call in/out() with those known
>>>> legacy port
>>>> addresses to access the peripherals, the I/O operations will be routed
>>>> to the
>>>> right hooks which are registered specific to the host device, such as
>>>> LPC.
>>>> Then the hardware relevant manupulations are finished by the
>>>> corresponding
>>>> host.
>>>>
>>>> According to the comments on V5, this patch adds a common indirect-IO
>>>> driver
>>>> which support this I/O indirection to the generic directory.
>>>>
>>>> In the later pathches, some host-relevant drivers are implemented to
>>>> support
>>>> the specific I/O hooks and register them.
>>>> Based on these, the upper layer drivers which depend on in/out() can
>>>> work well
>>>> without any extra work or any changes.
>>>>
>>>> Signed-off-by: zhichang.yuan <yuanzhichang@hisilicon.com>
>>>> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
>>>> Signed-off-by: John Garry <john.garry@huawei.com>
>>>
>>> I like the extio idea. That allows us to handle all PIO requests on
>>> platforms that don't have native PIO support via different routes
>>> depending on the region they're in. Unfortunately we now we have 2
>>> frameworks for handling sparse PIO regions: One in extio, one in PCI.
>>>
>>> Why don't we just merge the two? Most of the code that has #ifdef
>>> PCI_IOBASE throughout the code base sounds like an ideal candidate to
>>> get migrated to extio instead. Then we only have a single framework to
>>> worry about ...
>>
>> To be clear, are you suggesting we merge the functionality from
>> pci_register_io_range(), pci_pio_to_address(), pci_address_to_pio() into
>> extio, so extio manages all PIO?
>
> Yes, I guess so.
>
>> And having a single type of node to
>> register PIO ranges, by amalgamating struct extio_node and io_range (as
>> Bjorn mentioned)?
>
> I'm not quite sure I follow you here. Basically I think you want a generic "non-x86 PIO" framework that PCI just plugs into.
>
> I don't think that necessarily means you want to statically allocate regions of that PIO space to separate (pseudo-)devices. Instead, everyone shares that space and should be able to fail gracefully if some space is already occupied.
>
>> It would make sense. We would be somewhat decoupling PIO from PCI.
>
> Yes :).
>
>> I think that other architectures, like PPC, and other code would need to
>> be fixed up to handle this.
>
> I think only PPC, Microblaze and ARM are using this. Grep for PCI_IOBASE. It's not that many.
>
>> We need to consider all the other challenges/obstacles to this.
>
> Well, getting our abstraction levels right to me sounds like it's worth the obstacles.
>
>>
>>>
>>>> ---
>>>> include/asm-generic/io.h | 50 ++++++++++++++++
>>>> include/linux/extio.h | 85 +++++++++++++++++++++++++++
>>>> include/linux/io.h | 1 +
>>>> lib/Kconfig | 8 +++
>>>> lib/Makefile | 2 +
>>>> lib/extio.c | 147
>>>> +++++++++++++++++++++++++++++++++++++++++++++++ xc>> create mode
>>>> 100644 include/linux/extio.h
>>>> create mode 100644 lib/extio.c
>>>>
>>
>> <snip>
>>
>>>> + * Copyright (C) 2016 Hisilicon Limited, All Rights Reserved.
>>>> + * Author: Zhichang Yuan <yuanzhichang@hisilicon.com>
>>>> + *
>>>> + * This program is free software; you can redistribute it and/or modify
>>>> + * it under the terms of the GNU General Public License version 2 as
>>>> + * published by the Free Software Foundation.
>>>> + *
>>>> + * This program is distributed in the hope that it will be useful,
>>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>>> + * GNU General Public License for more details.
>>>> + *
>>>> + * You should have received a copy of the GNU General Public License
>>>> + * along with this program. If not, see
>>>> <http://www.gnu.org/licenses/>.
>>>> + */
>>>> +
>>>> +#include <linux/io.h>
>>>> +#include <linux/spinlock.h>
>>>> +
>>>> +static LIST_HEAD(extio_dev_list);
>>>> +static DEFINE_RWLOCK(extio_list_lock);
>>>
>>> Why not just make the list an RCU list? Then you don't need read locks.
>>> We also wouldn't create potential lock contention between devices that
>>> could easily have parallel PIO operations (say a PCI device and an LPC
>>> device).
>>>
>>
>> OK
>>
>>>> +
>>>> +void register_extio(struct extio_node *node)
>>>> +{
>>>> + write_lock(&extio_list_lock);
>>>> + list_add_tail(&node->list, &extio_dev_list);
>>>> + write_unlock(&extio_list_lock);
>>>> +}
>>>> +
>>>> +static struct extio_node *find_extio_token(unsigned long addr)
>>>> +{
>>>> + struct extio_node *extio_entry;
>>>> +
>>>> + read_lock(&extio_list_lock);
>>>> + list_for_each_entry(extio_entry, &extio_dev_list, list) {
>>>> + if ((addr < extio_entry->io_start + extio_entry->range_size) &&
>>>> + (addr >= extio_entry->io_start))
>>>> + break;
>>>> + }
>>>> + read_unlock(&extio_list_lock);
>>>> + return (&extio_entry->list == &extio_dev_list) ? NULL :
>>>> extio_entry;
>>>> +}
>>>> +
>>>> +struct extio_node *extio_find_node(struct fwnode_handle *node)
>>>> +{
>>>> + struct extio_node *entry;
>>>> +
>>>> + read_lock(&extio_list_lock);
>>>> + list_for_each_entry(entry, &extio_dev_list, list) {
>>>> + if (entry->fwnode == node)
>>>> + break;
>>>> + }
>>>> + read_unlock(&extio_list_lock);
>>>> +
>>>> + return (&entry->list == &extio_dev_list) ? NULL : entry;
>>>> +}
>>>> +
>>>> +unsigned long extio_translate(struct fwnode_handle *node,
>>>> + unsigned long bus_addr)
>>>> +{
>>>> + struct extio_node *entry;
>>>> + unsigned long port_id = -1;
>>>> +
>>>> + read_lock(&extio_list_lock);
>>>> + list_for_each_entry(entry, &extio_dev_list, list) {
>>>> + if (entry->fwnode == node &&
>>>> + bus_addr >= entry->bus_start &&
>>>> + bus_addr - entry->bus_start < entry->range_size)
>>>> + port_id = entry->io_start + bus_addr -
>>>> + entry->bus_start;
>>>> + }
>>>> + read_unlock(&extio_list_lock);
>>>> +
>>>> + return port_id;
>>>> +}
>>>> +
>>>> +#ifdef PCI_IOBASE
>>>> +
>>>> +#define BUILD_EXTIO(bw, type) \
>>>> +type extio_in##bw(unsigned long addr) \
>>>> +{ \
>>>> + struct extio_node *extio_entry = find_extio_token(addr); \
>>>> + \
>>>> + if (!extio_entry) \
>>>> + return read##bw(PCI_IOBASE + addr); \
>>>> + return extio_entry->ops->pfin ? \
>>>> + extio_entry->ops->pfin(extio_entry->devpara, \
>>>> + addr, sizeof(type)) : -1; \
>>>> +} \
>>>> + \
>>>> +void extio_out##bw(type value, unsigned long addr) \
>>>> +{ \
>>>> + struct extio_node *extio_entry = find_extio_token(addr); \
>>>> + \
>>>> + if (!extio_entry) \
>>>> + write##bw(value, PCI_IOBASE + addr); \
>>>
>>> All of the fallback code would also disappear as a nice side effect of
>>> making pci pio handling a user of extio :).
>>
>> Is your idea that PCI IO space will also register accessors, which would
>> be the same read{b,w,l}/write{b,w,l}?

I am not so sure what is your ideas on this. Do you mean the snippet like these:

#define BUILD_IO(bw, type) \
type extio_in##bw(unsigned long addr) \
{ \
struct io_range *entry = find_io_range(addr); \
\
if (entry) \
return entry->ops->pfin(entry->devpara, \
addr, sizeof(type)); \
return read##bw(PCI_IOBASE + addr); \
}

we add the last 'return read##bw(PCI_IOBASE + addr);' to keep the original logic of inX() in asm-generic/io.h;
In above snippet, all the hosts applied extio should register their own ops->pfin().


Thanks,
Zhichang


>
> Yes. If you need to later on accelerate that bit, you can always do something like
>
> if (extio_entry->ops->pfin == pci_extio_in)
> return pci_extio_in(...);
>
> which should get you all the prefetcher and branch prediction benefits that the current version gives you. But for starters I'd leave that out, since I doubt it'll have measurable performance impact to go via an indirect function call.
>
>>
>>>
>>
>> It would be nice to have a quicker way to so the lookup from address to
>> node, as we loop all nodes in find_extio_token() every single time.
>
> You can always replace the search with a tree. But to me that's an implementation detail that's easy enough to replace in a follow-up patch series.
>
>
> Alex
>
> .
>

\
 
 \ /
  Last update: 2017-02-13 15:23    [W:0.127 / U:0.876 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site