lkml.org 
[lkml]   [2017]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] smiapp: add CCP2 support
Thanks, Pavel! :-)

Besides this patch, what else is needed? The CSI-2 / CCP2 support is
missing in V4L2 OF at least. It'd be better to have this all in the same
set.

I pushed the two DT patches here:

<URL:https://git.linuxtv.org/sailus/media_tree.git/commit/?h=ccp2>

On Wed, Feb 08, 2017 at 02:11:27PM +0100, Pavel Machek wrote:
>
> Add support for CCP2 connected SMIA sensors as found
> on the Nokia N900.
>
> Signed-off-by: Sebastian Reichel <sre@kernel.org>
> Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
> Signed-off-by: Pavel Machek <pavel@ucw.cz>
>
> diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c
> index 44f8c7e..c217bc6 100644
> --- a/drivers/media/i2c/smiapp/smiapp-core.c
> +++ b/drivers/media/i2c/smiapp/smiapp-core.c
> @@ -2997,13 +2997,19 @@ static struct smiapp_hwconfig *smiapp_get_hwconfig(struct device *dev)
> switch (bus_cfg->bus_type) {
> case V4L2_MBUS_CSI2:
> hwcfg->csi_signalling_mode = SMIAPP_CSI_SIGNALLING_MODE_CSI2;
> + hwcfg->lanes = bus_cfg->bus.mipi_csi2.num_data_lanes;
> + break;
> + case V4L2_MBUS_CCP2:
> + hwcfg->csi_signalling_mode = (bus_cfg->bus.mipi_csi1.strobe) ?
> + SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_STROBE :
> + SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK;
> + hwcfg->lanes = 1;
> break;
> - /* FIXME: add CCP2 support. */
> default:
> + dev_err(dev, "unknown bus protocol\n");

It's rather unsupported --- V4L2 OF framework picks one from enum
v4l2_mbus_type. You might want to print the value, too. Up to you.

> goto out_err;
> }
>
> - hwcfg->lanes = bus_cfg->bus.mipi_csi2.num_data_lanes;
> dev_dbg(dev, "lanes %u\n", hwcfg->lanes);
>
> /* NVM size is not mandatory */
> @@ -3017,8 +3023,8 @@ static struct smiapp_hwconfig *smiapp_get_hwconfig(struct device *dev)
> goto out_err;
> }
>
> - dev_dbg(dev, "nvm %d, clk %d, csi %d\n", hwcfg->nvm_size,
> - hwcfg->ext_clk, hwcfg->csi_signalling_mode);
> + dev_dbg(dev, "nvm %d, clk %d, mode %d\n",
> + hwcfg->nvm_size, hwcfg->ext_clk, hwcfg->csi_signalling_mode);
>
> if (!bus_cfg->nr_of_link_frequencies) {
> dev_warn(dev, "no link frequencies defined\n");
>


--
Kind regards,

Sakari Ailus
e-mail: sakari.ailus@iki.fi XMPP: sailus@retiisi.org.uk

\
 
 \ /
  Last update: 2017-02-11 23:08    [W:0.064 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site