lkml.org 
[lkml]   [2017]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] arm64: dts: Enable ir-spi in the tm2 and tm2e boards
Hi Javier,

On Fri, Feb 10, 2017 at 11:04:50AM -0300, Javier Martinez Canillas wrote:
> On 02/09/2017 11:22 PM, Andi Shyti wrote:
...
> > + irda_regulator: irda-regulator {
> > + compatible = "regulator-fixed";
> > + enable-active-high;
> > + gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
> > + regulator-name = "irda_regulator";
>
> How is this regulator named in the board schematics? My
> understanding is that regulator-name should match this.
>
> I don't have access to this so it may be "irda_regulator"
> although I was expecting something more like "VDD_IRDA".

This is not a real regulator.

This is an external regulator which is enabled with a gpio
(GPR3[3]). The regulator-fixed allows me to use the regulator API
even though I would only need to control a gpio (with the gpio
API). I prefer using regulator to keep the same interface no
matter how the irda is connected.

About the name, I have full freedom to chose as of course it's
not documented in the exynos5433 datasheet. Perhaps I could call
it irda-gpio-regulator to make it more clear?

> Patch looks good to me though:
>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Thanks,
Andi

\
 
 \ /
  Last update: 2017-02-11 05:44    [W:0.315 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site