lkml.org 
[lkml]   [2017]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 3/3] serial: ifx6x60: Add some spaces for better code readability
From
Date
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Sat, 9 Dec 2017 19:55:31 +0100

Use space characters at some source code places according to
the Linux coding style convention.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
---
drivers/tty/serial/ifx6x60.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 1883e3382338..f40f64378406 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -248,8 +248,8 @@ static void mrdy_assert(struct ifx_spi_device *ifx_dev)
if (!val) {
if (!test_and_set_bit(IFX_SPI_STATE_TIMER_PENDING,
&ifx_dev->flags)) {
- mod_timer(&ifx_dev->spi_timer,jiffies + IFX_SPI_TIMEOUT_SEC*HZ);
-
+ mod_timer(&ifx_dev->spi_timer,
+ jiffies + IFX_SPI_TIMEOUT_SEC * HZ);
}
}
ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_DATA_PENDING);
@@ -378,7 +378,7 @@ static int ifx_spi_decode_spi_header(unsigned char *buffer, int *length,
u16 *in_buffer = (u16 *)buffer;

h1 = *in_buffer;
- h2 = *(in_buffer+1);
+ h2 = *(in_buffer + 1);

if (h1 == 0 && h2 == 0) {
*received_cts = 0;
@@ -410,7 +410,7 @@ static void ifx_spi_setup_spi_header(unsigned char *txbuffer, int tx_count,
unsigned char more)
{
*(u16 *)(txbuffer) = tx_count;
- *(u16 *)(txbuffer+2) = IFX_SPI_PAYLOAD_SIZE;
+ *(u16 *)(txbuffer + 2) = IFX_SPI_PAYLOAD_SIZE;
txbuffer[1] |= (more << IFX_SPI_MORE_BIT) & IFX_SPI_MORE_MASK;
}

@@ -467,8 +467,8 @@ static int ifx_spi_prepare_tx_buffer(struct ifx_spi_device *ifx_dev)
/* have data and info for header -- set up SPI header in buffer */
/* spi header needs payload size, not entire buffer size */
ifx_spi_setup_spi_header(ifx_dev->tx_buffer,
- tx_count-IFX_SPI_HEADER_OVERHEAD,
- ifx_dev->spi_more);
+ tx_count - IFX_SPI_HEADER_OVERHEAD,
+ ifx_dev->spi_more);
/* swap actual data in the buffer */
ifx_dev->swap_buf((ifx_dev->tx_buffer), tx_count,
&ifx_dev->tx_buffer[IFX_SPI_TRANSFER_SIZE]);
@@ -1163,7 +1163,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)

ret = request_irq(gpio_to_irq(ifx_dev->gpio.reset_out),
ifx_spi_reset_interrupt,
- IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING, DRVNAME,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, DRVNAME,
ifx_dev);
if (ret) {
dev_err(&spi->dev, "Unable to get irq %x\n",
--
2.15.1
\
 
 \ /
  Last update: 2017-12-09 20:14    [W:0.064 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site