lkml.org 
[lkml]   [2017]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/3] ath9k: remove stray backslash in Makefile
Date
Jakub Kicinski <kubakici@wp.pl> writes:

> On Mon, 27 Nov 2017 18:56:21 +0100, Matthias Schiffer wrote:
>> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
>> ---
>> drivers/net/wireless/ath/ath9k/Makefile | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
>> index 36a40ffdce15..90e4a341076c 100644
>> --- a/drivers/net/wireless/ath/ath9k/Makefile
>> +++ b/drivers/net/wireless/ath/ath9k/Makefile
>> @@ -59,7 +59,7 @@ obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
>> obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
>> ath9k_common-y:= common.o \
>> common-init.o \
>> - common-beacon.o \
>> + common-beacon.o
>>
>
> It's not necessarily stray, there is nothing on the next line so it's
> OK, and if you add \ at the end of all lines, you don't have to touch
> the last line every time you add/remove something. Sort of like
> putting a , after last enum value.

I agree with Jakub, I think the backslash is there on purpose so I
dropped this patch.

--
Kalle Valo
\
 
 \ /
  Last update: 2017-12-07 15:31    [W:0.090 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site