lkml.org 
[lkml]   [2017]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] eeprom: at24: fix coding style issues
Date
Fix issues reported by checkpatch for at24.c.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
---
drivers/misc/eeprom/at24.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 625b00166117..2426f2c111c7 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -70,8 +70,8 @@ struct at24_data {
*/
struct mutex lock;

- unsigned write_max;
- unsigned num_addresses;
+ unsigned int write_max;
+ unsigned int num_addresses;
unsigned int offset_adj;

struct nvmem_config nvmem_config;
@@ -93,16 +93,16 @@ struct at24_data {
*
* This value is forced to be a power of two so that writes align on pages.
*/
-static unsigned io_limit = 128;
-module_param(io_limit, uint, 0);
+static unsigned int io_limit = 128;
+module_param(io_limit, uint, 0000);
MODULE_PARM_DESC(io_limit, "Maximum bytes per I/O (default 128)");

/*
* Specs often allow 5 msec for a page write, sometimes 20 msec;
* it's important to recover from write timeouts.
*/
-static unsigned write_timeout = 25;
-module_param(write_timeout, uint, 0);
+static unsigned int write_timeout = 25;
+module_param(write_timeout, uint, 0000);
MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)");

#define AT24_SIZE_BYTELEN 5
@@ -111,8 +111,8 @@ MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)");
#define AT24_BITMASK(x) (BIT(x) - 1)

/* create non-zero magic value for given eeprom parameters */
-#define AT24_DEVICE_MAGIC(_len, _flags) \
- ((1 << AT24_SIZE_FLAGS | (_flags)) \
+#define AT24_DEVICE_MAGIC(_len, _flags) \
+ ((1 << AT24_SIZE_FLAGS | (_flags)) \
<< AT24_SIZE_BYTELEN | ilog2(_len))

/*
@@ -264,7 +264,7 @@ MODULE_DEVICE_TABLE(acpi, at24_acpi_ids);
static struct at24_client *at24_translate_offset(struct at24_data *at24,
unsigned int *offset)
{
- unsigned i;
+ unsigned int i;

if (at24->chip.flags & AT24_FLAG_ADDR16) {
i = *offset >> 16;
@@ -319,7 +319,7 @@ static ssize_t at24_regmap_read(struct at24_data *at24, char *buf,
static size_t at24_adjust_write_count(struct at24_data *at24,
unsigned int offset, size_t count)
{
- unsigned next_page;
+ unsigned int next_page;

/* write_max is at most a page */
if (count > at24->write_max)
@@ -515,7 +515,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
bool writable;
struct at24_data *at24;
int err;
- unsigned i, num_addresses;
+ unsigned int i, num_addresses;
const struct regmap_config *config;
u8 test_byte;

--
2.15.1
\
 
 \ /
  Last update: 2017-12-07 14:39    [W:0.074 / U:0.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site