lkml.org 
[lkml]   [2017]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 35/75] PCI: dra7xx: Create functional dependency between PCIe and PHY
Date
4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kishon Vijay Abraham I <kishon@ti.com>


[ Upstream commit 7a4db656a6350f8dd46f711bdef3b0e9c6e3f4cb ]

PCI core access configuration space registers in resume_noirq callbacks.
In the case of dra7xx, PIPE3 PHY connected to PCIe controller has to be
enabled before accessing configuration space registers. Since
PIPE3 PHY is enabled by only configuring control module registers, no
aborts has been observed so far (though during noirq stage, interface
clock of PIPE3 PHY is not enabled).

With new TRM updates, PIPE3 PHY has to be initialized (PIPE3 PHY
registers has to be accessed) as well which requires the interface
clock of PIPE3 PHY to be enabled. The interface clock of PIPE3 PHY is
derived from OCP2SCP and hence PCIe PHY is modeled as a child of
OCP2SCP. Since pm_runtime is not enabled during noirq stage,
pm_runtime_get_sync done in phy_init doesn't enable
OCP2SCP clocks resulting in abort when PIPE3 PHY registers are
accessed.

Create a function dependency between PCIe and PHY here to make
sure PCIe is suspended before PCIe PHY/OCP2SCP and resumed after
PCIe PHY/OCP2SCP.

Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/pci/dwc/pci-dra7xx.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -11,6 +11,7 @@
*/

#include <linux/delay.h>
+#include <linux/device.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -594,6 +595,7 @@ static int __init dra7xx_pcie_probe(stru
int i;
int phy_count;
struct phy **phy;
+ struct device_link **link;
void __iomem *base;
struct resource *res;
struct dw_pcie *pci;
@@ -649,11 +651,21 @@ static int __init dra7xx_pcie_probe(stru
if (!phy)
return -ENOMEM;

+ link = devm_kzalloc(dev, sizeof(*link) * phy_count, GFP_KERNEL);
+ if (!link)
+ return -ENOMEM;
+
for (i = 0; i < phy_count; i++) {
snprintf(name, sizeof(name), "pcie-phy%d", i);
phy[i] = devm_phy_get(dev, name);
if (IS_ERR(phy[i]))
return PTR_ERR(phy[i]);
+
+ link[i] = device_link_add(dev, &phy[i]->dev, DL_FLAG_STATELESS);
+ if (!link[i]) {
+ ret = -EINVAL;
+ goto err_link;
+ }
}

dra7xx->base = base;
@@ -732,6 +744,10 @@ err_get_sync:
pm_runtime_disable(dev);
dra7xx_pcie_disable_phy(dra7xx);

+err_link:
+ while (--i >= 0)
+ device_link_del(link[i]);
+
return ret;
}


\
 
 \ /
  Last update: 2017-12-07 14:12    [W:0.344 / U:11.292 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site