lkml.org 
[lkml]   [2017]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/2] clocksource: sprd: Add timer driver for Spreadtrum SC9860 platform
From
Date
On 28/11/2017 03:45, Baolin Wang wrote:
> The Spreadtrum SC9860 platform will use the architected timers as local
> clock events, but we also need a broadcast timer device to wakeup the
> cpus when the cpus are in sleep mode.
>
> Thus this patch registers the timer0 to be a broadcast timer supporting
> periodic and oneshot events.

This changelog is inadequate. It is pointless to explain why you submit
this driver.

It would be much more interesting to describe the timer internals.

> Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
> ---
> Changes since v1:
> - Change to 32bit counter to avoid build warning.
> ---
> drivers/clocksource/Kconfig | 8 ++
> drivers/clocksource/Makefile | 1 +
> drivers/clocksource/sprd-timer.c | 211 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 220 insertions(+)
> create mode 100644 drivers/clocksource/sprd-timer.c

Even if it is not a general rule, can you rename this driver to
timer-sprd.c ? I would like little by little to converge all the timer
names to this pattern.

> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index c729a88..48c8702 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -441,6 +441,14 @@ config MTK_TIMER
> help
> Support for Mediatek timer driver.
>
> +config SPRD_TIMER
> + bool "Spreadtrum timer driver"
> + depends on GENERIC_CLOCKEVENTS

Remove GENERIC_CLOCKEVENTS because of:

https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/tree/drivers/clocksource/Kconfig#n2

> + depends on ARCH_SPRD || COMPILE_TEST

Remove the dependency on ARCH_SPRD, the arch's Kconfig must select
SPRD_TIMER.

Move the COMPILE_TEST as the other drivers.

bool "Spreadtrum timer driver" if COMPILE_TEST

> + select TIMER_O> + help
> + Enables the support for the Spreadtrum timer driver.
> +
> config SYS_SUPPORTS_SH_MTU2
> bool
>
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index 72711f1..62bf264 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -54,6 +54,7 @@ obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
> obj-$(CONFIG_CLKSRC_NPS) += timer-nps.o
> obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o
> obj-$(CONFIG_OWL_TIMER) += owl-timer.o
> +obj-$(CONFIG_SPRD_TIMER) += sprd-timer.o
>
> obj-$(CONFIG_ARC_TIMERS) += arc_timer.o
> obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
> diff --git a/drivers/clocksource/sprd-timer.c b/drivers/clocksource/sprd-timer.c
> new file mode 100644
> index 0000000..e90f948
> --- /dev/null
> +++ b/drivers/clocksource/sprd-timer.c
> @@ -0,0 +1,211 @@
> +/*
> + * Copyright (C) 2017 Spreadtrum Communications Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0
> + */

Please fix the above with proper format (one example in timer-of.c).

> +#include <linux/clocksource.h>
> +#include <linux/clockchips.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/sched_clock.h>

Are you sure you need sched_clock and clocksource ?

> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>

These headers won't be needed anymore when using the timer-of API (see
the init function comment below).

> +#define TIMER_NAME "sprd_timer"
> +
> +#define TIMER_LOAD_LO 0x0
> +#define TIMER_LOAD_HI 0x4
> +#define TIMER_VALUE_LO 0x8
> +#define TIMER_VALUE_HI 0xc
> +
> +#define TIMER_CTL 0x10
> +#define TIMER_CTL_PERIOD_MODE BIT(0)
> +#define TIMER_CTL_ENABLE BIT(1)
> +#define TIMER_CTL_64BIT_WIDTH BIT(16)
> +
> +#define TIMER_INT 0x14
> +#define TIMER_INT_EN BIT(0)
> +#define TIMER_INT_RAW_STS BIT(1)
> +#define TIMER_INT_MASK_STS BIT(2)
> +#define TIMER_INT_CLR BIT(3)
> +
> +#define TIMER_VALUE_SHDW_LO 0x18
> +#define TIMER_VALUE_SHDW_HI 0x1c
> +
> +#define TIMER_VALUE_LO_MASK GENMASK(31, 0)
> +
> +struct sprd_timer_device {
> + struct clock_event_device ce;
> + void __iomem *base;
> + u32 freq;
> + int irq;
> +};
> +
> +static inline struct sprd_timer_device *
> +to_sprd_timer(struct clock_event_device *c)
> +{
> + return container_of(c, struct sprd_timer_device, ce);
> +}
> +
> +static void sprd_timer_enable(struct sprd_timer_device *timer, u32 flag)
> +{
> + u32 val = readl_relaxed(timer->base + TIMER_CTL);
> +
> + val |= TIMER_CTL_ENABLE;
> + if (flag & TIMER_CTL_64BIT_WIDTH)
> + val |= TIMER_CTL_64BIT_WIDTH;
> + else
> + val &= ~TIMER_CTL_64BIT_WIDTH;
> +
> + if (flag & TIMER_CTL_PERIOD_MODE)
> + val |= TIMER_CTL_PERIOD_MODE;
> + else
> + val &= ~TIMER_CTL_PERIOD_MODE;
> +
> + writel_relaxed(val, timer->base + TIMER_CTL);
> +}
> +
> +static void sprd_timer_disable(struct sprd_timer_device *timer)
> +{
> + u32 val = readl_relaxed(timer->base + TIMER_CTL);
> +
> + val &= ~TIMER_CTL_ENABLE;
> + writel_relaxed(val, timer->base + TIMER_CTL);
> +}
> +
> +static void sprd_timer_update_counter(struct sprd_timer_device *timer,
> + unsigned long cycles)
> +{
> + writel_relaxed(cycles & TIMER_VALUE_LO_MASK,
> + timer->base + TIMER_LOAD_LO);
> + writel_relaxed(0, timer->base + TIMER_LOAD_HI);
> +}
> +
> +static void sprd_timer_enable_interrupt(struct sprd_timer_device *timer)
> +{
> + writel_relaxed(TIMER_INT_EN, timer->base + TIMER_INT);
> +}
> +
> +static void sprd_timer_clear_interrupt(struct sprd_timer_device *timer)
> +{
> + u32 val = readl_relaxed(timer->base + TIMER_INT);
> +
> + val |= TIMER_INT_CLR;
> + writel_relaxed(val, timer->base + TIMER_INT);
> +}
> +
> +static int sprd_timer_set_next_event(unsigned long cycles,
> + struct clock_event_device *ce)
> +{
> + struct sprd_timer_device *timer = to_sprd_timer(ce);
> +
> + sprd_timer_disable(timer);
> + sprd_timer_update_counter(timer, cycles);
> + sprd_timer_enable(timer, 0);
> +
> + return 0;
> +}
> +
> +static int sprd_timer_set_periodic(struct clock_event_device *ce)
> +{
> + struct sprd_timer_device *timer = to_sprd_timer(ce);
> + unsigned long cycles = DIV_ROUND_UP(timer->freq, HZ);
> +
> + sprd_timer_disable(timer);
> + sprd_timer_update_counter(timer, cycles);
> + sprd_timer_enable(timer, TIMER_CTL_PERIOD_MODE);
> +
> + return 0;
> +}
> +
> +static int sprd_timer_shutdown(struct clock_event_device *ce)
> +{
> + struct sprd_timer_device *timer = to_sprd_timer(ce);
> +
> + sprd_timer_disable(timer);
> + return 0;
> +}
> +
> +static irqreturn_t sprd_timer_interrupt(int irq, void *dev_id)
> +{
> + struct sprd_timer_device *timer = dev_id;
> +
> + sprd_timer_clear_interrupt(timer);
> +
> + if (clockevent_state_oneshot(&timer->ce))
> + sprd_timer_disable(timer);
> +
> + timer->ce.event_handler(&timer->ce);
> + return IRQ_HANDLED;
> +}
> +
> +static void __init sprd_timer_clkevt_init(struct sprd_timer_device *timer)
> +{
> + timer->ce.features = CLOCK_EVT_FEAT_DYNIRQ | CLOCK_EVT_FEAT_PERIODIC |
> + CLOCK_EVT_FEAT_ONESHOT;
> + timer->ce.set_next_event = sprd_timer_set_next_event;
> + timer->ce.set_state_periodic = sprd_timer_set_periodic;
> + timer->ce.set_state_shutdown = sprd_timer_shutdown;
> + timer->ce.name = TIMER_NAME;
> + timer->ce.rating = 300;
> + timer->ce.irq = timer->irq;
> + timer->ce.cpumask = cpu_possible_mask;
> +
> + sprd_timer_enable_interrupt(timer);
> + clockevents_config_and_register(&timer->ce, timer->freq, 1, UINT_MAX);
> +}
> +
> +static int __init sprd_timer_init(struct device_node *np)
> +{
> + struct sprd_timer_device *timer;
> + int ret;
> +
> + timer = kzalloc(sizeof(*timer), GFP_KERNEL);
> + if (!timer)
> + return -ENOMEM;
> +
> + ret = of_property_read_u32(np, "clock-frequency", &timer->freq);
> + if (ret) {
> + pr_err("failed to get clock frequency\n");
> + goto err_freq;
> + }
> +
> + timer->base = of_iomap(np, 0);
> + if (!timer->base) {
> + pr_err("%s: unable to map resource\n", np->name);
> + ret = -ENXIO;
> + goto err_freq;
> + }
> +
> + timer->irq = irq_of_parse_and_map(np, 0);
> + if (timer->irq < 0) {
> + pr_crit("%s: unable to parse timer irq\n", np->name);
> + ret = timer->irq;
> + goto err_map_irq;
> + }
> +
> + ret = request_irq(timer->irq, sprd_timer_interrupt, IRQF_TIMER,
> + TIMER_NAME, timer);
> + if (ret) {
> + pr_err("failed to setup irq %d\n", timer->irq);
> + goto err_request_irq;
> + }
> + sprd_timer_clkevt_init(timer);

Please use the timer-of API, that will save you all these operations and
checks.

One example at:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/clocksource/sun4i_timer.c#n143

And then use the function:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/clocksource/sun4i_timer.c#n174


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2017-12-07 11:45    [W:0.076 / U:0.840 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site