lkml.org 
[lkml]   [2017]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH/RFC v2] leds: trigger: Introduce a NETDEV trigger
Hi Jacek,

On 5 December 2017 at 20:38, Jacek Anaszewski
<jacek.anaszewski@gmail.com> wrote:
> Hi Ben,
>
> On 12/05/2017 12:19 PM, Ben Whitten wrote:
>> From: Ben Whitten <ben.whitten@gmail.com>
>>
>> The patch was converted to led_blink_oneshot, in doing so we find that the
>> behaviour has changed. As I dont want to break 'userspace' led behaviour this
>> patch shouldn't be merged as is. Open to suggestions.
>>
>> Given an interval of 50ms and heavy throughput, the previous implementation
>> produced a blink with 100ms period and 50% dutycycle. The led_blink_oneshot
>> version produces a blink with 140ms period and 57% dutycycle.
>
> Please check if the LED class driver you're testing the trigger with
> implements blink_set op. If yes it would be good to check if it doesn't
> align the delay intervals to the hardware capabilities instead of
> failing and relying on a LED core software blink fallback.

The led are using gpio-led set from device tree on an embedded system, sama5
based. So as far as I can tell blink_op is NULL in this case and it
then relies on
software for the blink in the form of timers.
I assume its the jiffies playing a part here, taking a jiffy or two to
queue up a flash
may add 10ms to the desired 50ms delay_on/delay_off that I am seeing. Then the
extra time may be due to the stats workqueue not aligning with the
blink timer to
kick it off again.

Best regards,
Ben

\
 
 \ /
  Last update: 2017-12-06 21:08    [W:0.057 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site