lkml.org 
[lkml]   [2017]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] ARM64: dts: meson-axg: add ethernet mac controller
Date
Yixun Lan <yixun.lan@amlogic.com> writes:

> Add DT info for the stmmac ethernet MAC which found in
> the Amlogic's Meson-AXG SoC, also describe the ethernet
> pinctrl & clock information here.
>
> This is tested in the S400 dev board which use a RTL8211F PHY,
> and the pins connect to the 'eth_rgmii_y_pins' group.
>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>

This doesn't apply cleanly to mainline. Are there some dependencies
here that I'm not aware of?

Also...

> ---
> arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 7 ++++
> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 53 ++++++++++++++++++++++++++
> 2 files changed, 60 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> index 9eb6aaee155d..7b39a9fe2b0f 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
> @@ -21,3 +21,10 @@
> status = "okay";
> };
>
> +&ethmac {
> + status = "okay";
> + phy-mode = "rgmii";
> +
> + pinctrl-0 = <&eth_rgmii_y_pins>;
> + pinctrl-names = "default";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index 65945c6c8b65..57faaa9d8013 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -157,6 +157,19 @@
> #address-cells = <0>;
> };
>
> + ethmac: ethernet@ff3f0000 {
> + compatible = "amlogic,meson-axg-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";

The new "meson-axg-dwmac" is not documented in the binding. Can you add
that?

Kevin

\
 
 \ /
  Last update: 2017-12-06 21:07    [W:0.074 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site