lkml.org 
[lkml]   [2017]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 0/7] Switchtec NTB Crosslink Support
On Wed, Nov 29, 2017 at 12:58 PM, Logan Gunthorpe <logang@deltatee.com> wrote:
> Also, I forgot to mention, this patch set is based on today's ntb-next.

All of these look sane to me. Assuming they apply cleanly, adding to ntb-next.

Thanks,
Jon

>
> Logan
>
>
> On 29/11/17 10:55 AM, Logan Gunthorpe wrote:
>>
>> Hi,
>>
>> This patch series adds support for the Switchtec Crosslink feature.
>> Crosslink is similar to B2B in that it allows two switches to be
>> connected back to back.
>>
>> Two switches can already be connected between two hosts, however with this
>> setup, there would be no symmetry as one switch would handle NTB and the
>> other would just need to be a single partition switch. Our customers are
>> looking for a completely symmetric solution such that a host or switch
>> can be easily replaced without needing to worry about which half was
>> replaced.
>>
>> Crosslink solves this problem by having each of the switches configured
>> with two partitions. This results in a special host-less partition in
>> the middle of the connection which can be managed in such a way as
>> to forward all the traffic and still provide all the same NTB
>> functionality. In this way, both hosts and switches can be identical.
>>
>> Please see Patch 6 for a bit more detailed description of how Crosslink
>> works.
>>
>> Thanks,
>>
>> Logan
>>
>> Kelvin Cao (1):
>> ntb_hw_switchtec: Allow using Switchtec NTB in multi-partition setups
>>
>> Logan Gunthorpe (6):
>> ntb_hw_switchtec: Keep track of the number of LUT windows used by the
>> driver
>> ntb_hw_switchtec: Create helper function to setup reserved LUT MWs
>> ntb_hw_switchtec: Make switchtec_ntb_init_req_id_table() more general
>> ntb_hw_switchtec: Expand PFF CSR registers
>> ntb_hw_switchtec: Add initialization code for crosslink
>> ntb_hw_switchtec: Crosslink doorbells and messages
>>
>> drivers/ntb/hw/mscc/ntb_hw_switchtec.c | 494
>> +++++++++++++++++++++++++++------
>> include/linux/ntb.h | 15 +-
>> include/linux/switchtec.h | 23 +-
>> 3 files changed, 435 insertions(+), 97 deletions(-)
>>
>> --
>> 2.11.0
>>
>

\
 
 \ /
  Last update: 2017-12-05 20:16    [W:0.071 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site