Messages in this thread | | | Date | Mon, 4 Dec 2017 18:00:33 -0800 | From | Eduardo Valentin <> | Subject | Re: [PATCH V2] thermal/drivers/hisi: Switch to interrupt mode |
| |
Hello,
On Thu, Sep 28, 2017 at 09:32:20AM +0200, Daniel Lezcano wrote: > On Thu, Sep 28, 2017 at 02:57:52PM +0800, Leo Yan wrote: > > Hi Daniel, > > > > On Thu, Sep 28, 2017 at 07:13:44AM +0200, Daniel Lezcano wrote: > > > At this moment, we have both the interrupt setup and the polling enabled. The > > > interrupt does nothing more than forcing an update while the temperature is > > > polled every second. > > > > > > We can do much better than that, threshold is set to 65C in the DT and the > > > passive cooling device enters in the dance when 75C is reached. We need to > > > sample the temperature at 65C in order to let the IPA gather enough values for > > > the PID computation. If the SoC is running at a temperature below 65C, we will > > > be constantly polling for nothing. > > > > > > This patch disables the sensor when the temperature is below 65C and enables it > > > when passing the threshold. It results the thermal sensor driver will have no > > > activity most of the time. > > > > > > Cc: Keerthy <j-keerthy@ti.com> > > > Cc: Leo Yang <leo.yan@linaro.org> > > > > s/Yang/Yan :) Have tested this patch on Hikey at my side: > > Oops sorry :) > > > Reviewed-by: Leo Yan <leo.yan@linaro.org> > > Tested-by: Leo Yan <leo.yan@linaro.org> >
Is this still needed after the latest rework done?
> > Great! Thanks for testing. > > -- Daniel
| |