lkml.org 
[lkml]   [2017]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] regulator: sc2731: Add regulator driver to support Spreadtrum SC2731 PMIC
Hi Philippe,

On Fri, Dec 01, 2017 at 10:13:27AM +0100, Philippe Ombredanne wrote:
> Erik,
>
> On Fri, Dec 1, 2017 at 9:58 AM, Erick Chen <erick.chen@spreadtrum.com> wrote:
> > Add regulator driver for Spreadtrum SC2731 device.
> > It has 17 general purpose LDOs, BUCKs generator and
> > digital output to control regulators.
> >
> > Signed-off-by: Erick Chen <erick.chen@spreadtrum.com>
> > Reviewed-by: Baolin Wang <baolin.wang@spreadtrum.com>
> > ---
> > drivers/regulator/Kconfig | 7 +
> > drivers/regulator/Makefile | 1 +
> > drivers/regulator/sc2731-regulator.c | 276 ++++++++++++++++++++++++++++++++++
> > 3 files changed, 284 insertions(+)
> > create mode 100644 drivers/regulator/sc2731-regulator.c
> >
> > diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> > index 96cd55f..b27417c 100644
> > --- a/drivers/regulator/Kconfig
> > +++ b/drivers/regulator/Kconfig
> > @@ -744,6 +744,13 @@ config REGULATOR_S5M8767
> > via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
> > supports DVS mode with 8bits of output voltage control.
> >
> > +config REGULATOR_SC2731
> > + tristate "Spreadtrum SC2731 power regulator driver"
> > + depends on MFD_SC27XX_PMIC || COMPILE_TEST
> > + help
> > + This driver provides support for the voltage regulators on the
> > + SC2731 PMIC.
> > +
> > config REGULATOR_SKY81452
> > tristate "Skyworks Solutions SKY81452 voltage regulator"
> > depends on MFD_SKY81452
> > diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> > index 80ffc57..19fea09 100644
> > --- a/drivers/regulator/Makefile
> > +++ b/drivers/regulator/Makefile
> > @@ -95,6 +95,7 @@ obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o
> > obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
> > obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
> > obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
> > +obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o
> > obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o
> > obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
> > obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
> > diff --git a/drivers/regulator/sc2731-regulator.c b/drivers/regulator/sc2731-regulator.c
> > new file mode 100644
> > index 0000000..e56448a
> > --- /dev/null
> > +++ b/drivers/regulator/sc2731-regulator.c
> > @@ -0,0 +1,276 @@
> > +/*
> > + * Copyright (C) 2017 Spreadtrum Communications Inc.
> > + *
> > + * SPDX-License-Identifier: GPL-2.0
> > + */
>
> I think that per Linus, and Thomas doc patches for SPDX ids this
> should be instead either:
>
> > +// SPDX-License-Identifier: GPL-2.0
> > + // Copyright (c) 2017 Spreadtrum Communications Inc.
>
> or at least this with the id on the first and the // comment style
>

Thanks for pointing out this, and I will modify them in next version.

> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2017 Spreadtrum Communications Inc.
> > + *
> > + */

\
 
 \ /
  Last update: 2017-12-04 10:21    [W:2.196 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site