lkml.org 
[lkml]   [2017]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 0/2] memory: Introduce ti-emif-sram driver
From
Date


On 11/30/17 2:56 PM, Dave Gerlach wrote:
> This is a resend of v5 of this series found here [1]. It introduces
> relocatable PM handlers for the emif that are copied to sram and
> run from there during low power mode entry.
>
> The patches still have the previous ACKs but have a small change to
> accomodate a change made by Tony in commit cd57dc5a2099 ("ARM: dts:
> Add missing hwmod related nodes for am33xx"). If there are objections
> to this let me know ASAP.
>
> Now that a hwmod is present for the am335x EMIF, on probe fail the call to
> pm_runtime_put_sync causes the board to hang. In fact, this emif driver should
> never alter the PM state of the hardware at all through normal kernel calls, it
> is the job of the suspend handlers that are added, that is the whole point of
> this driver. Because of this, I have dropped all runtime pm calls, as any
> change to the PM state while the kernel is running is dangerous as we may shut
> of the memory controller. It makes the most sense just to drop runtime PM from
> the driver entirely. Besides that patch is unchanged.
>
> This code is required for low-power modes to work on AM335x and AM437x and a
> forthcoming PM series for those platforms will depend on this series. After
> both this and the PM series are reviewed I will send the necessary device tree
> changes for both, but in the meantime all remaining patches for am335x and
> am437x PM can be found here [2].
>
Applied

\
 
 \ /
  Last update: 2017-12-03 09:13    [W:0.062 / U:1.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site