lkml.org 
[lkml]   [2017]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: v4.15-rc5: resume took way too long, warning in syslog
On Fri 2017-12-29 11:23:36, Alan Stern wrote:
> On Fri, 29 Dec 2017, Pavel Machek wrote:
>
> > Hi!
> >
> > v4.15-rc5.. resume took _way_ too long, and I have warn_on in dmesg as
> > a bonus. It looks like USB problem...? I never seen this before.
>
> Is this problem very repeatable? Is there any possibility of bisecting
> to find the cause?

It is first time this happened.. Let me see if it reappears.

But I start to get feeling, that something like this is simply going
to happen from time to time... USB hubs are not exactly high-quality
parts, EMI, ...

Pavel



> > [42269.489765] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
> > [42269.577806] ata2: SATA link down (SStatus 0 SControl 300)
> > [42269.577851] ata5: SATA link down (SStatus 0 SControl 300)
> > [42269.677809] usb 1-1.6: reset high-speed USB device number 4 using ehci-pci
> > [42270.167923] psmouse serio1: synaptics: queried max coordinates: x [..5472], y [..4448]
> > [42270.361825] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> > [42270.363396] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> > [42270.363404] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> > [42270.363409] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> > [42270.366202] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> > [42270.366209] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> > [42270.366215] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
> > [42270.367116] ata1.00: configured for UDMA/133
> > [42273.571626] e1000e: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
> > [42273.571638] e1000e 0000:00:19.0 eth2: 10/100 speed: disabling TSO
> > [42274.421868] usb 2-1.1.4: reset high-speed USB device number 55 using ehci-pci
> > [42279.541849] usb 2-1.1.4: device descriptor read/64, error -110
> > [42295.157864] usb 2-1.1.4: device descriptor read/64, error -110
> > [42295.345865] usb 2-1.1.4: reset high-speed USB device number 55 using ehci-pci
> > [42300.533867] usb 2-1.1.4: device descriptor read/64, error -110
> > [42316.149843] usb 2-1.1.4: device descriptor read/64, error -110
> > [42316.337864] usb 2-1.1.4: reset high-speed USB device number 55 using ehci-pci
> > [42327.029859] usb 2-1.1.4: device not accepting address 55, error -110
> > [42327.113863] usb 2-1.1.4: reset high-speed USB device number 55 using ehci-pci
> > [42337.781888] usb 2-1.1.4: device not accepting address 55, error -110
>
> > [42337.913753] usb 2-1.1.4: new high-speed USB device number 56 using ehci-pci
> > [42338.395078] e1000e: eth2 NIC Link is Down
> > [42338.732172] systemd-journald[2470]: Received SIGTERM from PID 1 (systemd).
> > [42339.679602] systemd[1]: Unit systemd-journald.service entered failed state.
> > [42340.426957] systemd-journald[30462]: Received request to flush runtime journal from PID 1
> > [42343.029871] usb 2-1.1.4: device descriptor read/64, error -110
> > [42344.483918] e1000e: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
> > [42344.483927] e1000e 0000:00:19.0 eth2: 10/100 speed: disabling TSO
> > [42358.645164] usb 2-1.1.4: device descriptor read/64, error -110
> > [42358.833023] usb 2-1.1.4: new high-speed USB device number 57 using ehci-pci
> > [42364.018463] usb 2-1.1.4: device descriptor read/64, error -110
> > [42379.626669] usb 2-1.1.4: device descriptor read/64, error -110
> > [42379.735177] usb 2-1.1-port4: attempt power cycle
> > [42380.338299] usb 2-1.1.4: new high-speed USB device number 58 using ehci-pci
>
> It sure looks like that USB device (or maybe the hub it was connected
> to) decided to stop working during the suspend.
>
> Alan Stern

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-12-29 23:05    [W:0.032 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site