lkml.org 
[lkml]   [2017]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v12 1/5] dt-bindings: PCI: Add definition of PCIe WAKE# irq and PCI irq
* Jeffy Chen <jeffy.chen@rock-chips.com> [171226 02:11]:
> We are going to handle PCIe WAKE# pin for PCI devices in the pci core,
> so add definitions of the optional PCIe WAKE# pin for PCI devices.
>
> Also add an definition of the optional PCI interrupt pin for PCI
> devices to distinguish it from the PCIe WAKE# pin.

> --- a/Documentation/devicetree/bindings/pci/pci.txt
> +++ b/Documentation/devicetree/bindings/pci/pci.txt
> @@ -24,3 +24,13 @@ driver implementation may support the following properties:
> unsupported link speed, for instance, trying to do training for
> unsupported link speed, etc. Must be '4' for gen4, '3' for gen3, '2'
> for gen2, and '1' for gen1. Any other values are invalid.
> +
> +PCI devices may support the following properties:

This should say PCI ports instead of PCI devices.

> +- interrupts: Interrupt specifier for each name in interrupt-names.
> +- interrupt-names:
> + May contain "wakeup" for PCIe WAKE# interrupt and "pci" for PCI interrupt.
> + The PCI devices may optionally include an 'interrupts' property that
> + represents the legacy PCI interrupt. And when we try to specify the PCIe
> + WAKE# pin, a corresponding 'interrupt-names' property is required to
> + distinguish them.
> --
> 2.11.0
>
>

\
 
 \ /
  Last update: 2017-12-29 18:58    [W:0.047 / U:4.512 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site