lkml.org 
[lkml]   [2017]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: PROBLEM: 4.15.0-rc3 APIC causes lockups on Core 2 Duo laptop
    On Thu, Dec 28, 2017 at 10:48:35AM -0500, Alexandru Chirvasitu wrote:
    > On Thu, Dec 28, 2017 at 03:48:15PM +0100, Thomas Gleixner wrote:
    > > On Thu, 28 Dec 2017, Alexandru Chirvasitu wrote:
    > > > On Thu, Dec 28, 2017 at 12:00:47PM +0100, Thomas Gleixner wrote:
    > > > > Ok, lets take a step back. The bisect/kexec attempts led us away from the
    > > > > initial problem which is the machine locking up after login, right?
    > > > >
    > > >
    > > > Yes; sorry about that..
    > >
    > > Nothing to be sorry about.
    > >
    > > > x86/vector: Replace the raw_spin_lock() with
    > > >
    > > > diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c
    > > > index 7504491..e5bab02 100644
    > > > --- a/arch/x86/kernel/apic/vector.c
    > > > +++ b/arch/x86/kernel/apic/vector.c
    > > > @@ -726,6 +726,7 @@ static int apic_set_affinity(struct irq_data *irqd,
    > > > const struct cpumask *dest, bool force)
    > > > {
    > > > struct apic_chip_data *apicd = apic_chip_data(irqd);
    > > > + unsigned long flags;
    > > > int err;
    > > >
    > > > /*
    > > > @@ -740,13 +741,13 @@ static int apic_set_affinity(struct irq_data *irqd,
    > > > (apicd->is_managed || apicd->can_reserve))
    > > > return IRQ_SET_MASK_OK;
    > > >
    > > > - raw_spin_lock(&vector_lock);
    > > > + raw_spin_lock_irqsave(&vector_lock, flags);
    > > > cpumask_and(vector_searchmask, dest, cpu_online_mask);
    > > > if (irqd_affinity_is_managed(irqd))
    > > > err = assign_managed_vector(irqd, vector_searchmask);
    > > > else
    > > > err = assign_vector_locked(irqd, vector_searchmask);
    > > > - raw_spin_unlock(&vector_lock);
    > > > + raw_spin_unlock_irqrestore(&vector_lock, flags);
    > > > return err ? err : IRQ_SET_MASK_OK;
    > > > }
    > > >
    > > > With this, I still get the lockup messages after login, but not the
    > > > freezes!
    > >
    > > That's really interesting. There should be no code path which calls into
    > > that with interrupts enabled. I assume you never ran that kernel with
    > > CONFIG_PROVE_LOCKING=y.
    > >
    >
    > Correct. That option is not set in .config.
    >
    > > Find below a debug patch which should show us the call chain for that
    > > case. Please apply that on top of Dou's patch so the machine stays
    > > accessible. Plain output from dmesg is sufficient.
    > >
    > > > The lockups register in the log, which I am attaching (see below for
    > > > attachment naming conventions).
    > >
    > > Hmm. That's RCU lockups and that backtrace on the CPU which gets the stall
    > > looks very familiar. I'd like to see the above result first and then I'll
    > > send you another pile of patches which might cure that RCU issue.
    > >
    > > Thanks,
    > >
    > > tglx
    > >
    > > 8<-------------------
    > > --- a/arch/x86/kernel/apic/vector.c
    > > +++ b/arch/x86/kernel/apic/vector.c
    > > @@ -729,6 +729,8 @@ static int apic_set_affinity(struct irq_
    > > unsigned long flags;
    > > int err;
    > >
    > > + WARN_ON_ONCE(!irqs_disabled());
    > > +
    > > /*
    > > * Core code can call here for inactive interrupts. For inactive
    > > * interrupts which use managed or reservation mode there is no
    > >
    > >
    > >
    >
    > Bit of a step back here: the kernel treated with Dou's patch no longer
    > logs me in reliably as before, with or without this newest patch on
    > top..
    >
    > So now I sometimes get immediate lockups and freezes upon trying to
    > log in, and other times I get logged in but get a freeze seconds
    > later.
    >
    > In no case can I roam around long nough to get a dmesg, and I no
    > longer get the non-freezing lockups from before. I can't imagine what
    > I could possibly have changed..
    >
    > Here's the output of `git log --pretty=oneline -5` on the branch I'm
    > working in.
    >
    > --------------------
    >
    > f2c02af5cc1d620c039b21fab0ca5948a06daf90 2nd tglx patch
    > 7715575170bacf3566d400b9f2210a10ce152880 x86/vector: Replace the raw_spin_lock() with raw_spin_lock_irqsave()
    > 8d9d56caf33d78bfe6b6087767b1b84acee58458 x86-32: fix kexec with stack canary (CONFIG_CC_STACKPROTECTOR)
    > a197e9dea4ccb72e1a6457fac15329bd5319e719 irq/matrix: Remove the overused BUGON() in irq_matrix_assign_system()
    > 464e1d5f23cca236b930ef068c328a64cab78fb1 Linux 4.15-rc5
    >
    > --------------------
    >
    > 7715575170bacf3566d400b9f2210a10ce152880, which is the kernel with
    > Dou's patch, logged me in and allowed me to produce the dmesg from
    > before. I did this a couple of times back then. I no longer can, for
    > some reason, as it's reverted back to the no-go lockups from before.
    >
    > And the next one, f2c02af5cc1d620c039b21fab0ca5948a06daf90, where I
    > applied the patch you just sent, behaves identically.
    >
    >

    Actually, it decided to cooperate for just long enough for me to get
    the dmesg out. Attached.

    This is from the kernel you asked about: Dou's patch + yours, i.e. the
    latest one in that git log I just sent, booted up with 'apic=debug'.
    [ 0.000000] Linux version 4.15.0-rc5-dou-thms-p2+ (root@axiomatic) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5)) #1 SMP Thu Dec 28 10:06:24 EST 2017
    [ 0.000000] x86/fpu: x87 FPU will use FXSAVE
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7f9ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7fa0000-0x00000000b7fadfff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000b7fae000-0x00000000b7feffff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000b7ff0000-0x00000000b7ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] random: fast init done
    [ 0.000000] SMBIOS 2.4 present.
    [ 0.000000] DMI: ASUSTeK Computer Inc. F5RL /F5RL , BIOS 210 06/12/2008
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0xb7fa0 max_arch_pfn = 0x1000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FE0000000 write-back
    [ 0.000000] 2 base 0A0000000 mask FF0000000 write-back
    [ 0.000000] 3 base 0B0000000 mask FF8000000 write-back
    [ 0.000000] 4 base 0B8000000 mask FFC000000 write-back
    [ 0.000000] 5 base 0BC000000 mask FFF000000 write-back
    [ 0.000000] 6 base 0C0000000 mask FF0000000 write-combining
    [ 0.000000] 7 disabled
    [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
    [ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
    [ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
    [ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
    [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [(ptrval)]
    [ 0.000000] mpc: fd2d0-fd434
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x16dfffff]
    [ 0.000000] Base memory trampoline at [(ptrval)] 9b000 size 16384
    [ 0.000000] BRK [0x169ee000, 0x169eefff] PGTABLE
    [ 0.000000] BRK [0x169ef000, 0x169f0fff] PGTABLE
    [ 0.000000] BRK [0x169f1000, 0x169f1fff] PGTABLE
    [ 0.000000] BRK [0x169f2000, 0x169f2fff] PGTABLE
    [ 0.000000] RAMDISK: [mem 0x35d37000-0x36e92fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F8070 000014 (v00 ACPIAM)
    [ 0.000000] ACPI: RSDT 0x00000000B7FA0000 00003C (v01 A_M_I_ OEMRSDT 06000812 MSFT 00000097)
    [ 0.000000] ACPI: FACP 0x00000000B7FA0200 000084 (v02 A_M_I_ OEMFACP 06000812 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 0x00000000B7FA0630 0075FA (v01 A0669 A0669000 00000000 INTL 20060113)
    [ 0.000000] ACPI: FACS 0x00000000B7FAE000 000040
    [ 0.000000] ACPI: APIC 0x00000000B7FA0390 00005C (v01 A_M_I_ OEMAPIC 06000812 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 0x00000000B7FA03F0 00003C (v01 A_M_I_ OEMMCFG 06000812 MSFT 00000097)
    [ 0.000000] ACPI: SLIC 0x00000000B7FA0430 000176 (v01 A_M_I_ OEMSLIC 06000812 MSFT 00000097)
    [ 0.000000] ACPI: BOOT 0x00000000B7FA0600 000028 (v01 A_M_I_ OEMBOOT 06000812 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 0x00000000B7FAE040 00005B (v01 A_M_I_ AMI_OEM 06000812 MSFT 00000097)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] mapped APIC to ffffc000 ( fee00000)
    [ 0.000000] 2057MB HIGHMEM available.
    [ 0.000000] 885MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 375fe000
    [ 0.000000] low ram: 0 - 375fe000
    [ 0.000000] Reserving 256MB of memory at 96MB for crashkernel (System RAM: 2943MB)
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] BRK [0x169f3000, 0x169f3fff] PGTABLE
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
    [ 0.000000] Normal [mem 0x0000000001000000-0x00000000375fdfff]
    [ 0.000000] HighMem [mem 0x00000000375fe000-0x00000000b7f9ffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
    [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b7f9ffff]
    [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000b7f9ffff]
    [ 0.000000] On node 0 totalpages: 753470
    [ 0.000000] DMA zone: 36 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1958 pages used for memmap
    [ 0.000000] Normal zone: 222718 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 526754 pages, LIFO batch:31
    [ 0.000000] Reserved but unavailable: 98 pages
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e
    [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] mapped IOAPIC to ffffb000 (fec00000)
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] e820: [mem 0xb8000000-0xfedfffff] available for PCI devices
    [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
    [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] percpu: Embedded 24 pages/cpu @(ptrval) s65612 r0 d32692 u98304
    [ 0.000000] pcpu-alloc: s65612 r0 d32692 u98304 alloc=24*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 751476
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-rc5-dou-thms-p2+ root=UUID=5a437cd2-c27b-4829-a7ba-533eb741b148 ro 3 crashkernel=256M quiet apic=debug
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] microcode: microcode updated early to revision 0xa4, date = 2010-10-02
    [ 0.000000] Initializing CPU#0
    [ 0.000000] Initializing HighMem for node 0 (000375fe:000b7fa0)
    [ 0.000000] Initializing Movable for node 0 (00000000:00000000)
    [ 0.000000] Memory: 2696228K/3013880K available (5865K kernel code, 593K rwdata, 1836K rodata, 604K init, 428K bss, 317652K reserved, 0K cma-reserved, 2107016K highmem)
    [ 0.000000] virtual kernel memory layout:
    fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
    cpu_entry : 0xff800000 - 0xff8c1000 ( 772 kB)
    pkmap : 0xff600000 - 0xff800000 (2048 kB)
    vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
    .init : 0xd682e000 - 0xd68c5000 ( 604 kB)
    .data : 0xd65ba464 - 0xd6820780 (2456 kB)
    .text : 0xd6000000 - 0xd65ba464 (5865 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [ 0.000000] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16
    [ 0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] ACPI: Core revision 20170831
    [ 0.000000] ACPI: 1 ACPI AML tables successfully acquired and loaded
    [ 0.000000] APIC: Switch to symmetric I/O mode setup
    [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.000000] enabled ExtINT on CPU#0
    [ 0.000000] ESR value before enabling vector: 0x00000040 after: 0x00000000
    [ 0.000000] ENABLING IO-APIC IRQs
    [ 0.000000] init IO_APIC IRQs
    [ 0.000000] apic 2 pin 0 not connected
    [ 0.000000] IOAPIC[0]: Set routing entry (2-1 -> 0xef -> IRQ 1 Mode:0 Active:0 Dest:1)
    [ 0.000000] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
    [ 0.000000] IOAPIC[0]: Set routing entry (2-3 -> 0xef -> IRQ 3 Mode:0 Active:0 Dest:1)
    [ 0.000000] IOAPIC[0]: Set routing entry (2-4 -> 0xef -> IRQ 4 Mode:0 Active:0 Dest:1)
    [ 0.000000] IOAPIC[0]: Set routing entry (2-5 -> 0xef -> IRQ 5 Mode:0 Active:0 Dest:1)
    [ 0.000000] IOAPIC[0]: Set routing entry (2-6 -> 0xef -> IRQ 6 Mode:0 Active:0 Dest:1)
    [ 0.000000] IOAPIC[0]: Set routing entry (2-7 -> 0xef -> IRQ 7 Mode:0 Active:0 Dest:1)
    [ 0.000000] IOAPIC[0]: Set routing entry (2-8 -> 0xef -> IRQ 8 Mode:0 Active:0 Dest:1)
    [ 0.000000] IOAPIC[0]: Set routing entry (2-9 -> 0xef -> IRQ 9 Mode:1 Active:1 Dest:1)
    [ 0.000000] IOAPIC[0]: Set routing entry (2-10 -> 0xef -> IRQ 10 Mode:0 Active:0 Dest:1)
    [ 0.000000] IOAPIC[0]: Set routing entry (2-11 -> 0xef -> IRQ 11 Mode:0 Active:0 Dest:1)
    [ 0.000000] IOAPIC[0]: Set routing entry (2-12 -> 0xef -> IRQ 12 Mode:0 Active:0 Dest:1)
    [ 0.000000] IOAPIC[0]: Set routing entry (2-13 -> 0xef -> IRQ 13 Mode:0 Active:0 Dest:1)
    [ 0.000000] IOAPIC[0]: Set routing entry (2-14 -> 0xef -> IRQ 14 Mode:0 Active:0 Dest:1)
    [ 0.000000] IOAPIC[0]: Set routing entry (2-15 -> 0xef -> IRQ 15 Mode:0 Active:0 Dest:1)
    [ 0.000000] apic 2 pin 16 not connected
    [ 0.000000] apic 2 pin 17 not connected
    [ 0.000000] apic 2 pin 18 not connected
    [ 0.000000] apic 2 pin 19 not connected
    [ 0.000000] apic 2 pin 20 not connected
    [ 0.000000] apic 2 pin 21 not connected
    [ 0.000000] apic 2 pin 22 not connected
    [ 0.000000] apic 2 pin 23 not connected
    [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.020000] tsc: Fast TSC calibration using PIT
    [ 0.024000] tsc: Detected 1662.592 MHz processor
    [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.18 BogoMIPS (lpj=6650368)
    [ 0.024000] pid_max: default: 32768 minimum: 301
    [ 0.024000] Security Framework initialized
    [ 0.024000] Yama: becoming mindful.
    [ 0.024000] AppArmor: AppArmor disabled by boot time parameter
    [ 0.024000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.024000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
    [ 0.024000] CPU: Physical Processor ID: 0
    [ 0.024000] CPU: Processor Core ID: 0
    [ 0.024000] mce: CPU supports 6 MCE banks
    [ 0.024000] process: using mwait in idle threads
    [ 0.024000] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    [ 0.024000] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
    [ 0.024000] Freeing SMP alternatives memory: 24K
    [ 0.028181] Using local APIC timer interrupts.
    calibrating APIC timer ...
    [ 0.032000] ... lapic delta = 1039124
    [ 0.032000] ... PM-Timer delta = 357975
    [ 0.032000] ... PM-Timer result ok
    [ 0.032000] ..... delta 1039124
    [ 0.032000] ..... mult: 44630035
    [ 0.032000] ..... calibration result: 665039
    [ 0.032000] ..... CPU clock speed is 1662.2390 MHz.
    [ 0.032000] ..... host bus clock speed is 166.1039 MHz.
    [ 0.032000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz (family: 0x6, model: 0xf, stepping: 0xd)
    [ 0.032000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.032000] core: PEBS disabled due to CPU errata
    [ 0.032000] ... version: 2
    [ 0.032000] ... bit width: 40
    [ 0.032000] ... generic registers: 2
    [ 0.032000] ... value mask: 000000ffffffffff
    [ 0.032000] ... max period: 000000007fffffff
    [ 0.032000] ... fixed-purpose events: 3
    [ 0.032000] ... event mask: 0000000700000003
    [ 0.032000] Hierarchical SRCU implementation.
    [ 0.032000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
    [ 0.032000] smp: Bringing up secondary CPUs ...
    [ 0.032000] CPU 1 irqstacks, hard=25bf07ed soft=e308ee92
    [ 0.032000] x86: Booting SMP configuration:
    [ 0.032000] .... node #0, CPUs: #1
    [ 0.004000] Initializing CPU#1
    [ 0.004000] masked ExtINT on CPU#1
    [ 0.032128] smp: Brought up 1 node, 2 CPUs
    [ 0.032128] smpboot: Max logical packages: 1
    [ 0.032128] smpboot: Total of 2 processors activated (6650.36 BogoMIPS)
    [ 0.033772] devtmpfs: initialized
    [ 0.033772] PM: Registering ACPI NVS region [mem 0xb7fae000-0xb7feffff] (270336 bytes)
    [ 0.033772] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
    [ 0.033772] futex hash table entries: 512 (order: 3, 32768 bytes)
    [ 0.033772] pinctrl core: initialized pinctrl subsystem
    [ 0.033772] NET: Registered protocol family 16
    [ 0.033772] audit: initializing netlink subsys (disabled)
    [ 0.036019] audit: type=2000 audit(1514476480.036:1): state=initialized audit_enabled=0 res=1
    [ 0.036177] cpuidle: using governor ladder
    [ 0.036177] cpuidle: using governor menu
    [ 0.036177] Simple Boot Flag at 0xff set to 0x1
    [ 0.036177] ACPI: bus type PCI registered
    [ 0.036177] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.036213] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.036217] PCI: not using MMCONFIG
    [ 0.036363] PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
    [ 0.036457] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=8
    [ 0.036458] PCI: Using configuration type 1 for base access
    [ 0.036650] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.036651] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.036652] mtrr: corrected configuration.
    [ 0.038085] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
    [ 0.038085] ACPI: Added _OSI(Module Device)
    [ 0.038085] ACPI: Added _OSI(Processor Device)
    [ 0.038085] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.038085] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.038085] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.048008] ACPI: Dynamic OEM Table Load:
    [ 0.048008] ACPI: SSDT 0x00000000F7175000 000C99 (v01 AMI CPU1PM 00000001 INTL 20060113)
    [ 0.048008] ACPI: Dynamic OEM Table Load:
    [ 0.048008] ACPI: SSDT 0x00000000F7178000 000C99 (v01 AMI CPU2PM 00000001 INTL 20060113)
    [ 0.048008] ACPI: EC: EC started
    [ 0.048008] ACPI: EC: interrupt blocked
    [ 0.048008] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
    [ 0.048008] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
    [ 0.048008] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
    [ 0.048008] ACPI: Interpreter enabled
    [ 0.048008] ACPI: (supports S0 S3 S4 S5)
    [ 0.048008] ACPI: Using IOAPIC for interrupt routing
    [ 0.048008] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.048008] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.048008] PCI: Using MMCONFIG for extended config space
    [ 0.048008] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.052274] ACPI: Enabled 6 GPEs in block 00 to 1F
    [ 0.062880] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.062888] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.062895] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    [ 0.063315] PCI host bridge to bus 0000:00
    [ 0.063319] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
    [ 0.063322] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
    [ 0.063324] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
    [ 0.063327] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
    [ 0.063329] pci_bus 0000:00: root bus resource [mem 0xb8000000-0xffffffff window]
    [ 0.063332] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.063347] pci 0000:00:00.0: [1002:5a31] type 00 class 0x060000
    [ 0.063515] pci 0000:00:01.0: [1002:5a3f] type 01 class 0x060400
    [ 0.063694] pci 0000:00:04.0: [1002:5a36] type 01 class 0x060400
    [ 0.063728] pci 0000:00:04.0: enabling Extended Tags
    [ 0.063770] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    [ 0.063920] pci 0000:00:05.0: [1002:5a37] type 01 class 0x060400
    [ 0.063954] pci 0000:00:05.0: enabling Extended Tags
    [ 0.063994] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    [ 0.064147] pci 0000:00:06.0: [1002:5a38] type 01 class 0x060400
    [ 0.064181] pci 0000:00:06.0: enabling Extended Tags
    [ 0.064221] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
    [ 0.064366] pci 0000:00:07.0: [1002:5a39] type 01 class 0x060400
    [ 0.064395] pci 0000:00:07.0: enabling Extended Tags
    [ 0.064436] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    [ 0.064605] pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f
    [ 0.064639] pci 0000:00:12.0: reg 0x10: [io 0xe800-0xe807]
    [ 0.064654] pci 0000:00:12.0: reg 0x14: [io 0xe400-0xe403]
    [ 0.064668] pci 0000:00:12.0: reg 0x18: [io 0xe000-0xe007]
    [ 0.064683] pci 0000:00:12.0: reg 0x1c: [io 0xdc00-0xdc03]
    [ 0.064697] pci 0000:00:12.0: reg 0x20: [io 0xd800-0xd80f]
    [ 0.064712] pci 0000:00:12.0: reg 0x24: [mem 0xfebffc00-0xfebfffff]
    [ 0.064747] pci 0000:00:12.0: set SATA to AHCI mode
    [ 0.064918] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310
    [ 0.064946] pci 0000:00:13.0: reg 0x10: [mem 0xfebfe000-0xfebfefff]
    [ 0.065172] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310
    [ 0.065200] pci 0000:00:13.1: reg 0x10: [mem 0xfebfd000-0xfebfdfff]
    [ 0.065424] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310
    [ 0.065452] pci 0000:00:13.2: reg 0x10: [mem 0xfebfc000-0xfebfcfff]
    [ 0.065679] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310
    [ 0.065707] pci 0000:00:13.3: reg 0x10: [mem 0xfebfb000-0xfebfbfff]
    [ 0.065933] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310
    [ 0.065961] pci 0000:00:13.4: reg 0x10: [mem 0xfebfa000-0xfebfafff]
    [ 0.066196] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320
    [ 0.066229] pci 0000:00:13.5: reg 0x10: [mem 0xfebff800-0xfebff8ff]
    [ 0.066355] pci 0000:00:13.5: supports D1 D2
    [ 0.066358] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
    [ 0.066502] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    [ 0.066537] pci 0000:00:14.0: reg 0x10: [io 0x0b00-0x0b0f]
    [ 0.066752] pci 0000:00:14.1: [1002:438c] type 00 class 0x010182
    [ 0.066780] pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
    [ 0.066794] pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
    [ 0.066809] pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
    [ 0.066823] pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
    [ 0.066837] pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
    [ 0.066868] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
    [ 0.066870] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
    [ 0.066873] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
    [ 0.066875] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
    [ 0.067015] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    [ 0.067054] pci 0000:00:14.2: reg 0x10: [mem 0xfebf4000-0xfebf7fff 64bit]
    [ 0.067160] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.067300] pci 0000:00:14.3: [1002:438d] type 00 class 0x060100
    [ 0.067537] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    [ 0.067823] pci 0000:01:05.0: [1002:5a62] type 00 class 0x030000
    [ 0.067840] pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
    [ 0.067848] pci 0000:01:05.0: reg 0x14: [io 0x9800-0x98ff]
    [ 0.067856] pci 0000:01:05.0: reg 0x18: [mem 0xfa8f0000-0xfa8fffff]
    [ 0.067880] pci 0000:01:05.0: reg 0x30: [mem 0xfa8c0000-0xfa8dffff pref]
    [ 0.067912] pci 0000:01:05.0: supports D1 D2
    [ 0.067997] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.068007] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
    [ 0.068011] pci 0000:00:01.0: bridge window [mem 0xfa800000-0xfa8fffff]
    [ 0.068014] pci 0000:00:01.0: bridge window [mem 0xbdf00000-0xddefffff pref]
    [ 0.068108] pci 0000:02:00.0: [168c:001c] type 00 class 0x020000
    [ 0.068148] pci 0000:02:00.0: reg 0x10: [mem 0xfa9f0000-0xfa9fffff 64bit]
    [ 0.068396] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.068408] pci 0000:00:04.0: PCI bridge to [bus 02]
    [ 0.068415] pci 0000:00:04.0: bridge window [mem 0xfa900000-0xfa9fffff]
    [ 0.068523] acpiphp: Slot [1] registered
    [ 0.068529] pci 0000:00:05.0: PCI bridge to [bus 03-05]
    [ 0.068535] pci 0000:00:05.0: bridge window [io 0xa000-0xbfff]
    [ 0.068539] pci 0000:00:05.0: bridge window [mem 0xfaa00000-0xfe9fffff]
    [ 0.068545] pci 0000:00:05.0: bridge window [mem 0xddf00000-0xdfefffff 64bit pref]
    [ 0.068621] pci 0000:06:00.0: [1969:2048] type 00 class 0x020000
    [ 0.068660] pci 0000:06:00.0: reg 0x10: [mem 0xfeac0000-0xfeafffff 64bit]
    [ 0.068722] pci 0000:06:00.0: reg 0x30: [mem 0xfeaa0000-0xfeabffff pref]
    [ 0.068803] pci 0000:06:00.0: PME# supported from D3hot D3cold
    [ 0.068890] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.068900] pci 0000:00:06.0: PCI bridge to [bus 06]
    [ 0.068908] pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.068966] pci 0000:00:07.0: PCI bridge to [bus 07]
    [ 0.069092] pci 0000:00:14.4: PCI bridge to [bus 08] (subtractive decode)
    [ 0.069105] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
    [ 0.069108] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
    [ 0.069110] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
    [ 0.069113] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
    [ 0.069115] pci 0000:00:14.4: bridge window [mem 0xb8000000-0xffffffff window] (subtractive decode)
    [ 0.069146] pci_bus 0000:00: on NUMA node 0
    [ 0.069888] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12)
    [ 0.069977] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12)
    [ 0.070063] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 12)
    [ 0.070148] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12)
    [ 0.070234] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12) *0, disabled.
    [ 0.070321] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12) *0, disabled.
    [ 0.070407] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12)
    [ 0.070493] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12) *0, disabled.
    [ 0.070823] ACPI: EC: interrupt unblocked
    [ 0.070832] ACPI: EC: event unblocked
    [ 0.070841] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
    [ 0.070844] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
    [ 0.070947] pci 0000:01:05.0: vgaarb: setting as boot VGA device
    [ 0.070947] pci 0000:01:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
    [ 0.070947] pci 0000:01:05.0: vgaarb: bridge control possible
    [ 0.070947] vgaarb: loaded
    [ 0.070947] EDAC MC: Ver: 3.0.0
    [ 0.072081] PCI: Using ACPI for IRQ routing
    [ 0.072143] PCI: pci_cache_line_size set to 64 bytes
    [ 0.072223] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    [ 0.072226] e820: reserve RAM buffer [mem 0xb7fa0000-0xb7ffffff]
    [ 0.072454] clocksource: Switched to clocksource refined-jiffies
    [ 0.095197] VFS: Disk quotas dquot_6.6.0
    [ 0.095264] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.095492] pnp: PnP ACPI init
    [ 0.095817] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.096281] system 00:01: [io 0x04d0-0x04d1] has been reserved
    [ 0.096284] system 00:01: [io 0x040b] has been reserved
    [ 0.096289] system 00:01: [io 0x04d6] has been reserved
    [ 0.096292] system 00:01: [io 0x0c00-0x0c01] has been reserved
    [ 0.096294] system 00:01: [io 0x0c14] has been reserved
    [ 0.096297] system 00:01: [io 0x0c50-0x0c51] has been reserved
    [ 0.096300] system 00:01: [io 0x0c52] has been reserved
    [ 0.096302] system 00:01: [io 0x0c6c] has been reserved
    [ 0.096305] system 00:01: [io 0x0c6f] has been reserved
    [ 0.096307] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.096311] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.096313] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
    [ 0.096316] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
    [ 0.096319] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
    [ 0.096323] system 00:01: [io 0x0800-0x089f] has been reserved
    [ 0.096327] system 00:01: [io 0x0b00-0x0b1f] could not be reserved
    [ 0.096329] system 00:01: [io 0x0900-0x090f] has been reserved
    [ 0.096332] system 00:01: [io 0x0910-0x091f] has been reserved
    [ 0.096335] system 00:01: [io 0xfe00-0xfefe] has been reserved
    [ 0.096338] system 00:01: [io 0x4000-0x40fe] has been reserved
    [ 0.096344] system 00:01: [mem 0xfed45000-0xfed89fff] has been reserved
    [ 0.096347] system 00:01: [mem 0xffb80000-0xffbfffff] has been reserved
    [ 0.096350] system 00:01: [mem 0xfff80000-0xffffffff] has been reserved
    [ 0.096359] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.096442] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.096553] pnp 00:03: Plug and Play ACPI device, IDs SYN0a04 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
    [ 0.096691] system 00:04: [io 0x0250-0x0253] has been reserved
    [ 0.096694] system 00:04: [io 0x0256-0x025f] has been reserved
    [ 0.096697] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.096700] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.096707] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.096896] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.096904] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.097333] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.097337] system 00:06: [mem 0x000c0000-0x000cffff] could not be reserved
    [ 0.097340] system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.097343] system 00:06: [mem 0x00100000-0xb7ffffff] could not be reserved
    [ 0.097350] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.097535] pnp: PnP ACPI: found 7 devices
    [ 0.097544] PnPBIOS: Disabled
    [ 0.134932] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
    [ 0.134963] clocksource: Switched to clocksource acpi_pm
    [ 0.135027] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.135032] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
    [ 0.135037] pci 0000:00:01.0: bridge window [mem 0xfa800000-0xfa8fffff]
    [ 0.135040] pci 0000:00:01.0: bridge window [mem 0xbdf00000-0xddefffff pref]
    [ 0.135046] pci 0000:00:04.0: PCI bridge to [bus 02]
    [ 0.135050] pci 0000:00:04.0: bridge window [mem 0xfa900000-0xfa9fffff]
    [ 0.135057] pci 0000:00:05.0: PCI bridge to [bus 03-05]
    [ 0.135060] pci 0000:00:05.0: bridge window [io 0xa000-0xbfff]
    [ 0.135064] pci 0000:00:05.0: bridge window [mem 0xfaa00000-0xfe9fffff]
    [ 0.135068] pci 0000:00:05.0: bridge window [mem 0xddf00000-0xdfefffff 64bit pref]
    [ 0.135073] pci 0000:00:06.0: PCI bridge to [bus 06]
    [ 0.135077] pci 0000:00:06.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.135084] pci 0000:00:07.0: PCI bridge to [bus 07]
    [ 0.135093] pci 0000:00:14.4: PCI bridge to [bus 08]
    [ 0.135112] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
    [ 0.135115] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
    [ 0.135117] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
    [ 0.135119] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
    [ 0.135122] pci_bus 0000:00: resource 8 [mem 0xb8000000-0xffffffff window]
    [ 0.135124] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
    [ 0.135127] pci_bus 0000:01: resource 1 [mem 0xfa800000-0xfa8fffff]
    [ 0.135129] pci_bus 0000:01: resource 2 [mem 0xbdf00000-0xddefffff pref]
    [ 0.135132] pci_bus 0000:02: resource 1 [mem 0xfa900000-0xfa9fffff]
    [ 0.135134] pci_bus 0000:03: resource 0 [io 0xa000-0xbfff]
    [ 0.135136] pci_bus 0000:03: resource 1 [mem 0xfaa00000-0xfe9fffff]
    [ 0.135138] pci_bus 0000:03: resource 2 [mem 0xddf00000-0xdfefffff 64bit pref]
    [ 0.135141] pci_bus 0000:06: resource 1 [mem 0xfea00000-0xfeafffff]
    [ 0.135144] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window]
    [ 0.135146] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window]
    [ 0.135149] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window]
    [ 0.135151] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff window]
    [ 0.135153] pci_bus 0000:08: resource 8 [mem 0xb8000000-0xffffffff window]
    [ 0.135289] NET: Registered protocol family 2
    [ 0.135648] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [ 0.135709] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.135820] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.135950] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.135983] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.135983] NET: Registered protocol family 1
    [ 0.135983] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
    [ 0.135983] IOAPIC[0]: Set routing entry (2-16 -> 0xef -> IRQ 16 Mode:1 Active:1 Dest:1)
    [ 0.135983] IOAPIC[0]: Set routing entry (2-17 -> 0xef -> IRQ 17 Mode:1 Active:1 Dest:1)
    [ 0.135983] IOAPIC[0]: Set routing entry (2-18 -> 0xef -> IRQ 18 Mode:1 Active:1 Dest:1)
    [ 0.135983] IOAPIC[0]: Set routing entry (2-17 -> 0xef -> IRQ 17 Mode:1 Active:1 Dest:1)
    [ 0.135983] IOAPIC[0]: Set routing entry (2-18 -> 0xef -> IRQ 18 Mode:1 Active:1 Dest:1)
    [ 0.135983] IOAPIC[0]: Set routing entry (2-19 -> 0xef -> IRQ 19 Mode:1 Active:1 Dest:1)
    [ 0.135983] pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
    [ 0.135983] pci 0000:06:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
    [ 0.135983] PCI: CLS 64 bytes, default 64
    [ 0.135983] Unpacking initramfs...
    [ 0.736192] Freeing initrd memory: 17776K
    [ 0.737930] Initialise system trusted keyrings
    [ 0.738091] workingset: timestamp_bits=14 max_order=20 bucket_order=6
    [ 0.738149] zbud: loaded
    [ 1.760144] tsc: Refined TSC clocksource calibration: 1662.500 MHz
    [ 1.760163] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17f6c6790c8, max_idle_ns: 440795235729 ns
    [ 2.784299] clocksource: Switched to clocksource tsc
    [ 2.860929] Key type asymmetric registered
    [ 2.860932] Asymmetric key parser 'x509' registered
    [ 2.860952] bounce: pool size: 64 pages
    [ 2.860979] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
    [ 2.861034] io scheduler noop registered
    [ 2.861035] io scheduler deadline registered
    [ 2.861065] io scheduler cfq registered (default)
    [ 2.861067] io scheduler mq-deadline registered
    [ 2.861068] io scheduler kyber registered
    [ 2.861495] intel_idle: does not run on family 6 model 15
    [ 2.861729] tsc: Marking TSC unstable due to TSC halts in idle
    [ 2.861851] clocksource: Switched to clocksource acpi_pm
    [ 2.862239] isapnp: Scanning for PnP cards...
    [ 3.216719] isapnp: No Plug & Play device found
    [ 3.216848] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [ 3.217619] Linux agpgart interface v0.103
    [ 3.218173] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 3.220828] i8042: Detected active multiplexing controller, rev 1.1
    [ 3.222268] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 3.222276] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 3.222335] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 3.222380] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 3.222431] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 3.222666] mousedev: PS/2 mouse device common for all mice
    [ 3.222757] rtc_cmos 00:00: RTC can wake from S4
    [ 3.222945] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
    [ 3.222973] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram
    [ 3.223032] ledtrig-cpu: registered to indicate activity on CPUs
    [ 3.223578] NET: Registered protocol family 10
    [ 3.223988] Segment Routing with IPv6
    [ 3.224044] mip6: Mobile IPv6
    [ 3.224047] NET: Registered protocol family 17
    [ 3.224052] mpls_gso: MPLS GSO support
    [ 3.224337] microcode: sig=0x6fd, pf=0x80, revision=0xa4
    [ 3.224437] microcode: Microcode Update Driver: v2.2.
    [ 3.224461] ... APIC ID: 00000000 (0)
    [ 3.224462] ... APIC VERSION: 00050014
    [ 3.224464] 0000000000000000000000000000000000000000000000000000000000000000
    [ 3.224471] 0000000000000000000000000000000000000000000000000000000000000000
    [ 3.224477] 0000000000000000000000000000000000000000000000000000000000000000
    [ 3.224484] number of MP IRQ sources: 15.
    [ 3.224486] number of IO-APIC #2 registers: 24.
    [ 3.224487] testing the IO APIC.......................
    [ 3.224494] IO APIC #2......
    [ 3.224495] .... register #00: 02000000
    [ 3.224496] ....... : physical APIC id: 02
    [ 3.224497] ....... : Delivery Type: 0
    [ 3.224498] ....... : LTS : 0
    [ 3.224499] .... register #01: 00178021
    [ 3.224500] ....... : max redirection entries: 17
    [ 3.224501] ....... : PRQ implemented: 1
    [ 3.224502] ....... : IO APIC version: 21
    [ 3.224503] .... register #02: 02000000
    [ 3.224504] ....... : arbitration: 02
    [ 3.224505] .... register #03: 02178021
    [ 3.224506] ....... : Boot DT : 1
    [ 3.224507] .... IRQ redirection table:
    [ 3.224508] IOAPIC 0:
    [ 3.224515] pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224520] pin01, enabled , edge , high, V(23), IRR(0), S(0), logical , D(01), M(1)
    [ 3.224526] pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1)
    [ 3.224531] pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224537] pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224542] pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224547] pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224553] pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224558] pin08, enabled , edge , high, V(24), IRR(0), S(0), logical , D(01), M(1)
    [ 3.224563] pin09, enabled , level, low , V(21), IRR(0), S(0), logical , D(01), M(1)
    [ 3.224569] pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224574] pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224580] pin0c, enabled , edge , high, V(22), IRR(0), S(0), logical , D(01), M(1)
    [ 3.224585] pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224590] pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224596] pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224601] pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224606] pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224612] pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224617] pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224623] pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224628] pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224633] pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224638] pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
    [ 3.224639] IRQ to pin mappings:
    [ 3.224641] IRQ0 -> 0:2
    [ 3.224644] IRQ1 -> 0:1
    [ 3.224647] IRQ3 -> 0:3
    [ 3.224649] IRQ4 -> 0:4
    [ 3.224652] IRQ5 -> 0:5
    [ 3.224655] IRQ6 -> 0:6
    [ 3.224657] IRQ7 -> 0:7
    [ 3.224659] IRQ8 -> 0:8
    [ 3.224661] IRQ9 -> 0:9
    [ 3.224664] IRQ10 -> 0:10
    [ 3.224666] IRQ11 -> 0:11
    [ 3.224669] IRQ12 -> 0:12
    [ 3.224671] IRQ13 -> 0:13
    [ 3.224674] IRQ14 -> 0:14
    [ 3.224676] IRQ15 -> 0:15
    [ 3.224679] .................................... done.
    [ 3.224680] Using IPI No-Shortcut mode
    [ 3.224962] registered taskstats version 1
    [ 3.224963] Loading compiled-in X.509 certificates
    [ 3.224986] zswap: loaded using pool lzo/zbud
    [ 3.225136] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
    [ 3.225587] rtc_cmos 00:00: setting system clock to 2017-12-28 15:54:43 UTC (1514476483)
    [ 3.226331] Freeing unused kernel memory: 604K
    [ 3.226440] Write protecting the kernel text: 5868k
    [ 3.226544] Write protecting the kernel read-only data: 1860k
    [ 3.226545] NX-protecting the kernel data: 4372k
    [ 3.226699] ------------[ cut here ]------------
    [ 3.226706] x86/mm: Found insecure W+X mapping at address c16f461c/0xc00a0000
    [ 3.226723] WARNING: CPU: 0 PID: 1 at arch/x86/mm/dump_pagetables.c:257 note_page+0x5ec/0x790
    [ 3.226724] Modules linked in:
    [ 3.226729] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc5-dou-thms-p2+ #1
    [ 3.226784] Hardware name: ASUSTeK Computer Inc. F5RL /F5RL , BIOS 210 06/12/2008
    [ 3.226833] EIP: note_page+0x5ec/0x790
    [ 3.226834] EFLAGS: 00210282 CPU: 0
    [ 3.226836] EAX: 00000041 EBX: f70c7f54 ECX: 00000001 EDX: d68de544
    [ 3.226837] ESI: 80000000 EDI: 00000000 EBP: f70c7f20 ESP: f70c7ef4
    [ 3.226839] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
    [ 3.226841] CR0: 80050033 CR2: ff9ff000 CR3: 168ce000 CR4: 000006f0
    [ 3.226842] Call Trace:
    [ 3.226891] ptdump_walk_pgd_level_core+0x15c/0x240
    [ 3.226938] ptdump_walk_pgd_level_checkwx+0x11/0x20
    [ 3.226983] mark_rodata_ro+0xd5/0xf1
    [ 3.227030] ? rest_init+0x90/0x90
    [ 3.227074] kernel_init+0x24/0xe0
    [ 3.227119] ret_from_fork+0x19/0x24
    [ 3.227163] Code: fa ff ff 83 c2 0c c7 43 18 00 00 00 00 89 53 14 e9 1a fd ff ff 8b 43 0c c6 05 c4 76 80 d6 01 50 50 68 50 ee 6c d6 e8 84 5c 00 00 <0f> ff 83 c4 0c e9 6f fa ff ff ff 72 10 68 1c ed 6c d6 e8 57 f5
    [ 3.227260] ---[ end trace 90f1997524bd5f15 ]---
    [ 3.227367] x86/mm: Checked W+X mappings: FAILED, 96 W+X pages found.
    [ 3.258107] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 3.318212] Atheros(R) L2 Ethernet Driver - version 2.2.3
    [ 3.318219] Copyright (c) 2007 Atheros Corporation.
    [ 3.318631] IOAPIC[0]: Set routing entry (2-18 -> 0xef -> IRQ 18 Mode:1 Active:1 Dest:1)
    [ 3.320519] SCSI subsystem initialized
    [ 3.324534] ACPI: bus type USB registered
    [ 3.324610] usbcore: registered new interface driver usbfs
    [ 3.324628] usbcore: registered new interface driver hub
    [ 3.324681] usbcore: registered new device driver usb
    [ 3.326226] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 3.326953] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 3.327247] ehci-pci: EHCI PCI platform driver
    [ 3.327470] IOAPIC[0]: Set routing entry (2-19 -> 0xef -> IRQ 19 Mode:1 Active:1 Dest:1)
    [ 3.327532] ehci-pci 0000:00:13.5: EHCI Host Controller
    [ 3.327544] ehci-pci 0000:00:13.5: new USB bus registered, assigned bus number 1
    [ 3.327554] ehci-pci 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
    [ 3.327583] ehci-pci 0000:00:13.5: debug port 1
    [ 3.327681] ehci-pci 0000:00:13.5: irq 19, io mem 0xfebff800
    [ 3.328429] libata version 3.00 loaded.
    [ 3.340123] ehci-pci 0000:00:13.5: USB 2.0 started, EHCI 1.00
    [ 3.340259] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [ 3.340262] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.340264] usb usb1: Product: EHCI Host Controller
    [ 3.340266] usb usb1: Manufacturer: Linux 4.15.0-rc5-dou-thms-p2+ ehci_hcd
    [ 3.340268] usb usb1: SerialNumber: 0000:00:13.5
    [ 3.340492] hub 1-0:1.0: USB hub found
    [ 3.340505] hub 1-0:1.0: 10 ports detected
    [ 3.340933] ahci 0000:00:12.0: version 3.0
    [ 3.341142] IOAPIC[0]: Set routing entry (2-22 -> 0xef -> IRQ 22 Mode:1 Active:1 Dest:1)
    [ 3.341208] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
    [ 3.341377] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [ 3.341380] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio slum part ccc
    [ 3.341381] ohci-pci: OHCI PCI platform driver
    [ 3.343207] scsi host0: ahci
    [ 3.352079] scsi host1: ahci
    [ 3.352339] scsi host2: ahci
    [ 3.360050] scsi host3: ahci
    [ 3.360165] ata1: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 22
    [ 3.360169] ata2: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd80 irq 22
    [ 3.360172] ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe00 irq 22
    [ 3.360175] ata4: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe80 irq 22
    [ 3.360289] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SMB0) (20170831/utaddress-247)
    [ 3.360300] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 3.360563] IOAPIC[0]: Set routing entry (2-16 -> 0xef -> IRQ 16 Mode:1 Active:1 Dest:1)
    [ 3.366253] scsi host4: pata_atiixp
    [ 3.379884] scsi host5: pata_atiixp
    [ 3.380055] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
    [ 3.380057] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
    [ 3.380415] ohci-pci 0000:00:13.0: OHCI PCI host controller
    [ 3.380435] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
    [ 3.380487] ohci-pci 0000:00:13.0: irq 16, io mem 0xfebfe000
    [ 3.417837] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
    [ 3.418800] thermal LNXTHERM:00: registered as thermal_zone0
    [ 3.418803] ACPI: Thermal Zone [THRM] (77 C)
    [ 3.444153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    [ 3.444156] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.444158] usb usb2: Product: OHCI PCI host controller
    [ 3.444160] usb usb2: Manufacturer: Linux 4.15.0-rc5-dou-thms-p2+ ohci_hcd
    [ 3.444162] usb usb2: SerialNumber: 0000:00:13.0
    [ 3.444393] hub 2-0:1.0: USB hub found
    [ 3.444408] hub 2-0:1.0: 2 ports detected
    [ 3.444731] IOAPIC[0]: Set routing entry (2-17 -> 0xef -> IRQ 17 Mode:1 Active:1 Dest:1)
    [ 3.444768] ohci-pci 0000:00:13.1: OHCI PCI host controller
    [ 3.444777] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 3
    [ 3.444820] ohci-pci 0000:00:13.1: irq 17, io mem 0xfebfd000
    [ 3.508158] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    [ 3.508161] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.508163] usb usb3: Product: OHCI PCI host controller
    [ 3.508165] usb usb3: Manufacturer: Linux 4.15.0-rc5-dou-thms-p2+ ohci_hcd
    [ 3.508167] usb usb3: SerialNumber: 0000:00:13.1
    [ 3.508394] hub 3-0:1.0: USB hub found
    [ 3.508407] hub 3-0:1.0: 2 ports detected
    [ 3.508723] ohci-pci 0000:00:13.2: OHCI PCI host controller
    [ 3.508732] ohci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
    [ 3.508781] ohci-pci 0000:00:13.2: irq 18, io mem 0xfebfc000
    [ 3.560675] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JR03, max UDMA/33
    [ 3.573319] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    [ 3.573322] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.573325] usb usb4: Product: OHCI PCI host controller
    [ 3.573327] usb usb4: Manufacturer: Linux 4.15.0-rc5-dou-thms-p2+ ohci_hcd
    [ 3.573328] usb usb4: SerialNumber: 0000:00:13.2
    [ 3.573546] hub 4-0:1.0: USB hub found
    [ 3.573560] hub 4-0:1.0: 2 ports detected
    [ 3.573824] ohci-pci 0000:00:13.3: OHCI PCI host controller
    [ 3.573833] ohci-pci 0000:00:13.3: new USB bus registered, assigned bus number 5
    [ 3.573860] ohci-pci 0000:00:13.3: irq 17, io mem 0xfebfb000
    [ 3.588514] ata5.00: configured for UDMA/33
    [ 3.636125] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [ 3.636128] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.636130] usb usb5: Product: OHCI PCI host controller
    [ 3.636132] usb usb5: Manufacturer: Linux 4.15.0-rc5-dou-thms-p2+ ohci_hcd
    [ 3.636134] usb usb5: SerialNumber: 0000:00:13.3
    [ 3.636343] hub 5-0:1.0: USB hub found
    [ 3.636357] hub 5-0:1.0: 2 ports detected
    [ 3.636629] ohci-pci 0000:00:13.4: OHCI PCI host controller
    [ 3.636639] ohci-pci 0000:00:13.4: new USB bus registered, assigned bus number 6
    [ 3.636666] ohci-pci 0000:00:13.4: irq 18, io mem 0xfebfa000
    [ 3.676057] usb 1-4: new high-speed USB device number 2 using ehci-pci
    [ 3.679169] ata3: SATA link down (SStatus 0 SControl 300)
    [ 3.679205] ata4: SATA link down (SStatus 0 SControl 300)
    [ 3.679243] ata2: SATA link down (SStatus 0 SControl 300)
    [ 3.700133] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    [ 3.700136] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 3.700138] usb usb6: Product: OHCI PCI host controller
    [ 3.700140] usb usb6: Manufacturer: Linux 4.15.0-rc5-dou-thms-p2+ ohci_hcd
    [ 3.700142] usb usb6: SerialNumber: 0000:00:13.4
    [ 3.700353] hub 6-0:1.0: USB hub found
    [ 3.700366] hub 6-0:1.0: 2 ports detected
    [ 3.836093] ata1: softreset failed (device not ready)
    [ 3.836147] ata1: applying PMP SRST workaround and retrying
    [ 3.852671] usb 1-4: New USB device found, idVendor=0bda, idProduct=0116
    [ 3.852674] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 3.852676] usb 1-4: Product: USB2.0-CRW
    [ 3.852678] usb 1-4: Manufacturer: Generic
    [ 3.852680] usb 1-4: SerialNumber: 20021111153705700
    [ 3.858380] usb-storage 1-4:1.0: USB Mass Storage device detected
    [ 3.858824] scsi host6: usb-storage 1-4:1.0
    [ 3.858960] usbcore: registered new interface driver usb-storage
    [ 3.859620] usbcore: registered new interface driver uas
    [ 3.984057] usb 1-7: new high-speed USB device number 3 using ehci-pci
    [ 3.996101] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 3.996578] ata1.00: ATA-8: ST9250827AS, 3.AAA, max UDMA/133
    [ 3.996581] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 3.996585] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 3.997056] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 3.997058] ata1.00: configured for UDMA/133
    [ 3.997378] scsi 0:0:0:0: Direct-Access ATA ST9250827AS A PQ: 0 ANSI: 5
    [ 4.001647] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T40N JR03 PQ: 0 ANSI: 5
    [ 4.019009] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
    [ 4.019035] sd 0:0:0:0: [sda] Write Protect is off
    [ 4.019038] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 4.019072] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 4.039588] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 4.039590] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 4.040108] sr 4:0:0:0: Attached scsi CD-ROM sr0
    [ 4.097489] sda: sda1 sda2 < sda5 >
    [ 4.098242] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 4.162719] usb 1-7: New USB device found, idVendor=174f, idProduct=5a31
    [ 4.162724] usb 1-7: New USB device strings: Mfr=2, Product=1, SerialNumber=3
    [ 4.162727] usb 1-7: Product: USB 2.0 Camera
    [ 4.162729] usb 1-7: Manufacturer: Sonix Technology Co., Ltd.
    [ 4.162731] usb 1-7: SerialNumber: SN0001
    [ 4.222215] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0/0x0, board id: 0, fw id: 30712
    [ 4.263765] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
    [ 4.757443] PM: Starting manual resume from disk
    [ 4.757679] PM: Image not found (code -22)
    [ 4.871750] scsi 6:0:0:0: Direct-Access Generic- xD/SDMMC/MS/Pro 1.00 PQ: 0 ANSI: 0 CCS
    [ 5.386287] sd 6:0:0:0: [sdb] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
    [ 5.390272] sd 6:0:0:0: [sdb] Write Protect is off
    [ 5.390275] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
    [ 5.394270] sd 6:0:0:0: [sdb] No Caching mode page found
    [ 5.394320] sd 6:0:0:0: [sdb] Assuming drive cache: write through
    [ 5.416916] sdb: sdb1
    [ 5.432407] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [ 5.702605] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 6.320080] random: crng init done
    [ 7.512048] ip_tables: (C) 2000-2006 Netfilter Core Team
    [ 7.712917] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
    [ 7.732158] systemd[1]: Detected architecture x86.
    [ 7.746203] systemd[1]: Set hostname to <D-69-91-141-110>.
    [ 9.114242] systemd[1]: Configuration file /etc/systemd/system/kdump.service is marked executable. Please remove executable permission bits. Proceeding anyway.
    [ 9.249731] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 9.249942] systemd[1]: Listening on Journal Audit Socket.
    [ 9.250045] systemd[1]: Listening on Journal Socket.
    [ 9.250124] systemd[1]: Listening on udev Kernel Socket.
    [ 9.250162] systemd[1]: Reached target Remote File Systems.
    [ 9.250238] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 10.233568] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
    [ 10.460990] systemd-journald[186]: Received request to flush runtime journal from PID 1
    [ 10.814415] systemd-journald[186]: File /var/log/journal/232ecae4e62643e0ac09bafad7167a6f/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 15.120812] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 15.354243] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 15.358192] acpi device:02: registered as cooling_device2
    [ 15.358286] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input9
    [ 15.360809] ACPI: Battery Slot [BAT0] (battery absent)
    [ 15.366165] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input10
    [ 15.366184] ACPI: Lid Switch [LID]
    [ 15.366338] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input11
    [ 15.366366] ACPI: Power Button [PWRB]
    [ 15.366448] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input12
    [ 15.366466] ACPI: Sleep Button [SLPB]
    [ 15.366555] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input13
    [ 15.366572] ACPI: Power Button [PWRF]
    [ 15.805367] cfg80211: Loading compiled-in X.509 certificates for regulatory database
    [ 16.075198] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
    [ 16.120563] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
    [ 16.120566] cfg80211: failed to load regulatory.db
    [ 16.549660] ath5k 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 16.549871] ath5k 0000:02:00.0: registered as 'phy0'
    [ 16.559842] ACPI: AC Adapter [AC0] (on-line)
    [ 16.592437] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
    [ 16.592547] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x13
    [ 16.592577] sp5100_tco: failed to find MMIO address, giving up.
    [ 16.636328] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 16.636400] sr 4:0:0:0: Attached scsi generic sg1 type 5
    [ 16.636463] sd 6:0:0:0: Attached scsi generic sg2 type 0
    [ 16.710725] [drm] radeon kernel modesetting enabled.
    [ 16.711378] [drm] initializing kernel modesetting (RS400 0x1002:0x5A62 0x1043:0x1402 0x00).
    [ 16.711449] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
    [ 16.711460] caller pci_map_rom+0x58/0xf0 mapping multiple BARs
    [ 16.711629] [drm] Generation 2 PCI interface, using max accessible memory
    [ 16.711635] radeon 0000:01:05.0: VRAM: 128M 0x00000000B8000000 - 0x00000000BFFFFFFF (128M used)
    [ 16.711638] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
    [ 16.711651] [drm] Detected VRAM RAM=128M, BAR=256M
    [ 16.711652] [drm] RAM width 128bits DDR
    [ 16.711778] [TTM] Zone kernel: Available graphics memory: 303808 kiB
    [ 16.711779] [TTM] Zone highmem: Available graphics memory: 1357316 kiB
    [ 16.711781] [TTM] Initializing pool allocator
    [ 16.711789] [TTM] Initializing DMA pool allocator
    [ 16.711835] [drm] radeon: 128M of VRAM memory ready
    [ 16.711837] [drm] radeon: 512M of GTT memory ready.
    [ 16.711856] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 16.734181] [drm] radeon: 3 quad pipes, 1 z pipes initialized.
    [ 16.734199] [drm] PCIE GART of 512M enabled (table at 0x0000000036580000).
    [ 16.734310] radeon 0000:01:05.0: WB enabled
    [ 16.734317] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x0000000080000000 and cpu addr 0x59b9d544
    [ 16.734323] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 16.734324] [drm] Driver supports precise vblank timestamp query.
    [ 16.734327] radeon 0000:01:05.0: radeon: MSI limited to 32-bit
    [ 16.734354] [drm] radeon: irq initialized.
    [ 16.734368] [drm] Loading R300 Microcode
    [ 16.874141] [drm] radeon: ring at 0x0000000080001000
    [ 16.874170] [drm] ring test succeeded in 0 usecs
    [ 16.874330] [drm] ib test succeeded in 0 usecs
    [ 16.874726] [drm] Panel ID String: AUO
    [ 16.874728] [drm] Panel Size 1280x800
    [ 16.874816] [drm] Radeon Display Connectors
    [ 16.874817] [drm] Connector 0:
    [ 16.874818] [drm] VGA-1
    [ 16.874821] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
    [ 16.874822] [drm] Encoders:
    [ 16.874823] [drm] CRT1: INTERNAL_DAC2
    [ 16.874824] [drm] Connector 1:
    [ 16.874825] [drm] LVDS-1
    [ 16.874827] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
    [ 16.874828] [drm] Encoders:
    [ 16.874829] [drm] LCD1: INTERNAL_LVDS
    [ 16.944628] [drm] fb mappable at 0xC0040000
    [ 16.944630] [drm] vram apper at 0xC0000000
    [ 16.944631] [drm] size 4096000
    [ 16.944632] [drm] fb depth is 24
    [ 16.944633] [drm] pitch is 5120
    [ 16.944776] fbcon: radeondrmfb (fb0) is primary device
    [ 16.991113] Console: switching to colour frame buffer device 160x50
    [ 16.999330] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
    [ 17.010704] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:05.0 on minor 0
    [ 17.138694] ath: EEPROM regdomain: 0x60
    [ 17.138698] ath: EEPROM indicates we should expect a direct regpair map
    [ 17.138702] ath: Country alpha2 being used: 00
    [ 17.138703] ath: Regpair used: 0x60
    [ 17.314154] asus_laptop: Asus Laptop Support version 0.42
    [ 17.314310] asus_laptop: F5RL model detected
    [ 17.314625] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input14
    [ 17.375159] input: PC Speaker as /devices/platform/pcspkr/input/input15
    [ 17.457671] intel_powerclamp: No package C-state available
    [ 17.488471] intel_powerclamp: No package C-state available
    [ 17.502095] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 17.502596] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
    [ 18.862371] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC660-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 18.862376] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 18.862379] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
    [ 18.862381] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
    [ 18.862382] snd_hda_codec_realtek hdaudioC0D0: inputs:
    [ 18.862386] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
    [ 18.862388] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
    [ 19.125186] media: Linux media interface: v0.10
    [ 19.137851] Linux video capture interface: v2.00
    [ 19.221028] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (174f:5a31)
    [ 19.240622] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
    [ 19.240627] uvcvideo 1-7:1.0: Entity type for entity Processing 3 was not initialized!
    [ 19.240629] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
    [ 19.240779] input: USB 2.0 Camera: USB 2.0 Camera as /devices/pci0000:00/0000:00:13.5/usb1/1-7/1-7:1.0/input/input19
    [ 19.240911] usbcore: registered new interface driver uvcvideo
    [ 19.240913] USB Video Class driver (1.1.1)
    [ 19.409794] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
    [ 19.410438] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
    [ 19.410545] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
    [ 20.218900] Adding 3929084k swap on /dev/sda5. Priority:-2 extents:1 across:3929084k FS
    [ 20.722335] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    [ 30.756833] NET: Registered protocol family 4
    [ 30.800318] NET: Registered protocol family 3
    [ 30.847827] NET: Registered protocol family 5
    [ 30.969398] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 36.017942] spurious APIC interrupt through vector ff on CPU#0, should never happen.
    [ 36.018215] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 38.345348] NMI watchdog: Watchdog detected hard LOCKUP on cpu 0
    [ 38.345348] Modules linked in: appletalk ax25 ipx p8023 p8022 psnap llc nls_ascii nls_cp437 vfat fat snd_hda_codec_si3054 uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev media snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core arc4 snd_hwdep snd_pcsp coretemp asus_laptop snd_pcm snd_timer evdev sparse_keymap joydev serio_raw input_polldev snd soundcore radeon sg sp5100_tco ac ath5k ath mac80211 ttm drm_kms_helper drm cfg80211 i2c_algo_bit fb_sys_fops rfkill syscopyarea sysfillrect sysimgblt button battery video shpchp acpi_cpufreq ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 fscrypto sr_mod cdrom sd_mod ata_generic uas usb_storage psmouse ohci_pci pata_atiixp i2c_piix4 ahci libahci ehci_pci ohci_hcd libata ehci_hcd usbcore
    [ 38.345348] scsi_mod atl2 thermal
    [ 38.345348] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 4.15.0-rc5-dou-thms-p2+ #1
    [ 38.345348] Hardware name: ASUSTeK Computer Inc. F5RL /F5RL , BIOS 210 06/12/2008
    [ 38.345348] EIP: tick_check_broadcast_expired+0x16/0x20
    [ 38.345348] EFLAGS: 00000247 CPU: 0
    [ 38.345348] EAX: 00000001 EBX: d6792180 ECX: d68bbf28 EDX: 0002ac3a
    [ 38.345348] ESI: d6792180 EDI: 00000000 EBP: d678df24 ESP: d678df24
    [ 38.345348] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
    [ 38.345348] CR0: 80050033 CR2: b7f05500 CR3: 36f2ec80 CR4: 000006f0
    [ 38.345348] Call Trace:
    [ 38.345348] cpu_idle_poll+0x46/0x130
    [ 38.345348] do_idle+0x3d/0x1a0
    [ 38.345348] cpu_startup_entry+0x65/0x70
    [ 38.345348] rest_init+0x86/0x90
    [ 38.345348] start_kernel+0x371/0x38a
    [ 38.345348] i386_start_kernel+0x95/0x99
    [ 38.345348] startup_32_smp+0x164/0x168
    [ 38.345348] Code: c3 8d 74 26 00 55 b8 60 26 90 d6 89 e5 5d c3 8d b6 00 00 00 00 55 64 a1 00 61 8b d6 89 e5 0f a3 05 58 26 90 d6 0f 92 c0 0f b6 c0 <5d> c3 90 8d b4 26 00 00 00 00 64 a1 00 61 8b d6 0f a3 05 60 26
    [ 38.345348] NMI watchdog: Watchdog detected hard LOCKUP on cpu 1
    [ 38.345348] Modules linked in: appletalk ax25 ipx p8023 p8022 psnap llc nls_ascii nls_cp437 vfat fat snd_hda_codec_si3054 uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev media snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core arc4 snd_hwdep snd_pcsp coretemp asus_laptop snd_pcm snd_timer evdev sparse_keymap joydev serio_raw input_polldev snd soundcore radeon sg sp5100_tco ac ath5k ath mac80211 ttm drm_kms_helper drm cfg80211 i2c_algo_bit fb_sys_fops rfkill syscopyarea sysfillrect sysimgblt button battery video shpchp acpi_cpufreq ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 fscrypto sr_mod cdrom sd_mod ata_generic uas usb_storage psmouse ohci_pci pata_atiixp i2c_piix4 ahci libahci ehci_pci ohci_hcd libata ehci_hcd usbcore
    [ 38.345348] scsi_mod atl2 thermal
    [ 38.345348] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 4.15.0-rc5-dou-thms-p2+ #1
    [ 38.345348] Hardware name: ASUSTeK Computer Inc. F5RL /F5RL , BIOS 210 06/12/2008
    [ 38.345348] EIP: cpu_idle_poll+0x32/0x130
    [ 38.345348] EFLAGS: 00000202 CPU: 1
    [ 38.345348] EAX: 00000001 EBX: f70dea80 ECX: d68bbf28 EDX: 00021396
    [ 38.345348] ESI: f70dea80 EDI: 00000001 EBP: f70e5f30 ESP: f70e5f24
    [ 38.345348] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
    [ 38.345348] CR0: 80050033 CR2: 08e487e0 CR3: 320041a0 CR4: 000006f0
    [ 38.345348] Call Trace:
    [ 38.345348] do_idle+0x3d/0x1a0
    [ 38.345348] cpu_startup_entry+0x65/0x70
    [ 38.345348] start_secondary+0x16b/0x210
    [ 38.345348] startup_32_smp+0x164/0x168
    [ 38.345348] ? startup_32_smp+0x164/0x168
    [ 38.345348] Code: a5 09 b0 ff 64 8b 3d 00 61 8b d6 66 66 66 66 90 fb 64 8b 1d 3c 79 8b d6 8b 03 a8 08 74 13 eb 23 89 f6 8d bc 27 00 00 00 00 f3 90 <8b> 03 a8 08 75 12 a1 10 c5 81 d6 85 c0 75 ef e8 aa 73 b1 ff 85
    \
     
     \ /
      Last update: 2017-12-28 17:04    [W:8.155 / U:0.032 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site