lkml.org 
[lkml]   [2017]   [Dec]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v6 3/4] iio : Add cm3218 smbus ara and acpi support
Date
On Monday, December 25, 2017 4:57:22 PM CET Marc CAPDEVILLE wrote:
> On asus T100, Capella cm3218 chip is implemented as ambiant light
> sensor. This chip expose an smbus ARA protocol device on standard
> address 0x0c. The chip is not functional before all alerts are
> acknowledged.
> On asus T100, this device is enumerated on ACPI bus and the description
> give two I2C connection. The first is the connection to the ARA device
> and the second gives the real address of the device.
>
> So, on device probe,If the i2c address is the ARA address and the
> device is enumerated via acpi, we change address of the device for
> the one in the second acpi serial bus connection.
> This free the ara address so we can register with the smbus_alert
> driver.
>
> If an interrupt resource is given, and a smbus_alert device was
> found on the adapter, we request a treaded interrupt to
> call i2c_smbus_alert_event to handle the alert.
>
> In somme case, the treaded interrupt is not schedule before the driver
> try to initialize chip registers. So if first registers access fail, we
> call i2c_smbus_alert_event() to acknowledge initial alert, then retry
> register access.
>
> Signed-off-by: Marc CAPDEVILLE <m.capdeville@no-log.org>
> ---
> drivers/iio/light/cm32181.c | 120 ++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 115 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c
> index aebf7dd071af..96c08755e6e3 100644
> --- a/drivers/iio/light/cm32181.c
> +++ b/drivers/iio/light/cm32181.c
> @@ -18,6 +18,9 @@
> #include <linux/iio/sysfs.h>
> #include <linux/iio/events.h>
> #include <linux/init.h>
> +#include <linux/i2c-smbus.h>
> +#include <linux/acpi.h>
> +#include <linux/of_device.h>
>
> /* Registers Address */
> #define CM32181_REG_ADDR_CMD 0x00
> @@ -47,6 +50,11 @@
> #define CM32181_CALIBSCALE_RESOLUTION 1000
> #define MLUX_PER_LUX 1000
>
> +#define CM32181_ID 0x81
> +#define CM3218_ID 0x18
> +
> +#define SMBUS_ARA_ADDR 0x0c
> +
> static const u8 cm32181_reg[CM32181_CONF_REG_NUM] = {
> CM32181_REG_ADDR_CMD,
> };
> @@ -57,6 +65,7 @@ static const int als_it_value[] = {25000, 50000, 100000, 200000, 400000,
>
> struct cm32181_chip {
> struct i2c_client *client;
> + int chip_id;
> struct mutex lock;
> u16 conf_regs[CM32181_CONF_REG_NUM];
> int calibscale;
> @@ -77,11 +86,22 @@ static int cm32181_reg_init(struct cm32181_chip *cm32181)
> s32 ret;
>
> ret = i2c_smbus_read_word_data(client, CM32181_REG_ADDR_ID);
> - if (ret < 0)
> - return ret;
> + if (ret < 0) {
> + if (cm32181->chip_id == CM3218_ID) {
> + /*
> + * On cm3218, smbus alert trigger after probing,
> + * so poll for first alert here, then retry.
> + */
> + i2c_smbus_alert_event(client);
> + ret = i2c_smbus_read_word_data(client,
> + CM32181_REG_ADDR_ID);
> + } else {
> + return ret;
> + }
> + }
>
> /* check device ID */
> - if ((ret & 0xFF) != 0x81)
> + if ((ret & 0xFF) != cm32181->chip_id)
> return -ENODEV;
>
> /* Default Values */
> @@ -297,12 +317,36 @@ static const struct iio_info cm32181_info = {
> .attrs = &cm32181_attribute_group,
> };
>
> +static void cm3218_alert(struct i2c_client *client,
> + enum i2c_alert_protocol type,
> + unsigned int data)
> +{
> + /*
> + * nothing to do for now.
> + * This is just here to acknownledge the cm3218 alert.
> + */
> +}
> +
> +static irqreturn_t cm32181_irq(int irq, void *d)
> +{
> + struct cm32181_chip *cm32181 = d;
> +
> + if (cm32181->chip_id == CM3218_ID) {
> + /* This is cm3218 chip irq, so handle the smbus alert */
> + i2c_smbus_alert_event(cm32181->client);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> static int cm32181_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> struct cm32181_chip *cm32181;
> struct iio_dev *indio_dev;
> int ret;
> + const struct of_device_id *of_id;
> + const struct acpi_device_id *acpi_id;
>
> indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*cm32181));
> if (!indio_dev) {
> @@ -322,6 +366,61 @@ static int cm32181_probe(struct i2c_client *client,
> indio_dev->name = id->name;
> indio_dev->modes = INDIO_DIRECT_MODE;
>
> + /* Lookup for chip ID from platform, acpi or of device table */
> + if (id) {
> + cm32181->chip_id = id->driver_data;
> + } else if (ACPI_COMPANION(&client->dev)) {
> + acpi_id = acpi_match_device(client->dev.driver->acpi_match_table,
> + &client->dev);
> + if (!acpi_id)
> + return -ENODEV;
> +
> + cm32181->chip_id = (kernel_ulong_t)acpi_id->driver_data;
> + } else if (client->dev.of_node) {
> + of_id = of_match_device(client->dev.driver->of_match_table,
> + &client->dev);
> + if (!of_id)
> + return -ENODEV;
> +
> + cm32181->chip_id = (kernel_ulong_t)of_id->data;
> + } else {
> + return -ENODEV;
> + }
> +
> + if (cm32181->chip_id == CM3218_ID) {
> + if (ACPI_COMPANION(&client->dev) &&
> + client->addr == SMBUS_ARA_ADDR) {
> + /*
> + * In case this device as been enumerated by acpi
> + * with the reserved smbus ARA address (first acpi
> + * connection), request change of address to the second
> + * connection.
> + */
> + ret = i2c_acpi_set_connection(client, 1);
> + if (ret)
> + return ret;

This looks super-fragile to me.

What about making the enumeration aware of the SMBUS_ARA thing and avoid
using resources corresponding to that at all?

BTW, in comments and similar always spell ACPI in capitals.

Thanks,
Rafael

\
 
 \ /
  Last update: 2017-12-28 02:21    [W:0.082 / U:1.036 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site