lkml.org 
[lkml]   [2017]   [Dec]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/4] phy: usb: phy-brcm-usb-init: Power down USB 3.0 PHY when XHCI disabled
Date
From: Al Cooper <al.cooper@broadcom.com>

Set PHY3_IDDQ_OVERRIDE in the xhci uninit routine. This will save
additional power when the XHCI driver is not enabled.

Fixes: 49859e55e364 ("phy: usb: phy-brcm-usb: Add Broadcom STB USB phy driver")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
---
drivers/phy/broadcom/phy-brcm-usb-init.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c
index 69ea479..6672adcc 100644
--- a/drivers/phy/broadcom/phy-brcm-usb-init.c
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
@@ -73,6 +73,7 @@
#define USB_CTRL_USB30_CTL1_USB3_IPP_MASK 0x20000000 /* option */
#define USB_CTRL_USB30_PCTL 0x70
#define USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_MASK 0x00000002
+#define USB_CTRL_USB30_PCTL_PHY3_IDDQ_OVERRIDE_MASK 0x00008000
#define USB_CTRL_USB30_PCTL_PHY3_SOFT_RESETB_P1_MASK 0x00020000
#define USB_CTRL_USB_DEVICE_CTL1 0x90
#define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK 0x00000003 /* option */
@@ -998,6 +999,7 @@ void brcm_usb_uninit_eohci(struct brcm_usb_init_params *params)
void brcm_usb_uninit_xhci(struct brcm_usb_init_params *params)
{
brcmusb_xhci_soft_reset(params, 1);
+ USB_CTRL_SET(params->ctrl_regs, USB30_PCTL, PHY3_IDDQ_OVERRIDE);
}

void brcm_usb_set_family_map(struct brcm_usb_init_params *params)
--
1.9.0.138.g2de3478
\
 
 \ /
  Last update: 2017-12-27 20:30    [W:0.088 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site