lkml.org 
[lkml]   [2017]   [Dec]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 8/9] ufs: sysfs: flags
On Wed, Dec 27, 2017 at 05:13:46PM +0200, Stanislav Nijnikov wrote:
> This patch introduces a sysfs group entry for the UFS flags. The group adds
> "flags" folder under the UFS driver sysfs entry
> (/sys/bus/platform/drivers/ufshcd/*). The flags are shown as boolean value
> ("true" or "false"). The full information about the UFS flags could be
> found at UFS specifications 2.1.
>
> Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
> ---
> Documentation/ABI/testing/sysfs-driver-ufs | 65 ++++++++++++++++++++++++++++++
> drivers/scsi/ufs/ufs-sysfs.c | 42 +++++++++++++++++++
> drivers/scsi/ufs/ufs.h | 14 +++++--
> drivers/scsi/ufs/ufshcd.c | 1 +
> 4 files changed, 119 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
> index 5ff8dfa..832da97 100644
> --- a/Documentation/ABI/testing/sysfs-driver-ufs
> +++ b/Documentation/ABI/testing/sysfs-driver-ufs
> @@ -597,4 +597,69 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
> Description: This file shows the granularity of the LUN. This is one of
> the UFS unit descriptor parameters. The full information
> about the descriptor could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/flags/device_init
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
> +Description: This file shows the device init status. The full information
> + about the flag could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/flags/permanent_wpe
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
> +Description: This file shows whether permanent write protection is enabled.
> + The full information about the flag could be found at
> + UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/flags/power_on_wpe
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
> +Description: This file shows whether write protection is enabled on all
> + logical units configured as power on write protected. The
> + full information about the flag could be found at
> + UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/flags/bkops_enable
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
> +Description: This file shows whether the device background operations are
> + enabled. The full information about the flag could be
> + found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/flags/life_span_mode_enable
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
> +Description: This file shows whether the device life span mode is enabled.
> + The full information about the flag could be found at
> + UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/flags/phy_resource_removal
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
> +Description: This file shows whether physical resource removal is enable.
> + The full information about the flag could be found at
> + UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/flags/busy_rtc
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
> +Description: This file shows whether the device is executing internal
> + operation related to real time clock. The full information
> + about the flag could be found at UFS specifications 2.1.
> + The file is read only.
> +
> +What: /sys/bus/platform/drivers/ufshcd/*/flags/disable_fw_update
> +Date: August 2017
> +Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
> +Description: This file shows whether the device FW update is permanently
> + disabled. The full information about the flag could be found
> + at UFS specifications 2.1.
> The file is read only.
> \ No newline at end of file
> diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
> index 509abc9..de80c20 100644
> --- a/drivers/scsi/ufs/ufs-sysfs.c
> +++ b/drivers/scsi/ufs/ufs-sysfs.c
> @@ -427,6 +427,47 @@ static const struct attribute_group ufs_sysfs_string_descriptors_group = {
> .attrs = ufs_sysfs_string_descriptors,
> };
>
> +#define ufs_sysfs_flag_show(_name, _uname) \
> +static ssize_t _name##_show(struct device *dev, \
> + struct device_attribute *attr, char *buf) \
> +{ \
> + bool flag; \
> + struct ufs_hba *hba = dev_get_drvdata(dev); \
> + if (ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_READ_FLAG, \
> + QUERY_FLAG_IDN_##_uname, &flag)) \
> + return -EINVAL; \
> + return sprintf(buf, "%s\n", flag ? "true" : "false"); \
> +}
> +
> +#define UFS_FLAG(_name, _uname) \
> + ufs_sysfs_flag_show(_name, _uname) \
> + static DEVICE_ATTR_RO(_name)
> +
> +UFS_FLAG(device_init, FDEVICEINIT);
> +UFS_FLAG(permanent_wpe, PERMANENT_WPE);
> +UFS_FLAG(power_on_wpe, PWR_ON_WPE);
> +UFS_FLAG(bkops_enable, BKOPS_EN);
> +UFS_FLAG(life_span_mode_enable, LIFE_SPAN_MODE_ENABLE);
> +UFS_FLAG(phy_resource_removal, FPHYRESOURCEREMOVAL);
> +UFS_FLAG(busy_rtc, BUSY_RTC);
> +UFS_FLAG(disable_fw_update, PERMANENTLY_DISABLE_FW_UPDATE);
> +
> +static struct attribute *ufs_sysfs_device_flags[] = {
> + &dev_attr_device_init.attr,
> + &dev_attr_permanent_wpe.attr,
> + &dev_attr_power_on_wpe.attr,
> + &dev_attr_bkops_enable.attr,
> + &dev_attr_life_span_mode_enable.attr,
> + &dev_attr_phy_resource_removal.attr,
> + &dev_attr_busy_rtc.attr,
> + &dev_attr_disable_fw_update.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group ufs_sysfs_flags_group = {
> + .name = "flags",
> + .attrs = ufs_sysfs_device_flags,
> +};
>
> static const struct attribute_group *ufs_sysfs_groups[] = {
> &ufs_sysfs_device_descriptor_group,
> @@ -435,6 +476,7 @@ static const struct attribute_group *ufs_sysfs_groups[] = {
> &ufs_sysfs_health_descriptor_group,
> &ufs_sysfs_power_descriptor_group,
> &ufs_sysfs_string_descriptors_group,
> + &ufs_sysfs_flags_group,
> NULL,
> };
>
> diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
> index 7387059..df5e73e 100644
> --- a/drivers/scsi/ufs/ufs.h
> +++ b/drivers/scsi/ufs/ufs.h
> @@ -130,9 +130,17 @@ enum {
>
> /* Flag idn for Query Requests*/
> enum flag_idn {
> - QUERY_FLAG_IDN_FDEVICEINIT = 0x01,
> - QUERY_FLAG_IDN_PWR_ON_WPE = 0x03,
> - QUERY_FLAG_IDN_BKOPS_EN = 0x04,
> + QUERY_FLAG_IDN_FDEVICEINIT = 0x01,
> + QUERY_FLAG_IDN_PERMANENT_WPE = 0x02,
> + QUERY_FLAG_IDN_PWR_ON_WPE = 0x03,
> + QUERY_FLAG_IDN_BKOPS_EN = 0x04,
> + QUERY_FLAG_IDN_LIFE_SPAN_MODE_ENABLE = 0x05,
> + QUERY_FLAG_IDN_PURGE_ENABLE = 0x06,
> + QUERY_FLAG_IDN_RESERVED2 = 0x07,
> + QUERY_FLAG_IDN_FPHYRESOURCEREMOVAL = 0x08,
> + QUERY_FLAG_IDN_BUSY_RTC = 0x09,
> + QUERY_FLAG_IDN_RESERVED3 = 0x0A,
> + QUERY_FLAG_IDN_PERMANENTLY_DISABLE_FW_UPDATE = 0x0B,
> };
>
> /* Attribute idn for Query requests */
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 0fb89a6..72e5b9a 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -2699,6 +2699,7 @@ int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode,
> ufshcd_release(hba);
> return err;
> }
> +EXPORT_SYMBOL(ufshcd_query_flag);

Does this really need to be exported? Isn't this all in the same
module?

thanks,

greg k-h

\
 
 \ /
  Last update: 2017-12-27 16:30    [W:0.043 / U:0.016 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site