lkml.org 
[lkml]   [2017]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 05/12] watchdog: sp5100_tco: Clean up sp5100_tco_setupdevice
Date
There are too many unnecessary goto statements in sp5100_tco_setupdevice().
Rearrange the code and limit goto statements to error handling.

Cc: Zoltán Böszörményi <zboszor@pr.hu>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/watchdog/sp5100_tco.c | 62 ++++++++++++++++++++-----------------------
1 file changed, 29 insertions(+), 33 deletions(-)

diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
index 0e816f2cdb07..5a13ab483c50 100644
--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -396,48 +396,44 @@ static int sp5100_tco_setupdevice(void)
pr_debug("Got 0x%04x from indirect I/O\n", val);

/* Check MMIO address conflict */
- if (request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
- dev_name))
- goto setup_wdt;
- else
+ if (!request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
+ dev_name)) {
pr_debug("MMIO address 0x%04x already in use\n", val);
+ /*
+ * Secondly, Find the watchdog timer MMIO address
+ * from SBResource_MMIO register.
+ */
+ if (tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
+ /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
+ pci_read_config_dword(sp5100_tco_pci,
+ SP5100_SB_RESOURCE_MMIO_BASE,
+ &val);
+ } else {
+ /* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
+ val = sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN);
+ }

- /*
- * Secondly, Find the watchdog timer MMIO address
- * from SBResource_MMIO register.
- */
- if (tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
- /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
- pci_read_config_dword(sp5100_tco_pci,
- SP5100_SB_RESOURCE_MMIO_BASE, &val);
- } else {
- /* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
- val = sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN);
- }
-
- /* The SBResource_MMIO is enabled and mapped memory space? */
- if ((val & (SB800_ACPI_MMIO_DECODE_EN | SB800_ACPI_MMIO_SEL)) ==
+ /* The SBResource_MMIO is enabled and mapped memory space? */
+ if ((val & (SB800_ACPI_MMIO_DECODE_EN | SB800_ACPI_MMIO_SEL)) !=
SB800_ACPI_MMIO_DECODE_EN) {
+ pr_notice("failed to find MMIO address, giving up.\n");
+ ret = -ENODEV;
+ goto unreg_region;
+ }
/* Clear unnecessary the low twelve bits */
val &= ~0xFFF;
/* Add the Watchdog Timer offset to base address. */
val += SB800_PM_WDT_MMIO_OFFSET;
/* Check MMIO address conflict */
- if (request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
- dev_name)) {
- pr_debug("Got 0x%04x from SBResource_MMIO register\n",
- val);
- goto setup_wdt;
- } else
+ if (!request_mem_region_exclusive(val, SP5100_WDT_MEM_MAP_SIZE,
+ dev_name)) {
pr_debug("MMIO address 0x%04x already in use\n", val);
- } else
- pr_debug("SBResource_MMIO is disabled(0x%04x)\n", val);
-
- pr_notice("failed to find MMIO address, giving up.\n");
- ret = -ENODEV;
- goto unreg_region;
+ ret = -EBUSY;
+ goto unreg_region;
+ }
+ pr_debug("Got 0x%04x from SBResource_MMIO register\n", val);
+ }

-setup_wdt:
tcobase_phys = val;

tcobase = ioremap(val, SP5100_WDT_MEM_MAP_SIZE);
@@ -472,7 +468,7 @@ static int sp5100_tco_setupdevice(void)
tco_timer_stop();

release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
- /* Done */
+
return 0;

unreg_mem_region:
--
2.7.4
\
 
 \ /
  Last update: 2017-12-24 22:07    [W:0.156 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site