lkml.org 
[lkml]   [2017]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/9] ARM: dts: imx7-colibri: move and rename USB Host power regulator
On Tue, Dec 19, 2017 at 07:10:30PM +0100, Stefan Agner wrote:
> The Colibri default which enables USB Host power is not necessarily
> tied to the OTG2 controller, some carrier board use the pin to
> control USB power for both controllers. Hence name the pinctrl
> group more generic.
>
> Also move the regulator to the generic eval-v3 device tree since
> the regulator is always on the carrier board. In the Colibri iMX7S
> case the regulator is just not used. This allows to reuse the
> regulator in a upcoming SKU Colibri iMX7D 1GB with eMMC.
>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

Applied all, thanks.

\
 
 \ /
  Last update: 2017-12-21 09:30    [W:0.160 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site