lkml.org 
[lkml]   [2017]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] spi: Add a sysfs interface to instantiate devices
Date
On Thu, 2017-12-21 at 14:03 -0600, Kyle Roeschley wrote:
> Add a sysfs interface to instantiate and delete SPI devices using the
> spidev driver. This can be used when developing a driver on a
> self-soldered board which doesn't yet have proper SPI device declaration
> at the platform level, and presumably for various debugging situations.
>
> Inspired by 99cd8e25875a ("i2c: Add a sysfs interface to instantiate
> devices").

The i2c interface allows one to specify the type of device to create.
Why must this interface be linked to spidev and only capable of
creating spidev devices?

>
> Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
> ---
> Documentation/spi/spi-summary | 14 ++++++++
> drivers/spi/spi.c | 78 +++++++++++++++++++++++++++++++++++++++++++
> include/linux/spi/spi.h | 3 ++
> 3 files changed, 95 insertions(+)
>
> diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
> index 1721c1b570c3..51d9747c4426 100644
> --- a/Documentation/spi/spi-summary
> +++ b/Documentation/spi/spi-summary
> @@ -339,6 +339,20 @@ up the spi bus master, and will likely need spi_new_device() to provide the
> board info based on the board that was hotplugged. Of course, you'd later
> call at least spi_unregister_device() when that board is removed.
>
> +Alternatively, a sysfs interface was added to let the user create devices which
> +using the spidev driver. This interface is made of 2 attribute files which are
> +created in every SPI master directory: new_device and delete_device. Both files
> +are write only and you must write the decimal SPI chip select number to them in
> +order to properly instantiate or delete a SPI device. As no two devices can be
> +attached to the same master with the same chip select line, the chip select
> +number is sufficient to uniquely identify the device to be deleted.
> +
> +Example:
> +# echo 1 > /sys/class/spi_master/spi0/new_device
> +
> +In general, this interface should only be used when in-kernel device
> +declaration can't be done.
> +
> When Linux includes support for MMC/SD/SDIO/DataFlash cards through SPI, those
> configurations will also be dynamic. Fortunately, such devices all support
> basic device identification probes, so they should hotplug normally.
> diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
> index b33a727a0158..648ccdf359f9 100644
> --- a/drivers/spi/spi.c
> +++ b/drivers/spi/spi.c
> @@ -242,8 +242,85 @@ static const struct attribute_group spi_controller_statistics_group = {
> .attrs = spi_controller_statistics_attrs,
> };
>
> +static ssize_t
> +new_device_store(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct spi_controller *ctlr = container_of(dev, struct spi_controller,
> + dev);
> + struct spi_device *spi;
> + struct spi_board_info bi = {
> + .modalias = "spidev",
> + .max_speed_hz = ctlr->max_speed_hz,
> + };
> +
> + if (kstrtou16(buf, 0, &bi.chip_select) < 0)
> + return -EINVAL;
> +
> + spi = spi_new_device(ctlr, &bi);
> + if (!spi) {
> + dev_err(dev, "can't create new device\n");
> + return -ENXIO;

I2C returns -EINVAL

> + }
> +
> + mutex_lock(&ctlr->bus_lock_mutex);
> + list_add_tail(&spi->userspace_device, &ctlr->userspace_devices);
> + mutex_unlock(&ctlr->bus_lock_mutex);
> +
> + dev_info(dev, "created spidev device %s\n", dev_name(&spi->dev));
> +
> + return count;
> +}
> +static DEVICE_ATTR_WO(new_device);
> +
> +static ssize_t
> +delete_device_store(struct device *dev, struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct spi_controller *ctlr = container_of(dev, struct spi_controller,
> + dev);
> + struct spi_device *spi, *next;
> + int ret = -ENXIO;
> + u16 cs;
> +
> + if (kstrtou16(buf, 0, &cs) < 0)
> + return -EINVAL;
> +
> + mutex_lock(&ctlr->bus_lock_mutex);
> + list_for_each_entry_safe(spi, next, &ctlr->userspace_devices,
> + userspace_device) {
> + if (spi->chip_select != cs)
> + continue;
> +
> + dev_info(dev, "deleting spidev device %s\n",
> + dev_name(&spi->dev));
> + list_del(&spi->userspace_device);
> + spi_unregister_device(spi);
> + ret = count;
> + break;
> + }
> + mutex_unlock(&ctlr->bus_lock_mutex);
> +
> + if (ret == -ENXIO)
> + dev_err(dev, "can't find spidev device %u in list\n", cs);
> +
> + return ret;
> +}
> +static DEVICE_ATTR_WO(delete_device);
> +
> +static struct attribute *spi_controller_userspace_attrs[] = {
> + &dev_attr_new_device.attr,
> + &dev_attr_delete_device.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group spi_controller_userspace_group = {
> + .attrs = spi_controller_userspace_attrs,
> +};
> +
> static const struct attribute_group *spi_master_groups[] = {
> &spi_controller_statistics_group,
> + &spi_controller_userspace_group,
> NULL,
> };
>
> @@ -2129,6 +2206,7 @@ int spi_register_controller(struct spi_controller *ctlr)
> return id;
> ctlr->bus_num = id;
> }
> + INIT_LIST_HEAD(&ctlr->userspace_devices);
> INIT_LIST_HEAD(&ctlr->queue);
> spin_lock_init(&ctlr->queue_lock);
> spin_lock_init(&ctlr->bus_lock_spinlock);
> diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
> index bc6bb325d1bf..f7255745326d 100644
> --- a/include/linux/spi/spi.h
> +++ b/include/linux/spi/spi.h
> @@ -172,6 +172,8 @@ struct spi_device {
> /* the statistics */
> struct spi_statistics statistics;
>
> + struct list_head userspace_device;
> +
> /*
> * likely need more hooks for more protocol options affecting how
> * the controller talks to each chip, like:
> @@ -410,6 +412,7 @@ struct spi_controller {
> struct device dev;
>
> struct list_head list;
> + struct list_head userspace_devices;
>
> /* other than negative (== assign one dynamically), bus_num is fully
> * board-specific. usually that simplifies to being SOC-specific.
\
 
 \ /
  Last update: 2017-12-21 22:05    [W:2.007 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site