lkml.org 
[lkml]   [2017]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v6 01/18] PCI: dwc: Use the DMA-API to get the MSI address
Date
On Wednesday, December 20, 2017 2:10 PM, Joao Pinto wrote:
>
> Hi Niklas,
>
> Às 11:29 PM de 12/19/2017, Niklas Cassel escreveu:
> > Use the DMA-API to get the MSI address. This address will be written to
> > our PCI config space and to the register which determines which AXI
> > address the DWC IP will spoof for incoming MSI irqs.
> >
> > Since it is a PCIe endpoint device, rather than the CPU, that is
> supposed
> > to write to the MSI address, the proper way to get the MSI address is by
> > using the DMA API, not by using virt_to_phys().
> >
> > Using virt_to_phys() might work on some systems, but using the DMA API
> > should work on all systems.
> >
> > This is essentially the same thing as allocating a buffer in a driver
> > to which the endpoint will write to. To do this, we use the DMA API.
> >
> > Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
> > ---
> > drivers/pci/dwc/pcie-designware-host.c | 15 ++++++++++++---
> > drivers/pci/dwc/pcie-designware.h | 3 ++-
> > 2 files changed, 14 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/pci/dwc/pcie-designware-host.c
> b/drivers/pci/dwc/pcie-designware-host.c
> > index 81e2157a7cfb..bf558df5b7b3 100644
> > --- a/drivers/pci/dwc/pcie-designware-host.c
> > +++ b/drivers/pci/dwc/pcie-designware-host.c
> > @@ -83,10 +83,19 @@ irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
> >
> > void dw_pcie_msi_init(struct pcie_port *pp)
> > {
> > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > + struct device *dev = pci->dev;
> > + struct page *page;
> > u64 msi_target;
> >
> > - pp->msi_data = __get_free_pages(GFP_KERNEL, 0);
> > - msi_target = virt_to_phys((void *)pp->msi_data);
> > + page = alloc_page(GFP_KERNEL);
> > + pp->msi_data = dma_map_page(dev, page, 0, PAGE_SIZE,
> DMA_FROM_DEVICE);
> > + if (dma_mapping_error(dev, pp->msi_data)) {
> > + dev_err(dev, "failed to map MSI data\n");
> > + __free_page(page);
> > + return;
> > + }
> > + msi_target = (u64)pp->msi_data;
> >
> > /* program the msi_data */
> > dw_pcie_wr_own_conf(pp, PCIE_MSI_ADDR_LO, 4,
> > @@ -187,7 +196,7 @@ static void dw_msi_setup_msg(struct pcie_port *pp,
> unsigned int irq, u32 pos)
> > if (pp->ops->get_msi_addr)
> > msi_target = pp->ops->get_msi_addr(pp);
> > else
> > - msi_target = virt_to_phys((void *)pp->msi_data);
> > + msi_target = (u64)pp->msi_data;
> >
> > msg.address_lo = (u32)(msi_target & 0xffffffff);
> > msg.address_hi = (u32)(msi_target >> 32 & 0xffffffff);
> > diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-
> designware.h
> > index e5d9d77b778e..ecdede68522a 100644
> > --- a/drivers/pci/dwc/pcie-designware.h
> > +++ b/drivers/pci/dwc/pcie-designware.h
> > @@ -14,6 +14,7 @@
> > #ifndef _PCIE_DESIGNWARE_H
> > #define _PCIE_DESIGNWARE_H
> >
> > +#include <linux/dma-mapping.h>
> > #include <linux/irq.h>
> > #include <linux/msi.h>
> > #include <linux/pci.h>
> > @@ -168,7 +169,7 @@ struct pcie_port {
> > const struct dw_pcie_host_ops *ops;
> > int msi_irq;
> > struct irq_domain *irq_domain;
> > - unsigned long msi_data;
> > + dma_addr_t msi_data;
> > DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
> > };
> >
> >
>
> Makes total sense! Thanks.
>
> Acked-by: Joao Pinto <jpinto@synopsys.com>

Acked-by: Jingoo Han <jingoohan1@gmail.com>

Best regards,
Jingoo Han


\
 
 \ /
  Last update: 2017-12-21 17:44    [W:0.147 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site