lkml.org 
[lkml]   [2017]   [Dec]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 4/5] DTS: gta04: add uart2 child node for w2sg00x4
* H. Nikolaus Schaller <hns@goldelico.com> [171130 23:52]:
> GTA04 has a W2SG0004/84 connected to UART2 of the OMAP3
> processor. A GPIO can pulse the on/off toggle switch.
>
> The VSIM regulator is used to power on/off the LNA of an external
> active GPS antenna so that a driver can turn the LNA off if GPS is
> not needed to save battery energy.
>
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>

Sounds like Greg's going to take the whole series, so for this
patch:

Acked-by: Tony Lindgren <tony@atomide.com>

> ---
> arch/arm/boot/dts/omap3-gta04.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
> index 4504908c23fe..1ad744a25c36 100644
> --- a/arch/arm/boot/dts/omap3-gta04.dtsi
> +++ b/arch/arm/boot/dts/omap3-gta04.dtsi
> @@ -477,6 +477,13 @@
> &uart2 {
> pinctrl-names = "default";
> pinctrl-0 = <&uart2_pins>;
> +
> + gps: gps {
> + compatible = "wi2wi,w2sg0004";
> + lna-supply = <&vsim>; /* LNA regulator */
> + /* GPIO_145: trigger for on/off-impulse for w2sg0004 */
> + enable-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
> + };
> };
>
> &uart3 {
> --
> 2.12.2
>

\
 
 \ /
  Last update: 2017-12-21 15:54    [W:0.243 / U:1.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site