lkml.org 
[lkml]   [2017]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/9] ARM: dts: imx7-colibri: make sure multiplexed pins are not active
Date
The Colibri pins PWM<A> and <D> are multiplexed on the module, make
sure the secondary SoC pin is not active.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
---
arch/arm/boot/dts/imx7-colibri.dtsi | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 60ea7557d8c9..dae6b561145b 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -507,6 +507,7 @@
pinctrl_pwm1: pwm1-grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x79
+ MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x4
>;
};

@@ -525,6 +526,7 @@
pinctrl_pwm4: pwm4-grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x79
+ MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x4
>;
};

--
2.15.1
\
 
 \ /
  Last update: 2017-12-19 19:12    [W:0.111 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site