lkml.org 
[lkml]   [2017]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v5 01/18] PCI: dwc: Use the DMA-API to get the MSI address
    On Tue, Dec 19, 2017 at 12:45:30PM +0000, Gustavo Pimentel wrote:
    > Tested-By: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
    > Using an arc board with USB and SATA end points with a root complex PCIe
    > IP core version 5.00, I ran the the following tests:
    > - I checked that all end points were listed correctly;
    > - I checked that no PCI related errors was present in dmesg;
    > - I copied a file from arc to the USB flash drive and checked the
    > checksum;
    > - I copied a file from USB flash drive to the ARC and checked the
    > checksum;
    > - I copied a file from arc to the SATA disk and checked the checksum;
    > - I copied a file from SATA disk to the arc and checked the checksum;
    > - I copied a file from USB flash drive to the SATA disk and checked the
    > checksum;
    > - I copied a file from SATA disk to the USB flash drive and checked the
    > checksum;
    > - I checked that no PCI related errors was present in dmesg;
    >
    > Everything seemed normal to me.

    Thank you very much. I would still need ACKs from the respective
    maintainers (Joao/Jingoo/Kishon) in order to push this upstream please.

    Thanks,
    Lorenzo

    > On 18/12/2017 16:11, Gustavo Pimentel wrote:
    >
    > Hi Lorenzo,
    >
    > Yes, I have retrieve patches and performed some basic tests without having any
    > problems till now.
    >
    > However, I'm still trying to test the changes with our automated system. It's
    > being very difficult to find a time slot available for running this tests.
    >
    > I hope in this week I could give you go/not go flag. Sorry the delay...
    >
    > Regards,
    >
    > Gustavo
    >
    >
    > On 18/12/2017 15:57, Lorenzo Pieralisi wrote:
    >
    > Hi Gustavo,
    >
    > On Thu, Dec 14, 2017 at 12:38:04PM +0000, Gustavo Pimentel wrote:
    >
    > Ok. I will compile and test it now.
    >
    > Have you managed to retrieve the patches and test them ?
    >
    > Thank you,
    > Lorenzo
    >
    >
    > Thanks.
    >
    >
    > On 14/12/2017 12:22, Lorenzo Pieralisi wrote:
    >
    > On Thu, Dec 14, 2017 at 12:16:38PM +0000, Gustavo Pimentel wrote:
    >
    > Hi Niklas and Lorenzo,
    >
    > I'm going to work on PCI software development now as told by Joao and I will
    > test your code now.
    >
    > I was retrieving the patches through the patchwork
    > https://urldefense.proofpoint.com/v2/url?u=https-3A__patchwork.ozlabs.org_project_linux-2Dpci_list_-3Fsubmitter-3D65580&d=DwIBAg&c=DPL6_X_6JkXFx7AXWqB0tg&r=bkWxpLoW-f-E3EdiDCCa0_h0PicsViasSlvIpzZvPxs&m=paO6WYeoTil-HWIJVBhwaWcIZP7r95MZNRzKMN6kprU&s=yjtNhJKPJdsHD_A52xWSD2g_YNHuLhO1YADKsPaPsio&e= and I
    > notice that its missing the patch 13 and 17, is this right?
    >
    > No, you just have to refine the filter, I marked the DT bindings as
    > ready to be applied that's why they do not show up (and by the way
    > you can test the series even without those two patches - that are just
    > DT bindings).
    >
    > Thanks,
    > Lorenzo
    >
    >
    > If not, can you give me both patches location?
    >
    > Thanks.
    >
    >
    > On 13/12/2017 17:21, Joao Pinto wrote:
    >
    > Hi Niklas,
    >
    > ??s 1:59 PM de 12/13/2017, Niklas Cassel escreveu:
    >
    > On Thu, Nov 30, 2017 at 03:28:43PM +0000, Lorenzo Pieralisi wrote:
    >
    > Jingoo, Joao,
    >
    > I am expecting your testing on the series and ACKs on the dwc related
    > patches please, according to v4 review - I will mark them as needs
    > review/ACK waiting for you to chime in.
    >
    > v4 thread:
    >
    > https://urldefense.proofpoint.com/v2/url?u=https-3A__patchwork.ozlabs.org_patch_833882_&d=DwIBAg&c=DPL6_X_6JkXFx7AXWqB0tg&r=s2fO0hii0OGNOv9qQy_HRXy-xAJUD1NNoEcc3io_kx0&m=CQAV8rCgm2jd7m3iSWL5vBbGTqSc7yN3N7zeQDz-ZUY&s=mqyDi45qm4qE0jcm0KviYAoLHmMXMMIWEW-gAR0RKOw&e=
    >
    >
    > Hello Lorenzo, Jingoo, Joao,
    >
    > Tomorrow another 2 weeks has passed.
    > V1 of this patch series was posted on 2017-10-13.
    >
    > Sorry, I have been tight up with a debug session and not able to check this out.
    > Adding Gustavo in CC that is now also working in PCI software development.
    > I am going to check the code ASAP and we will test it as soon as the debug is
    > finished.
    >
    > Thanks.
    >
    >
    > I'm a bit worried that this patch series will not make it to linux-next
    > in time for this patch series to be included in the 4.16 pull request.
    >
    > Here is the V5 patch series:
    > https://urldefense.proofpoint.com/v2/url?u=https-3A__patchwork.ozlabs.org_project_linux-2Dpci_list_-3Fseries-3D14364&d=DwIBAg&c=DPL6_X_6JkXFx7AXWqB0tg&r=s2fO0hii0OGNOv9qQy_HRXy-xAJUD1NNoEcc3io_kx0&m=CQAV8rCgm2jd7m3iSWL5vBbGTqSc7yN3N7zeQDz-ZUY&s=qXtUHFXK7_nCndQob0I0qDByBdJsL7rRjZ9cx7c847U&e=
    >
    > Perhaps any maintainer of a designware based PCIe driver could
    > help out and test this patch series?
    >
    > Regards,
    > Niklas

    \
     
     \ /
      Last update: 2017-12-19 15:10    [W:3.091 / U:0.108 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site